Jump to content
SAU Community

Recommended Posts

No where near as much as my mates 32gtr that has gone through about 5 motor and different turbo applications to achieve a low 10 sec pass.

Spend 5k on an XR6T and you could run 10 sec pass.

380rwkw

Auto

Diff gears

slicks

=10 sec pass

i spent 2 k on mine to achieve from 195rwkw to 300rwkw.

Also to the arguement that they are no good at track work,If you seen one set with the right springs and a manual trans and good driver they can mix it with most cars.

2K for 300rwkw? Gees that's hard to believe. An APS phase 2 kit cost at least 5K and they claim it delievers 330kw at the fly. So i'm guessing you'll get 270rwkw from that.

There's a guy on XR6T forum that does 11.5 1/4 miles and I'm sure he's spent at least 5K doing it up so 5K for 10 sec passes is hard to believe.

Don't you need to change injectors(1K+)

edit+tune (1K+)

There's already 2K.

But then again you are doing everything yourself so you are saving a fair bit of money whereas most other people just give the car to someone else for them to do the work. That's where the $$$ come into play.

  • Replies 129
  • Created
  • Last Reply

Top Posters In This Topic

Trust me.That guy is craig.His car is a weapon.As for mine it is full APS Phase 2 running around 360fwkw.

There is so many was to mod a T now it doesnt cost much money.

I just went to the airpowersystems site. Phase 2 is meant to be 330fwkw.

You must of bought the aps kit 2nd hand because 2K wont even buy you the phase 1 kit.

2K for 300rwkw? Gees that's hard to believe. An APS phase 2 kit cost at least 5K and they claim it delievers 330kw at the fly. So i'm guessing you'll get 270rwkw from that.

There's a guy on XR6T forum that does 11.5 1/4 miles and I'm sure he's spent at least 5K doing it up so 5K for 10 sec passes is hard to believe.

Don't you need to change injectors(1K+)

edit+tune (1K+)

There's already 2K.  

But then again you are doing everything yourself so you are saving a fair bit of money whereas most other people just give the car to someone else for them to do the work. That's where the $$$ come into play.

There is many Unichip computers on the market,Injectors are getting cheap to source second hand,The auto just needs a shift module fitted"$60" and a oil cooler to be a super positive shift and the exhaust isnt dear if you know what combo to run.

I just went to the airpowersystems site. Phase 2 is meant to be 330fwkw.

You must of bought the aps kit 2nd hand because 2K wont even buy you the phase 1 kit.

I am with FIST Performance in Brissy.APS 330fwkw claim is only a guideline and all cars perform to how they are tuned.Im running 11psi with stock intercooler.My injectors are running about 90% duty cycle.I could easily run 14 psi and up some more fuel with a $800 intercooler and achieve 360rwkw.If i wont more i up the injectors again.I then regear the final ratio with a MK 2 final drive out of a manual with some 17 inch rims and with the right conditons and a set of borrowed slicks 10 sec Qauters are there.

Check out APS 10.98 Phase 3 car

there is many cheap piggy back cpu conversions around so sourcing them with injectors and exhausts and intercoolers isnt hard or exspensive.The turbo is rated to 650 hp or close to it.So the XR6T is a tunable weapon and will more so be in the future as manufactures of parts jump at each other for the competition.

I work with all makes including alot of nissan skylines,200 sx,supras and anything else that has a turbo.

  • 1 month later...
  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I've uploaded logs / the current map to Gdrive if anyone has any ideas. https://drive.google.com/drive/folders/1FPnr22Z-EilG7tYdHSi0Qb07P2jfFLKV?usp=sharing
    • I'm running a Haltech Platinum Pro with the stock map for the RB20DET + tweaks for my build. When I started it this morning, the IAT was at 32F/0C (Outside temp was ~42F) and the AFRs went off the scale for my AEM gauge. I let it run for ~30 seconds then turned it off. I then did a smoke test, by hooking into a vacuum line directly behind the throttle body, and confirmed there was no leaks ( i let the smoke tester run for ~5 minutes / confirmed it was generating smoke before hand ). I then started the car again, after fixing a power steering leak.... and it seemed to be happy for ~30 seconds (was at ~11/12), but then seemingly shot back up to ~18 again. I then let the car run for a few minutes, thinking this was just cold start related, but the AFRs never came back down. I didn't let the car fully warm up, so maybe this makes sense, but I'm not sure what to do? The AFRs, when I last ran it, were normal, but because of personal reasons I haven't been able to break in the car. It was rebuilt last year. Engine / Mod list: Supertec pistons Spool rods Kelford 270 cams and Springs Stock crank Deatschwerks 900cc injectors Walbro 255 (Wired directly to the battery relocated in the trunk) NKG Audi R8 Coil packs + Conversion Harnesses from Wiring Specialties Holset HY35 turbo Haltech Platinum Pro ECU Haltech boost controller (wired in for high boost RB25 Neo transmission + needed bits for the speedo to work  
    • Not great at getting the camera out fast enough for cars driving. Even in traffic. S15 is in front of the kei truck.
×
×
  • Create New...