Jump to content
SAU Community

R34GTT Vs XR6T!!!??!!


Recommended Posts

No where near as much as my mates 32gtr that has gone through about 5 motor and different turbo applications to achieve a low 10 sec pass.

Spend 5k on an XR6T and you could run 10 sec pass.

380rwkw

Auto

Diff gears

slicks

=10 sec pass

i spent 2 k on mine to achieve from 195rwkw to 300rwkw.

Also to the arguement that they are no good at track work,If you seen one set with the right springs and a manual trans and good driver they can mix it with most cars.

2K for 300rwkw? Gees that's hard to believe. An APS phase 2 kit cost at least 5K and they claim it delievers 330kw at the fly. So i'm guessing you'll get 270rwkw from that.

There's a guy on XR6T forum that does 11.5 1/4 miles and I'm sure he's spent at least 5K doing it up so 5K for 10 sec passes is hard to believe.

Don't you need to change injectors(1K+)

edit+tune (1K+)

There's already 2K.

But then again you are doing everything yourself so you are saving a fair bit of money whereas most other people just give the car to someone else for them to do the work. That's where the $$$ come into play.

Link to comment
Share on other sites

  • Replies 129
  • Created
  • Last Reply

Top Posters In This Topic

Trust me.That guy is craig.His car is a weapon.As for mine it is full APS Phase 2 running around 360fwkw.

There is so many was to mod a T now it doesnt cost much money.

I just went to the airpowersystems site. Phase 2 is meant to be 330fwkw.

You must of bought the aps kit 2nd hand because 2K wont even buy you the phase 1 kit.

Link to comment
Share on other sites

2K for 300rwkw? Gees that's hard to believe. An APS phase 2 kit cost at least 5K and they claim it delievers 330kw at the fly. So i'm guessing you'll get 270rwkw from that.

There's a guy on XR6T forum that does 11.5 1/4 miles and I'm sure he's spent at least 5K doing it up so 5K for 10 sec passes is hard to believe.

Don't you need to change injectors(1K+)

edit+tune (1K+)

There's already 2K.  

But then again you are doing everything yourself so you are saving a fair bit of money whereas most other people just give the car to someone else for them to do the work. That's where the $$$ come into play.

There is many Unichip computers on the market,Injectors are getting cheap to source second hand,The auto just needs a shift module fitted"$60" and a oil cooler to be a super positive shift and the exhaust isnt dear if you know what combo to run.

Link to comment
Share on other sites

I just went to the airpowersystems site. Phase 2 is meant to be 330fwkw.

You must of bought the aps kit 2nd hand because 2K wont even buy you the phase 1 kit.

I am with FIST Performance in Brissy.APS 330fwkw claim is only a guideline and all cars perform to how they are tuned.Im running 11psi with stock intercooler.My injectors are running about 90% duty cycle.I could easily run 14 psi and up some more fuel with a $800 intercooler and achieve 360rwkw.If i wont more i up the injectors again.I then regear the final ratio with a MK 2 final drive out of a manual with some 17 inch rims and with the right conditons and a set of borrowed slicks 10 sec Qauters are there.

Check out APS 10.98 Phase 3 car

Link to comment
Share on other sites

there is many cheap piggy back cpu conversions around so sourcing them with injectors and exhausts and intercoolers isnt hard or exspensive.The turbo is rated to 650 hp or close to it.So the XR6T is a tunable weapon and will more so be in the future as manufactures of parts jump at each other for the competition.

I work with all makes including alot of nissan skylines,200 sx,supras and anything else that has a turbo.

Link to comment
Share on other sites

  • 1 month later...
  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share




  • Similar Content

  • Latest Posts

    • Suspension bush. Got urethane bushes in the upper arms?
    • thanks for heads up on actuators - will sort something as back up or solution as yes dont need that have enough trouble but no doubt some addition of something to spares boxes is required yes have a clue about WTAC but nothing has been officially put out yet so will wait to see exact details Pro class is, has been and will become a draw card for lap records and one off builds for show and thats about it I think - be interesting to see how open they make it Pro am is the old Pro in reality Open class will be split into 2 with slicks and 050's with no doubt slight variances in allowable drivers and changes in aero Clubsprint + apparently a true street class   They have to and are refreshing it all and bringing things up to current standards and need to 100% adhere to rules because whether people like it or not / or say it or not - for alot of competitors it is sheep stations and has been for a while when Im getting told I was illegal because i cut my rear bumper too high and yet others where in the grey areas of legality with everything from engines, suspension, ride heights and more serious influences it actually got quite out of control and heated this year so as much as I may be impacted by some of the changes and prob spit the dummy when I have to spend money changing things I think its a good thing for all
    • I can’t tell if it’s suspension related or maybe wheel bearing or motor mount.  IMG_6209.MOV
    • Start with a multimeter, and see if you're getting power at the TPS. There should be a manual for your car somewhere on these forums and it'll have the info for what closed TPS signal voltage is, and how it should sweep to full throttle. Same as for other sensors / valves.   Have you checked things like your base timing etc? See if anything looks amiss there too?
    • here are 2x options to consider: https://www.selby.com.au/price-promise/tonewinner-sw-d6000-subwoofer.html https://www.apollohifi.com.au/svs-pb-3000-ported-subwoofer-black-ash-pre-order.html I'm waiting for a good BF/CM sale and will pull the trigger on a new sub, I do like the SVS PB-3000 (13") but you could nearly buy 2x Tonewinner D6000s (15")
×
×
  • Create New...