Jump to content
SAU Community

Removing weather shields


Recommended Posts

i was wondering the same thing because i plan on taking mine off as soon as i get time, i wasnt sure about how to get the tags at the back of the front door off as there between the black plastic strip that goes up next to the glass and the door frame. (from memory, could be wrong)

does the black plastic strip need to come off first to get to the tag?

Link to comment
Share on other sites

i really can't remember

if i remember rightly you gotta wind the window down, then go from the inside, it took me one go to get this right... one go in the sense i didn't do it right and bent one of my chromes a little bit...

definately NOT crunk.

Link to comment
Share on other sites

id like to keep mine on, but im missing the front left one so will take the rest off, havent worried about it too much but would look better with either all of them or none of them...

i probabl should have the aircon canister regassed and refitted though,

another for the very very long and growing to do list

Link to comment
Share on other sites

Well when mine landed one was missing. And by the time the compliancing was done only one was left on! so now i've taken all of them off but the metal bits are still on.

So from the inside ha? I'll have to take another look.

Also can you get new chrome strips? Mine are in really poor shape.

Hopefully by next week my ceffie will be on the road. After being in the country for 2 months now! Will post pics as soon as its registered and cleaned up. Atm it's in my gararge on stands (putting in new coilovers to pass blue slip)

Link to comment
Share on other sites

Also can you get new chrome strips? Mine are in really poor shape.

yes you can they cost $6 and come in a tube called "autosol" scrub like crazy but!

Link to comment
Share on other sites

just removed mine then :)

only takes 5 minute,

front doors: the rear screw is visible on the inside, the other 2 screws are under the wide horizontal rubber section of seal, just peel back the small section you need too to get a screw driver in there

rear doors: theres only a screw on the front tag which is visible on the inside, just remove the screw and slide the shield forward gently and itll come straight off,

hope that helps.

now to get some auutosol

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • From there, as the manual says....assembly is the reverse of disassembly, no tricks worth mentioning Much better (for me)
    • In my case, the standard wheel I had was in good condition but the buttons had more wear, so I swapped them across from the original wheel from the car. The plastic rear cover is held on by 4 tabs, and once the wiring is removed you can get access to 2 screws on each side the hold the buttons in From there I just swapped the wiring over. What was interesting is the standard style wheel is 2.0kg but the carbon fibre one is 50% heavier at 2.9kg. It even has a weight inside the wheel at the top to make up for some sort of imbalance in the design. weird
    • Once the airbag is off, to remove the steering wheel.... Undo the 2 plugs into the clock spring, and the horn connector from it's clip. Hit the 19mm nut with a rattle gun (preferably) or if you don't' have one, you probably want an assistant to hold the wheel in place while you use a breaker bar to undo the nut Then, screw the nut back on 3 turns, and pull the wheel sharply towards you. If that doesn't work hit it medium force with a rubber mallet on either side, or possible behind if you can get there. If that all fails (it shouldn't!) you might need a steering wheel puller
    • So, to next task....the carbon fibre steering wheel was either an expensive factory option or a chinesium special. Either way, I don't like either the flat bottom or thick ring style, so it had to go So...to remove the steering wheel.... First, disconnect battery negative and stomp on the brake pedal for a few seconds. Then, remove the small circular covers on each side of the wheel's rear surround to uncover the airbag clips. You need to push something like a flat bladed screw driver through, to push the steel clip inwards and pull the side of the airbag forward. Once you've done the easy side, same on the centre console side. You can see the tab you are shooting for circled in red Then, disconnect the horn spade connector and for the yellow airbag plug you need to get something small under the black locking tab to pop it out, then the connector releases......airbag is off  
    • @99RS4just wondering if you ever took photos of the footwell lighting / how you bypassed the controller, im keen to haver footwell lighting come on when I open the doors too   
×
×
  • Create New...