Jump to content
SAU Community

EOI: Boost to 10PSI for R33 $10

benl1981
 Share

Recommended Posts

benl1981 Grand Master

benl1981

Posted
  • Author
Posted

Ok I have copper ones now. I am currently testing on other skylines.

I think it is safer if using the stock intercooler to run 9-9.5psi which is what the latest ones have been made to.

Please note these are mostly for stock cars. Please check you have the solenoid shown below otherwise this piece will not work.

If you want more boost you can easily drill out the provided piece (You will only need to take a 0.2mm bigger drill bit to make about 1-2psi increase). But it is better to run 9-9.5psi.

Ok You will get instructions I put together with illustrations on how to fit this piece and how to fit a boost gauge. And you wiill get the copper piece for $15 delivered.

Sorry about the price increase but I have broken a lot of small drill bits etc

I do have a few different size drill bits so you can let me know what boost you want to run but it will vary up to 1psi between cars so I want to really be a bit cautious and let you drill it out if you want more boost. The drill bits are only about $2 and you shouldn't break it as you will only be widening the hole a small amount

standardsolenoidsmall6wr.jpg

  • Replies 54
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

ApacheX Proficient

ApacheX

Posted
Posted
Ok I have copper ones now.  I am currently testing on other skylines.  

I think it is safer if using the stock intercooler to run 9-9.5psi which is what the latest ones have been made to.  

Please note these are mostly for stock cars.  Please check you have the solenoid shown below otherwise this piece will not work.

If you want more boost you can easily drill out the provided piece (You will only need to take a 0.2mm bigger drill bit to make about 1-2psi increase).   But it is better to run 9-9.5psi.

Ok You will get instructions I put together with illustrations on how to fit this piece and how to fit a boost gauge.  And you wiill get the copper piece for $15 delivered.

Sorry about the price increase but I have broken a lot of small drill bits etc

I do have a few different size drill bits so you can let me know what boost you want to run but it will vary up to 1psi between cars so I want to really be a bit cautious and let you drill it out if you want more boost.  The drill bits are only about $2 and you shouldn't break it as you will only be widening the hole a small amount

standardsolenoidsmall6wr.jpg

like this? (on right hand side)

image026.jpg

benl1981 Grand Master

benl1981

Posted
  • Author
Posted

Yeah I do. I'll be making some more over the next few days.

Most people are happy with 9-9.5psi. Not much gain on stock cooler over this.

I can kind of tailor it to what you want slightly, but there will be a bit of variation between skylines (up to 0.5psi). All the R33s tested on have had a stock intercooler, but I guess front mount shouldn't change things too much, maybe will run slightly higher boost.

I don't recommend over 9-9.5psi on the stock exhaust either.

benl1981 Grand Master

benl1981

Posted
  • Author
Posted

Pm replied. Sorry, I will get to everyone over the next few days. I've been busy at work etc. I will make up some more over the next few days.

Due to the amount of drill bits I've broken etc and the time involved the cost will be $20 including instructions on how to fit it (and how to fit aftermarket boost gauge), the piece, and clamps.

I think it is still reasonable value as it shouldn't need adjusting (you can widen the hole easily with a drill if you want slightly more boost), looks stock, and allows you to return to stock in a minute. You also don't even need to disconnect any hoses except off the solenoid. You also don't wreck your solenoid by putting a constant earth to it (which I had before), down the track I may use it for an electronic boost control so I don't want to fry it.

TommO Grand Master

TommO

Posted
Posted

I'd like to recommend benl1981 for being a great seller. Organised delivery of the product very fast, printed out the instructions for me in colour, and went the extra mile compared to what most sellers do.

Great, cheap product, with a decent performance gain.

Thanks again,

Tommo.

TommO Grand Master

TommO

Posted
Posted
ey, on the Ebay.com link you say the stock R33 run 4PSI under 4500RPM, is that right? i tought they run 7PSI, or is 7psi @7000rpm? correct me if im wrong.

: Refer to this SAU tech thread

I'm sure you can feel the power increase at 4500rpm.

Cheers,

Tommo.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Matvei27
      WTB noltec r32 front upper (camber) arms

      By Matvei27 · Posted

      Bump 
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      The cam I am actually putting in (a few posts up) is actually smaller than my current one. At least duration/overlap wise. All the chop stuff I hear just sounds like an engine running badly, because it is. I then envision driving it around in 1st gear and being massively sad about it bucking to the beat of said chop. There is an idle video of someone with a similar cam floating around the internet, but mine is a custom cam (so is his) so it'll never be the same, plus the fact exhausts are entirely different. What I want to do is put some bullet mufflers/race mufflers in to replace a couple sections straight pipes that currently replace the two extra cats that I don't need. But this is even further down the line!
    • MBS206
      Shoota's R33 GT-R RB30/26

      By MBS206 · Posted

      I can tell you now, when the bracket that the little hydraulic ram attaches to snaps, with a subframe, and V8 from an AMG C63 on it, it sounds like someone letting shotgun off right beside you. It leaves your ears ringing, and a huge thankfulness that you never ever put a body part under something heavy that's only supported by a hydraulic lift...
    • Neostead2000
      Water leaking into the rear trunk

      By Neostead2000 · Posted

      Still not a guarantee fix. I used a high quality butyl-mastiq (the black goo that's not really silicone nor polyurethane, same stuff they use from the factory that just spreads out like melty cheese), and I still get lots of water on both sides of the trunk when raining or washing the car. I also suspect the factory spoiler rubber gasket might not be sealing well, so I'm thinking of adding a thin layer of grey silicone around the bolt holes on both sides and see if that's where it also leaks from. The biggest issue is that these cars don't come with a drain hole on each side like other coupes and hatchbacks.
    • Ozdavroz
      Lifted R32? Jay (LowStandards) has you covered.

      By Ozdavroz · Posted

      I hate it, but maybe he could paint it Monster jam style and call it...godzilla?
×
×
  • Create New...