Jump to content
SAU Community

Recommended Posts

r32 gtr radiator is still single row also not much thicker, flows a little better apparently (than gts).

r33 radiators (both) are a bit taller not sure if they will fit, they wouldnt fit in my 180 but r32 gtr one did (also r32 gts fits)

i reckon forget all these as they are not much of an upgrade anyway, maybe get an aftermarket one - you definately need a new radiator?

erm... 115 degrees!

Wow better check it out, i did 4 laps at Phillip Island and a break then 4 laps after that and it only gets to 84.

Don't know if you have an oil cooler or not but a while ago my Gtr heat up a bit me and Troy ( YLWGTR ) went through so much trouble finding out why at the end i take the radiator out sent it to Highway radiator to pull the top tank out, they found out i have up to 75% blockage. Only stupid thing that they did were when i got my radiator back they sprayed it all Black.

Get it check out Marcus.

It is one complete attached core but contains 2 rows.

 

Have a good look, either that or you've been ripped. :)

not sure of exact terminology in terms of row or core, however I know when you take the cap off the radiators and look in there, on both items there is one thick tube and i would expect it to be the same all the way to the bottom of the radiators. The r33 one is stock in a r33 for sure and 99% sure the other is gtr, but hey maybe there isnt any or much diff between r32 gts/gtr ones.

ofcourse they are one overall core unit but how are they 2 row??

Wow better check it out, i did 4 laps at Phillip Island and a break then 4 laps after that and it only gets to 84.  

Don't know if you have an oil cooler or not but a while ago my Gtr heat up a bit me and Troy ( YLWGTR ) went through so much trouble finding out why at the end i take the radiator out sent it to Highway radiator to pull the top tank out, they found out i have up to 75% blockage. Only stupid thing that they did were when i got my radiator back they sprayed it all Black.

Get it check out Marcus.

Thanks for the warning, I know it's not good. I've got an oil cooler as well, and on the street the water temp never gets higher than 90.

Also note that Sunday was 30+ degrees at Sandown, and also PI affords much more cooling air to the radiator as it is faster :)

Will invest in a 40mm one when the funds allow!

Oh...  

 

Would have looked scary on the stock guage. :)

Stock gauges are crap! didn't actually move much past middle :confused:

I've got a Defi water temp gauge and it was beeping and flashing it's little brains out (and the temps matched the PFC temps)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...