Jump to content
SAU Community

Recommended Posts

Great, should be easy to get to then! is the space for it large? :/

I've just bought an Eclipse 4x70W RMS amp... whats the factory one rated at?

I hope the new one will fit in the same spot...

Very easy to access, you can fit another amp there i suppose but it might take a little bit of messing around as the stock amps are usually very small. You will work something out though im sure.

Very easy to access, you can fit another amp there i suppose but it might take a little bit of messing around as the stock amps are usually very small.  You will work something out though im sure.

My brother removed it for me today while he was doing the rest of the compliance work. He said there was no chance in hell my new amp would fit (and its not that big!)

My brother removed it for me today while he was doing the rest of the compliance work. He said there was no chance in hell my new amp would fit (and its not that big!)

You can fit an amp in same location but it requires some work like i said. You need to move the rear wiper assembly motor and new mounting holes for the amp. You need a bracket for the front end of the amp so you have something to affix too. Your better off fixing the amp somewhere else like the back of the seat, spare tyre well or the side of the wheel arch depending on what else you ahve in your boot. Play around with it and see where works best for you and the install your doing as there are plenty of options to mount it in there.

dont listen to gmb the only skyline he has is looking at timmyb's

WHAT DOES THIS HAVE TO DO WITH THE TOPIC, PLEASE KEEP THE SUBJECT ON TOPIC WOLVERINE11 AND IF YOU HAVE A PROBLEM WITH ME KEEP IT OFF THE FORUMS AS ITS NOT THE TIME OR THE PLACE :bs!:

it is when u keep crapping on to people about shit u dont know,

how can u give all this advice on skylines when u dont even have one??

WHO says i dont know, it doesn't take a rocket scientist to figure it out numb nuts. Like i said SAu is about helping people out, not sledging people or having a go to publically humilate people. If you dont have anything contructive to say and all you want to do is have a go at me then you know where i am. Leave it off the forums and stop hijacking peoples threads with posts that have absolutley no realevance to the topic :usuck:

LADIES!!!

everyone has a right for there input... whether its right or not.. Too bad..

Everyone is here to help each other... whether you have a skyline or not... if you know something and want to share it... Feel free..

Leave the crap off the forums..

LADIES!!!

everyone has a right for there input... whether its right or not.. Too bad..

Everyone is here to help each other... whether you have a skyline or not... if you know something and want to share it... Feel free..

Leave the crap off the forums..

COULDN'T OF SAID IT BETTER MYSELF IF I TRIED SKYGTRLINE. ITS A PITY THAT THERE ARE SOME PEOPLE OUT THERE THAT INSIST ON FARKING IT UP FOR THE REST OF US, AND ESPECIALLY THOSE THAT LIKE TO HAVE CHEAP SHOTS AT OTHERS THATS NOT EVEN RELEVANT TO THE TOPIC :kick:

Ok so all components aquired for the system and i have the materials for the SD of the front doors. I have my cabeling and the only thing im waiting on is a maxiblade type fuse. I'll take a couple of pics along the way and let you know how it all goes. Im aiming to ahve the complete system installed and doors SD in 2-3 days. Depending on how much help i get from a certain SAU member :D

A quick question, just installing the 6x9's on my R32 four door. I've just finished mounting, cutting and installing the 6x9's on my rear parcel shelf. How has everyone run the wire from there rear speakers to the stereo? I'm trying to follow the existing wiring of the factory loom but first off im having difficulty removing the rear seats (anyone removed them before?)

A quick question, just installing the 6x9's on my R32 four door. I've just finished mounting, cutting and installing the 6x9's on my rear parcel shelf. How has everyone run the wire from there rear speakers to the stereo? I'm trying to follow the existing wiring of the factory loom but first off im having difficulty removing the rear seats (anyone removed them before?)

No tricks, just get your fingertips under the seat on one side and yank it up hard then do the other side and it will lift out.

Remove the bolt on each side that holds the back rest then lift it up and ease it out past the seatbelts.

  • 2 weeks later...
when i took my back seat out i just used the end of a shifter and it went pop and it was out easy  :uh-huh:

i wish it was that easy for me and TimmyB yesterday, took us 10 mins to get the biatch off.

The clips appeared to be bent and we just couldn't get them free :chairshot

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That ring thing is interesting how it's holding everything together 
    • Hey guys. I have a 400R on its way to Australia from Japan currently and have a few questions I’m hoping others may be able to help with.   Wondering if anyone here has had any luck getting the Sat nav unit to work in Australia!? Assuming the Stereo is as simple as a band expanded and tv won’t work?  Seeing as they’re based off a Q50 which is Aus delivered is there any way to link that system to the nav? Nav modules and head unit are different part numbers and appear slightly different at the rear with plug ins etc. can I put my xtrail sd card into the rv37 and will that convert the maps or update to Australian? Has anyone got any advice here?     also has anyone fitted the factory remote start and Security system once it’s landed in Australia? I put an enquirey to Nissan Japan in via a third party, and they suggested it needs a Nissan Japan dealers device to setup and couldn’t guarantee if one here could do it or not. They can supply and I can physically fit it but to setup I would need a dealers device. Any information here would be appreciated also. I’ve seen one here with it fitted already prior to leaving Japan at a dealer/inporter, so clearly passes compliance and works when fitted Japan and doesn’t need changing here.      also, does the tyre inflation sensors work here? Does anything change with them when the vehicle arrives? Where are they actually situated? I’ve read they have batteries and they need to changing at times and seems like resetting involves the nav system?    any help here would be appreciated and any other aust specific information to help would be great. Looking forward to see what the current generation skyline is like and eager to see how many of the gadgets can be utilised here.  Thanks in advance 
    • Do need to take it with a pinch of salt. One of the adapter failures, they clearly had setup issues with the flywheel.  One of the slipping ones I spoke to and it was pretty clear the throwout was riding, rather than fix, just swapped to a new clutch.    These clutches are being put in anything from 5k offroad 4x4 beaters, GR yaris, 500hp commodores to 1200hp barra monsters. Bound to be some issues in some of them when they are not a simple bolt in affair due to the changes in height.    There is a lot going on in this picture and unless I did the job myself no way to tell what really happened. 
    • I did this mod in 2019  You just have to modify the top bracket of the ABS/TC/Fuel Pump Control ECU so it sits more upright and closer to the back seat and run a good quality positive battery lead from the engine bay, the negative lead i just bolted down to the body in the boot.
    • Damn... Not the feedback I want to hear.
×
×
  • Create New...