Jump to content
SAU Community

Squeak in Suspension


Recommended Posts

I had an almost identical problem (rattling in the back like someone left a spanner in the boot).

I took it to Pedders Suspension and for $14 they did a 28 point safety check (taking particular attention to the bushes/etc).

They said everything was 100% and the bushes were ok, only suggestion they had for the noise was coz my suspension is all adjustable they thought their may have been abit of movement.

But if there is some sort of grease/paste i can use on it to remove the noise then i might go back their and get them to investigate.

What do i need ?

mine did the same thing too.. rear left... problem was it was leaking oil. After driving on it for another 3000km, i decided to replace it as it was making the car go all over the road.

After I pulled the springs off I could tell why it drove like shit. There was basically no rebound at all.

Originally posted by N/A R33

Looks like it will be an easy fix.  Next chance I have I'll pull it down and have a look spread a bit of silicon grease about and hopefully the squeak will be gone.

Steve N

Whats this stuff cost and where do i apply it ? (Pics)

TAKE IT 2 PEDDERS, IF U WANT THE JOB DONE CHEAP U HAVE TO PULL YOUR BACK SEATS, REAR PARCEL SHELF OUT 2 GET THE SHOCKS OUT, SO IF U TAKE IT IN SOMEWERE AND UVE GOT EVERYTHING OUT YOULL PROBABLY SAVE $100 ON LABOUR COSTS, ONCE U HAVE PULLED EVERY THING APART IT ONLY TAKES ABOUT TEN MINUTES TO PULL THE SHOCKS OUT

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Cheapest option, find a NEO head. Put in good springs, decent cams, and send it to the moon. I rev mine to 8600RPM, gets me about 232km/h down the main straight at SMSP bouncing off the limiter in 4th. I've never dared to grab 5th 🥲
    • Gday mate, Personally in my car i run 450kw in an s2 rb25 so also hydraulic lifters and have always run it to 7500 RPM and using some baby 256 poncams with new but stock springs and retainers. While i cant speak on any experience with solid lifters i personally have had no issues with my hydraulic lifters which were just cleaned and set in an oil bath before assembly over 7 years ago. Over 8k RPM is cool IMO and if you are using the stock gearbox or just a box with longer ratios the higher rpm certainly could aid to maintain boost into the next gear as that was always something i struggled with as i have a 3582r also but a hypergear equivalent could aid that issue. In summary i would make a choice on the cam you want to use first then decide which springs and retainers work best with it and then you can toss up if you really need the solid lifters, if the car is mainly street i would learn towards keeping the hydraulic lifters as when installed properly and nothing too hektik going on around them they do the trick.  
    • Yucky. Things haven't gotten any better though. Now you have Emerson and Honeywell pushing these massive DCS/Scada things with proprietary hardware. They're not a PLC, they're not a computer, they're a...distibuted PLCish/DCSish monster of thing, that only they can program because they make the barriers to entry for anyone else so fricking high. And their developers are all located in the third/developing world (and India, in case anyone does not include that place in that category) and there are terrible failings of the ESl variety, of the care and common sense variety, and f**king forget about Functional Safety. Not a one of them has any idea what it means to comply with an IEC 615xx series standard.
    • All of the ECU grounds are to the chassis, the IGN grounds are to the cylinder head and i believe all the OEM body harness are left in original locations, im trying to work out if i can tell if the sensor voltage itself is losing any power to it from the very low ECU voltage. But yeah a manual pressure gauge will help in picking which path to actually chase. Also please dont bully my wiring plan i never designed it to be universally understood hopefully it still can make sense to you, im a wiring virgin.  1 thing i have just noticed the pressure sensor in question relays both pressure and temperature, the temperature reading holds nice and steady despite the low ecu voltage but the pressure reading is the one that jumps around alot so maybe it is really a pressure issue? wiring plan.xlsx
×
×
  • Create New...