Jump to content
SAU Community

Power FC Commander - No Display and Car No Start?

yogi000

By yogi000,
in General Automotive Discussion

 Share

Recommended Posts

yogi000 Mentor

yogi000

Posted
Posted

Hey Everyone,

I went to start my r32 gtst this morning......only to have the power fc display not come up and and the car not wanting to start. I noticed that the fuel pump kept pumping for more than the normal 2-3 seconds when the key was in the "ON" position.

Does this mean that my pfc is blown or something, can i check any fuses??? i check the relays and fuses under the bonnet. They're all ok.

Any Ideas anyone.....i'll put my nissan ECU back in tommorow but i'm running a z32 and 440 injectors with resistor pack , so i'm not sure if the car will run.

Can anyone help me???

Cheers

George

BHDave Grand Master

BHDave

Posted
Posted

Probably worth pulling the kick panel off and seeing if the pfc has the power on light working.

The fuel pump is triggered by the ecu from factory so i would expect the pfc has power to start the pump.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      First/Second Post

      By Duncan · Posted

      Welcome Alice......hope you have a bit more luck from here on! What was done in the build?  
    • svenskalice
      First/Second Post

      By svenskalice · Posted

      Hello! I'm new here, I have an R33 GTST that is currently being finished up! Last year was pretty rough, blew two stock turbos so I decided to build the car. Has been down since November, but I get it back next weekend!
    • svenskalice
      Kaizo Industries

      By svenskalice · Posted

      Hello, I believe my car was imported to America in the 2000s by Kaizo Industries. Would anyone be able to help me find more info on them? I've only found all the basic stuff like that paul walker bnr34, them being shutdown by feds, just stuff like that. Any help would be much appreciated, thanks!
    • believer
      HKS Vcam Step Pro Issues

      By believer · Posted

      I am using Motec M150.  I am not working on the car myself actually.  My workshop is giving all these info, they are quite reputable in the industry and are very familiar with Motec and RBs and have done a few big setups with VCam and single turbo on RBs.  In fact, they built and tuned my engine from day one.  But they are stumped with my engine at the moment and cannot work out how come the compression is so low with the VCam. They told me that they have now swapped in some Kelford cams (without the VCam) and can achieve around 130psi compression and the low end torque is better, but now the engine is doughy as.  It boosts and peaks at more than 1000rpm slower, with twin HKS GTIII RS, it doesn't get full boost until over 5000rpm. I have always thought the VCam was a bit disappointing at the low rpm. To a point I had to ride the clutch a fair bit to get up a small hill from stand still.  That was when I had a clutch.  Now changing to a 8HP, I don't have that luxury and this problem has become a major issue. I am beginning to think the VCam never work since the day it was installed.  Maybe it was just sitting at the most advanced point, that is why it went good at top end but very ordinary at the bottom.  Therefore, with the help of the Holinger 6 speed and paddle shift, as long as it was moving, it drove pretty good.
    • Dose Pipe Sutututu
      WTB R32 GTR Window glass stabilisers

      By Dose Pipe Sutututu · Posted

      yeah, there's a country that recently started importing Skylines, I blame them.
×
×
  • Create New...