Jump to content
SAU Community

Recommended Posts

FOR SALE

Standard 1996 Auto ECU from Series II R33 GTS-t

MEC-R370 B1 6Y28

with SAFC and other mods supported 203rwKW

Asking price $200 + shipping

A fairly used Apexi power intake, a bit dirty and one of the screw threads is missing

Asking $40+shipping

Stock airbox includes snorkel

WILL NOT SEPERATE

$150 Firm

Stock Boost Solenoid

$100 Firm

Can post photos on request

Misc. Stock parts, make me an offer:

A pair of stock R33 rims, can come with either 205 Kumho Ecsta 711 30% thread left for $120 or 225 Toyo RA1 Semi slicks with 60-70% thread left for $250 (tyres cost $300 each brand new)

Stock Auto gearbox oil cooler with associated piping

Stock Suspension includes shocks and springs, minus tops

Stock Exhaust cam gear

Stock Intercooler includes piping

Stock exhaust includes Dump pipe, front pipe, cat, and cat-back with new muffler (same style as standard, replaced by insurance after some prick rear ended me)

RB25 Turbo from my Auto R33 Series II motor

It's done 65000km

Has only been boosted to a max of 11Psi twice with FMIC

run on standard boost for daily driving

Bought the car totally stock at 60000Km

The writing on the compressor cover is 45V3

Will come with actuator and elbow pipe

Turbo runs perfectly well no signs of oil leak or white smoke from exhaust

My workshop that installed the new turbo says there's no abnormal shaft play and theres nothing physically wrong with the turbo

Asking price is SOLD

A set of 6 Standard Sidefeed 370cc Injectors supported 295rwHP with plenty of room to go

Asking price is SOLD

Malpassi Adjustable Rising Rate Fuel Pressure Regulator

Just a note for everyone this is the 2:1 reg and not the 1:1 reg which is all silver

Been used in car for approximately 6 months since bought second hand,

happily supporting 200rwKw with no problems

Upgrading to larger injectors and will not be needing FPR anymore

Asking SOLD

A set of front and rear king springs for R33 GTS-t

Bought of a friend a year ago who has used them for a year still in good condition, upgrading shocks with RSR springs so wont need these anymore

Asking SOLD

RB25 Series II AFM

SOLD

post-7539-1123846131.jpg

post-7539-1123846532.jpg

post-7539-1123846888.jpg

post-7539-1123847130.jpg

Edited by lukits01

Just posted a few pics

all items located in perth

Turbo is allready packed in a box ready for shipping

thanks to a buyer who pulled out last minute

Can I ask what you are replacing the ECU with? Just asking cos I have an auto S2 and was looking around for different ECU replacements and couldn't find any except piggybacks like Emanage

Can I ask what you are replacing the ECU with? Just asking cos I have an auto S2 and was looking around for different ECU replacements and couldn't find any except piggybacks like Emanage

Wolf3D :headbang:

Works like a charm! PM me if you want more details, dont want to clutter the thread

Im not selling a SAFC that was sold sometime ago

was just saying the ECU with the help of a SAFC supported 203rwKw...

pm an offer if you're still interested

Do you have the stock intercooler pipe that comes between the intercooler and the elbow pipe of the turbo?

If so, can you check if it has the "nipple" for the hose for the actuator?

How much?

  • 1 month later...
  • 1 month later...
considered snorkle sold.. will you sell it seperatly from box??

Sorry buddy. I'm taking the whole package. First in first served. Better luck next time. :cheers:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Do you have an IAT sensor? It's worth checking it to see. You may be suprised how little gap you actually need to flood your engine with hot air. (I tape up my airbox for a reason) :p
    • @KinkstaahKrinkle paint the "silver" alloy, not the red filter frame Engine bay heat won't be a issue worth worrying about as the silver alloy blocks it off on 3 sides, as for the top, the bonnet seals most of it and the big OEM CAI intake snorkel is still fitted in its original position  I will head into Clark's Rubber when I have some time to grab some pinch weld to tidy up the alloy after I paint it As for performance, I honestly wasn't expecting any, the only reason I got it is because the intake noise sounds cool to my old ears when I'm feeding it the beans Sometimes it's the silly things you do in in life that gives the most fun, and I do love anything that makes cool car noises In other news: I survived 4 nights at sea with Jackie not throwing me over board, holidays are continuing now as we are currently chilling at the Beachcomber in Toukley, after taking the coast roads from Sydney in the MX5, top down all the way, Toukley is where I spent a good deal of my youth holidaying during the summer months, there's lots of reminiscing going on,  and lots of beaches and old houses to visit Next on the list is to head to Batemans Bay for a few days, but we will take the Commodore out to stretch its legs, then Commodore hasn't really moved for months
    • There’s probably people who’d like to do it and then when it comes to putting their hands in their pockets they’ll all disappear into the shadows 
    • interesting....sounds like the later trans has software differences (or AM vs JDM). If I wasn't going down the tuning route it would be worth looking into retrofitting a new computer to the old box.
    • That's how it seems to me to. For the people that want huge power RBs (which it has been shown to do), this is great news, but that is not the same as trying to bring an rb 30 years forward....its not clear that there is a market of people who would pay 10s of thousands to do that
×
×
  • Create New...