Jump to content
SAU Community

Recommended Posts

  • Replies 63
  • Created
  • Last Reply

Top Posters In This Topic

Cheers guys, I'm now definately going for the Focals.

Fhrx, you couldnt by any chance give me a price for a set of 165V2s and 165CAs?

..... at the mo I've got a seller for $500

That sounds pretty close. Is that for both together or each?

I paid $420 for a pair of 165v2s and trust me they are exellent, it depends on personal preference but the 165v2s actually sounde better than the more expensive focal splits.

That sounds pretty close. Is that for both together or each?  

I paid $420 for a pair of 165v2s and trust me they are exellent, it depends on personal preference but the 165v2s actually sounde better than the more expensive focal splits.

Sweet, can't wait for some decent sound again in my 32.

and yeah... its for both :D!!!!!!!!!

Sweet, can't wait for some decent sound again in my 32.

and yeah... its for both :D!!!!!!!!!

Should sounds very sweet with your set up, and it sounds like ou have the gift of the gab to get a deal like that :wassup:

mine has changed yet again.

Zapco plans are out, u-dimension is in. Hopefully get time to put damn pods in soon.

2 x u-Dimension Jr15.2x Amps (2x125W RMS @ 4Ohms) *bought today :P *

1 x Sound Stream XTA720.4 Amp (4x90W RMS @ 4Ohms bridged to 2x360W RMS @ 4Ohms)

Focal Utopia 165W3 running semi-active mid-bass @ 125W RMS and mid/tweet @ 125W RMS off Focal x-over

JL Audio W3V2 in 4Ohm DVC getting 720W RMS off the SS

OR

Run the Focals fully active 125/125/90 and get a 2Ohm DVC W3V2 with 360W RMS into it. Must do some testing.

Ok, got my new install done finally, here is what i'm currently running..

Nissan CW726 head unit

Speakers are all Alpine..

SPS-170A rears

SPS-171A splits

SWS-1242D 12" sub

MRP-M350 sub amp

MRP-F240 4 channel amp

Pervson4 $150 4 channel speaker/line conv

Even tho the head unit needed speaker to line conversions the sound is awesome, now to save up for a decent head unit!

Mike

Ok, got my new install done finally, here is what i'm currently running..

Nissan CW726 head unit

Speakers are all Alpine..

SPS-170A rears

SPS-171A splits

SWS-1242D 12" sub

MRP-M350 sub amp

MRP-F240 4 channel amp

Pervson4 $150 4 channel speaker/line conv

Even tho the head unit needed speaker to line conversions the sound is awesome, now to save up for a decent head unit!

Mike

Sounds pretty sweet as it is though. Im sure a new HU will finish it off nicely

yeah i'm rapt with it. dug out my ipod on the weekend, installed the car mount i bought for it and loaded it up with some beats... i'm happy :rofl:

mike

Yeah NOICE, i was thinking of getting an iPod but im looking at the Creative Zen's now instead.

Deck: Alpine CDA-9831

Amp: Alpine MRDM500 (561x1 rms)

Amp: Alpine MRVF340 (55x4 rms)

Sub: Rockford Fosgate HX2 2212

Spks: 6" Pioneer 140W (soon to be replaced with some 6" splits)

Spks: 6x9" Pioneer 220W (maybe replace with some other 6x9", these are really old)

Cable: Aerpro (I think thats what its called)

Batt: Optima 500CCA

in process of installation after ripping out of TX3

so far ive got...

headunit: Pioneer Deh-p9650mp

front: pioneer 6 1/2" 4ways ( installed with difficutly... cutting of stuff has to be undertaken )

rear: pioneer 6x9's

and i wanna sub in the boot mb running off a decent amp... dunno yet but, coz the setup as is atm is pretty good.

Yeah NOICE, i was thinking of getting an iPod but im looking at the Creative Zen's now instead.

yeah the Zen is nice, one good feature is the user replaceable battery, the Ipod has an internal battery that requires the unit to be pulled apart to be replaced, so it will cost $$$. But, the Ipod has one thing the Zen doesn't, head unit support. Alpine, Pioneer and some other head units have interfaces available that let you completely control the Ipod, and even show the track names and ID3 tags on the display, which to me is worth getting the 'pod.

mike

yeah the Zen is nice, one good feature is the user replaceable battery, the Ipod has an internal battery that requires the unit to be pulled apart to be replaced, so it will cost $$$. But, the Ipod has one thing the Zen doesn't, head unit support. Alpine, Pioneer and some other head units have interfaces available that let you completely control the Ipod, and even show the track names and ID3 tags on the display, which to me is worth getting the 'pod.

mike

Yeah it can be very preicey to get a battery changed but with the new gen 3 ipods there is no need to worry about that.

I dont need it for the car as have a mp3/WMA HU anyway so its not like i can't fit enought songs on 2 or 3 discs to last me a little while, but i hear where your coming from.

Headunit : Alpine Cd tuner 9807

Splits: 6.5" Alpine Type-Rs

Amps: JBL 2 channel GT0 400

JBL Mono GTO 601.1

Sub: 15" Fusion Power Plant

Battery: Dual Exide Blue top sealed battery set up

Some pics can be found on link below

http://www.skylinesaustralia.com/photopost...r=20564&cat=500

Headunit : Alpine Cd tuner 9807

Splits: 6.5" Alpine Type-Rs

Amps: JBL 2 channel GT0 400

          JBL Mono GTO 601.1

Sub: 15" Fusion Power Plant

Battery: Dual Exide Blue top sealed battery set up

Some pics can be found on link below

http://www.skylinesaustralia.com/photopost...r=20564&cat=500

Nice install you got there, very blingy thats for sure.

Ok so after reading the post that i started i realised that i haven't posted up what my system is :chairshot

R32 with the following:

Headunit; Pioneer DEH-P5750MP

Amps;

Jaycar 2X100W Driving Subwoofers

Pioneer 4X80W driving front stage

Speakers;

Pioneer TSC-1603C

(have focals on hold to replace the pioneers)

Subs;

2 X MTX THUNDER 10' subs in custom built tubes.

Battery:

Odessey 1000

hey guys,

ipod battery are easy to chance,

from gen 1 to gen 4,

u can buy the kits off ebay for about 30 bucks,

I have done it myself,

its a pice of p#%s

Rick do you know if there is a difference with the Ipods (between the US and OZ) with the inputs/outputs at all???

Ive done my system on thinking i need "big bass", which i now regret ...

anyway i got:

headunit: Sony (dunno the model number) the one with the black lcd face , and no buttons. Need a romote/joystick to operate it. (55x4)

Front: Clarion 2 ways 6"

Back: Clarion 2 way 6"

Amp: Alpine 750x1 monobloc amp

Subs: Rockford fosgate stage 3 punch subs x 2 12"

Ive ordered Sunvisor monitors and a dvd player which havnt arrived yet. Be installed in a fortnight or so.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yuck. But it's kinda the same principle, moving timing around to make car run bad but sound good.... I went for a more spirited tuning drive to iron out a few things. Car no longer stalls, and it loved to dip RPM low when you clutch in. After tuning this (and the 4-5 tables that HPTuners/LS1 OEM ECU wants for idle air correction) it's now behaving somewhat normal. All expected because there's a new TB, new Intake manifold and that new TB which is 102mm vs 78... has an entirely different IAC passage which is smaller because ????? Unfortunately at this point I went to make further fine tuning changes to avoid it flaring up, you know... _tuning_ the HPTuners dongle died. Well to be more accurate - The USB cable died in a fashion that anyone who has ever charged a phone will recognize. After the app demanding I resync it 50 or so times (which all 'succeeded' but all failed) the device does not want to sync and I've logged a ticket with support to see if it's fixable. US Support said it was a 'storage issue' but after removing the SD card inside it and formatting it/fixing it the issue does persist. Unfortunately usually the fix is "Turn in your old dongle and pay $700 for the upgraded one" it's cheaper because I get some free licence credits I unfortunately don't need. However I'm 10 minutes down the road from HP Tuners AUS/VCM so at least I won't need to post it, and logged a new ticket for support over here. Definitely drives different. My SOTP dyno believes it's probably making 310-320kw instead of the 280 before.  It scrambles for traction a little now whereas it previously different. It drives like a bigger cam car up top even though the cam is smaller, likely due to the cam not being advanced 6 degrees. The timing is deliberately low and the fuel is very rich so who knows if this will improve on the dyno. It may, imperceptably. Also funny is removing the pineapples definitely makes the car squat more and axle tramp less. So this behavior of having more top end, squatting more, and scrabbling for traction more makes me think = more power. But I could have just been sitting on the threshold of that kind of behavior before. Time will tell if my butt dyno is calibrated right. I need the exhaust leaks fixed before dyno tune for obvious AFR related reasons - I repositioned the pipes but I'm not confident it's fully sealed even if it is better. At least the car does drive around while I cannot tweak/tune it for now. And I have aircon again. medium success!
    • Don't use that manifold. Please don't use that manifold. Sunk cost fallacy is not worth the later pain. None of these will be relevant to the change that will come from the different turbo and manifold. As in, the effect of the exhaust will be nil, regardless of what else is changed. And all the cam and fuel system stuff is not changing either way, so has no effect. The turbo and manifold (and to a small extent the wastegate)....big change.
    • Just wanted to say thank you for your input   my man (lead mechanic by trade) and I have done a heap of work as you can imagine just to make the hot side work with the dump pipe, stupid massive intake on turbo, trying to get the waste gate on was not fun.  I’m kinda getting to the point where I don’t know if I try and make this work and not throw all this cash and time away or do I scrap the lot and start again? the Apexi I’ve got was tuned for a few slight differences:   Tomei pon cams (mine are stock neo) Turbo smart 38mm external waste gate (mines 45mm replumbed) with stainless screamer pipe  3inch turbo back exhaust with high flow cat Sard 800cc top feed injectors Sard adjustable fuel pressure reg    
    • Out here E90s are the cheapest way into a sporty-ish car because everyone knows just how expensive the repairs can get. 8-10k USD for an automatic 335i. 
×
×
  • Create New...