Jump to content
SAU Community

Craziest import muckup yet :D

Sarumatix
 Share

Recommended Posts

Sarumatix Veteran

Sarumatix

Posted
Posted

some of you may know I recently got my heavily modified R32 4 door :D. Well this is all the information I was given when I bought it:

http://www.prestigemotorsport.com.au/au/st...sp?StockID=2784

Car has come all the way here, gone through compliance and registration etc. I finally got it tuned and dynod last week (217.5 kw at the wheels). On the sheet it was recorded as a GTS4. I thought that was a bit odd and hastily checked the model number on the plate.. RNR32 :D. Some how I've managed to score a 4-door gts4 with an RB26dett, but i'm not complaining :D. I'm wondering if i'm going to need to changing anything because i assumed it was a gts-t all this time :).

Link to comment
https://www.sau.com.au/forums/topic/70754-craziest-import-muckup-yet-d/
Share on other sites
V8skylineMAN Grand Master

V8skylineMAN

Posted
Posted

it says in the condition report...just under the parts list...."front driveshaft assy just been replaced" that didnt make u think summin was up?

gts-t 's dont have front driveshafts......but hey

awesome luck you have...got a baby gtr.

Sarumatix Veteran

Sarumatix

Posted
  • Author
Posted

Yeah the car was reaally tidy actually, only a few tiny traces of rust on the underside where it has been jacked up and one panel not finished properly. It all worked out to be surprisingly close to the estimated cost, although people interested in doing it should definately be aware there are still a fair number of expenses which are expected (like rego and insurance). Definately suggest people budget a few extra thousand over the estimated cost if they want their car on the road within a week or two of it arriving. The car doesn't need anymore braces, it has one in the boot, one in the engine bay (obviously) and one on the underside, very rigid to drive. A couple of things made me start wondering if it really was a gts4 but obviously you'd expect to get a gts-t if you bought a gts-t. the first and most obvious was the AWD light and front torque meters on the dash. But then the car is pretty heavily modified so I assumed they just put a gtr dash in there for fun :cheers:. It seems obvious in hindsight, but i'm not a skyline expert (heck my car is the first skyline i've driven :)). 2 nights ago my mate (who owns a silvia) and I were discussing how different it felt when pushed, especially around corners and that prompted me to check the model number :). It was really the first opportunity to push the car a bit but yeah even I could tell something was very different :). And yeah anything listed on the mods I obviously knew about :), kicking myself about the front drive assembly note though hehe.

But yeah I consider myself realllly lucky with this car :), also came with a carbon fibre bonnet which wasn't listed. Some more pictures if you are interested:

http://www.users.on.net/~ajh/My%20Car/

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • sonicii
      Rv37 400r questions

      By sonicii · Posted

      No idea about the remote start part. If the V37 nav is anything like other Nissan JDM vehicles, you can't get the factory Japanese nav working in australia, a card from a different car almost certainly won't work, those cards are usually matched to the serial number of the DCU.  You could be possibly swap out the components from a AuDM Q50 to get it working, but if this is a new model (2021+) 400R, then you will lose the newer features like ACP/AA.  That said, if you have ACP/AA, just use google maps.. I assume a band expander would be required to get the local radio stations, but don't forget the Japanese FM band is narrower than ours, so you still might not be able to receive all Australian stations. I can't see any reason the tyre pressure sensors won't work here, there is the sensor unit inside the rim and the receiver nearby in the wheel well.  I have never had to change the batteries on my 2015 Q50, so I assume they last quite a while.  A straight battery change shouldn't need them to be re-registered as they are the same unit, that should only be required if you replace a sensor with a new one.   Word of warning, if you ever go into the 'secret' diagnostics mode on the main screen, DO NOT EVER do a 'reset' in this menu, it will erase all of your model specific data in the DCU and you will need a trip to a dealer to re-program it all, which would be particularly painful being an import.  This applies to the AuDM Q50 too.
    • sonicii
      HY51 Fuga Hybrid

      By sonicii · Posted

      There is a known issue with the mix door motor on the Q50 which causes these symptoms, not sure if it is common on the Y51 though.
    • Dose Pipe Sutututu
      UniClutch

      By Dose Pipe Sutututu · Posted

      That ring thing is interesting how it's holding everything together 
    • elir32
      Rv37 400r questions

      By elir32 · Posted

      Hey guys. I have a 400R on its way to Australia from Japan currently and have a few questions I’m hoping others may be able to help with.   Wondering if anyone here has had any luck getting the Sat nav unit to work in Australia!? Assuming the Stereo is as simple as a band expanded and tv won’t work?  Seeing as they’re based off a Q50 which is Aus delivered is there any way to link that system to the nav? Nav modules and head unit are different part numbers and appear slightly different at the rear with plug ins etc. can I put my xtrail sd card into the rv37 and will that convert the maps or update to Australian? Has anyone got any advice here?     also has anyone fitted the factory remote start and Security system once it’s landed in Australia? I put an enquirey to Nissan Japan in via a third party, and they suggested it needs a Nissan Japan dealers device to setup and couldn’t guarantee if one here could do it or not. They can supply and I can physically fit it but to setup I would need a dealers device. Any information here would be appreciated also. I’ve seen one here with it fitted already prior to leaving Japan at a dealer/inporter, so clearly passes compliance and works when fitted Japan and doesn’t need changing here.      also, does the tyre inflation sensors work here? Does anything change with them when the vehicle arrives? Where are they actually situated? I’ve read they have batteries and they need to changing at times and seems like resetting involves the nav system?    any help here would be appreciated and any other aust specific information to help would be great. Looking forward to see what the current generation skyline is like and eager to see how many of the gadgets can be utilised here.  Thanks in advance 
    • Butters
      UniClutch

      By Butters · Posted

      Do need to take it with a pinch of salt. One of the adapter failures, they clearly had setup issues with the flywheel.  One of the slipping ones I spoke to and it was pretty clear the throwout was riding, rather than fix, just swapped to a new clutch.    These clutches are being put in anything from 5k offroad 4x4 beaters, GR yaris, 500hp commodores to 1200hp barra monsters. Bound to be some issues in some of them when they are not a simple bolt in affair due to the changes in height.    There is a lot going on in this picture and unless I did the job myself no way to tell what really happened. 
×
×
  • Create New...