Jump to content
SAU Community

Importing from AUS

Alf
 Share

Recommended Posts

Alf Proficient

Alf

Posted
Posted

I have some questions about importing a skyline from AUS to the US.

You would think that the US would be snapping up skylines but from what I've heard on US Nissan forums this isnt the case. Apparently the regulations are so tight that only a dozen or so can only be registered in the US per year.

There is hardly any businesses that import lines :cheers:

Ok the questions, Would there be any custom issues when shipping a 33 GTS25T to California?

There is no problem with shipping arrangements to Main beach cali. But what am I to expect in when it enters the US?. :Bang:

I have heard many stories about imports being cut up becoz they are illegal even tho they are not registered. :bs!: I know North America has high standards when it comes to emissions and safety. I've read on US sites saying that RHD cars are not as safe as LDH cars, I think this is just biased BS!. :usuck:

Does anyone know how the US system works.? I've read up on the procedures of importing into the US but i can't work half of it out. They use abbreviations like RI, VSP,VCP,VAS,FMVSSn HS-7 and so on.

The reason I ask about these ridiculous regulations is I may be moving to CA, USA in the near future and the last thing I want to do is leave my line behind and may bring a few more over later on. :ufo:

Link to comment
https://www.sau.com.au/forums/topic/70778-importing-from-aus/
Share on other sites
mini2 Community Regular

mini2

Posted
Posted

Their rules is quite different to our SEVS yet it's based on the same principles - allow cars that weren't released for the market in order to be driven on the road.

In order to register the 'line, it must be imported by the company that does the legalization then handle the conversion. Pretty pricey stuff...

http://www.motorex.net/

zohnny Rookie

zohnny

Posted
Posted

I'm in the US and I can tell you that it is impossible to legalize vehicles from overseas. You have to go thru all the emission test and safety test (ex. crash test, etc) which doesn't make sense at all. I was once tried to import two stroke bike (it's illegal unless 50cc) and I found that it was impossible.

If it was easy to bring cars here, you would see skyline/JDM cars everywhere. All I seen around here is the engine swap from JDM engines or clips.

Why do you want to go through all the hassle? Reason I'm saying is car is really cheap compare to Australia. For example, you can get new 350Z base model for $27k USD or new M3 for around $47k USD.

Alf Proficient

Alf

Posted
  • Author
Posted
Their rules is quite different to our SEVS yet it's based on the same principles - allow cars that weren't released for the market in order to be driven on the road.

In order to register the 'line, it must be imported by the company that does the legalization then handle the conversion. Pretty pricey stuff...

http://www.motorex.net/

The info is much appreciated. :D

The US definitely are missing out on such an awesum car. This monopoly that Motorex has is definitely pricey as I'm discovering.:goddam:

Most of the imports they have brought in have taken more than a year to get on the road. Say If i was to remove the running gear from the car and ship them over seperately as parts, as far as I know this is legal to do in the US (shipping isnt a problem for me). Would this still have to be registered under the import laws.?

If they convert it to LHD I wouldn't do it sorry but that's just wrong.

Also in theory they're right - LHD is safer for the side of the road they're on.

From the skylines I've seen legaly imported to the US, they seem to keep them RHD. :werd:

zohnny Rookie

zohnny

Posted
Posted
Most of the imports they have brought in have taken more than a year to get on the road. Say If i was to remove the running gear from the car and ship them over seperately as parts, as far as I know this is legal to do in the US (shipping isnt a problem for me). Would this still have to be registered under the import laws.?

If you know "someone" in the DMV(Department of Motor Vehicles) you might be able to register it legally. Plus I assume you need to know someone who can pass you state inspect. But if you get an accident or get pulled over by cops and if they finds out, you are in big big trouble(law suit/prison term or heavy fine)

Alf Proficient

Alf

Posted
  • Author
Posted
Why do you want to go through all the hassle? Reason I'm saying is car is really cheap compare to Australia. For example, you can get new 350Z base model for $27k USD or new M3 for around $47k USD.

Why? It's coz i'm putting so much $ and work into the car, esp the running gear. I've driven a 350Z and it's nothing like a skyline, the sentimental value and fact that it's a skyline makes it hard to part with.

When it comes to cars I'm very fussy. If I was to buy a new car I would have to pull it apart and rebuild it to suit the way I like a car to be.

PS: The RB that's being built is almost done so what ever happens it's staying in my sight.

Alf Proficient

Alf

Posted
  • Author
Posted
If you know "someone" in the DMV(Department of Motor Vehicles) you might be able to register it legally. Plus I assume you need to know someone who can pass you state inspect. But if you get an accident or get pulled over by cops and if they finds out, you are in big big trouble(law suit/prison term or heavy fine)

Thanks for the warning, will need more research on the matter :D

zohnny Rookie

zohnny

Posted
Posted
Why? It's coz i'm putting so much $ and work into the car, esp the running gear. I've driven a 350Z and it's nothing like a skyline, the sentimental value and fact that it's a skyline makes it hard to part with.

When it comes to cars I'm very fussy. If I was to buy a new car I would have to pull it apart and rebuild it to suit the way I like a car to be.

PS: The RB that's being built is almost done so what ever happens it's staying in my sight.

I wasn't trying to compare a skyline with a 350Z. I meant most of car in the US is cheaper(except skyline) than Australia. I understand your point though.

If you are bring it for temporary, I think there is way. It was something like personal use that you will be exporting after certain period like one year.(I don't remember well)

I remember reading an article in the Road and Track Magagine that the author brought Honda Jazz to the US for the cross country trip.(It took really long time).

But if you are going to staying in the US permenantly, I don't think it is possible. You might have to buy over priced motorex skyline and start again.

mini2 Community Regular

mini2

Posted
Posted

RBmotoring is another authorized importer.

However there are loopholes with the Canadian laws that allowing R33 to be registered there but whether you are allowed to drive Canadian registered cars in the US of A is another matter altogether.

It's true though, why buy a Skyline when there's Porsche, M3 and other exciting machinery that's overpriced in Australia? I'd drive those if I gonna be in the US then hop back in a Skyline once you return. Make far better financial sense too.

Alf Proficient

Alf

Posted
  • Author
Posted
It's true though, why buy a Skyline when there's Porsche, M3 and other exciting machinery that's overpriced in Australia? I'd drive those if I gonna be in the US then hop back in a Skyline once you return. Make far better financial sense too.

That's a good point.

PS:It's a permanent move.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      R32 GTST - 600KW+ RB28/CD009 Build

      By Dose Pipe Sutututu · Posted

      Actually looks like a Nitrous setup now 😆
    • Dose Pipe Sutututu
      Dose's Sometimes DIY and Pay Someone Home & Boat Improvement Thread

      By Dose Pipe Sutututu · Posted

      @robbo_rb180 I already have a NEO head on the shitbox 😎 Just needs beehive springs so I can rev it past the 8600 rpm limiter, then again pointless too, turbo is out of puff lol. Wen da gods let me win lotto eh?
    • robbo_rb180
      Dose's Sometimes DIY and Pay Someone Home & Boat Improvement Thread

      By robbo_rb180 · Posted

      Everyone I know with a90 supra at time attack aren't having issues with 3-5 fast laps so far and one is decent powered one too. Saw a k24 swapped 86 with a 8hp70 and big slicks and aero which had no drama's at QR and Manton Park. I've stuck a 25 row cooler in my setup with 8hp45/50 in the hopes of keeping the oil cool as I plan on some racing next year that 20-30min sessions. I've also geared my car so won't be using 7th and 8th gear too. @Dose Pipe Sutututu just needs to get that samsonas in already and have that tassie guy fit a head and rev it too 11ty thousand rpm. 
    • MBS206
      Mistakes were made, my R34 Story

      By MBS206 · Posted

      My embedded systems thoughts have me sitting with GTS on this. Variation between same phone hardware, should be small. However, the internal "intensity" or "volume" amount that say Google passes to the app, will be quite different, as the underlying hardware will be passing different levels for the same volume to the Google OS. Until the app creator has had each individual phone, and set benchmarks and calibrations for each, the amount of error can be quite huge.   It can even be observed by using different phones, recording the same noise, and then playing it back, they end up soon ding different. A big reason for it, is even the different types of mics used in phones have different responses, and different frequency ranges. Then you need to get into the DSP, and the variations in those, their sample rates which then effect their frequency range, and then the quality of the DSP, and what type of hardware conversion they do to for the ADC within the DSP. Oh, and let's not forget at the low level phones are designed to cutout loud sounds. It's one of the reasons they suck in really loud environments (eg concerts). The louder you yell, the more you'll get cutout too Note DSP is Digital Signal Processor ADC is the analogue to data converter. I don't have any real data on what the variation would truly be, however, chat GPT says in general, their output is typically between +/-2dB to +/-5dB of what you're really measuring. So realistically, anything from 4 to 10dB variation is possible even with the same devices.
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      'sif the error will be that low!
×
×
  • Create New...