How to install a catch can on a RB20DET

[VLRB20DET]

I got myself a new oil catch can , its a sealed item with no breather and 2 hose connections at the bottom,

Do i plug off the PCV and just run the 2 hoses from both rocker covers to the catch can ?????

[inissane]

2 hose connections on the bottom? doesnt sound much good maybe you got him upside down??- but there are a few threads around with this info so shoulda searched but anyway

basically you want both rocker covers feeding the catch can (which is probably empty unless it cost sh#tloads - so as SK says - put stainless steel wool in a stocking inside the can so it will actually separate oil instead of just looking bling)

then have the can feed to the pcv and also to the pipe between the afm and turbo (stock place it goes) - the only diff now is the catch can is inbetween the two spots the two lines originally went, hence leaving the pcv

there are a few ways to do it depending on what u want, eg i have an oil breather and none going to intake - u really need to search and read up, gain an understanding then buy the parts for that design and then install

[VLRB20DET]

yeah I think doing what I did wasnt right, if anyone has some pics of how theirs are setup on either a RB20 or RB25 please post them up so I can get a better understanding of how to install mine