Jump to content
SAU Community

Recommended Posts

morning all,

my little bro has recently got his licence in a manual and when i was drivin with him the other day he informed me that i shouldnt be rolling or "coasting" as he said in neutral down hills. Apparently his driving instructor has told him that it isnt just bad when gettin tested but also it is just plain bad for the gearbox..... is this just something to make him not do it or can it actually do something to the gearbox.... i cant see how it could. ???????

.....Cheers.....

Link to comment
https://www.sau.com.au/forums/topic/70825-will-this-kill-gearbox/
Share on other sites

why do you roll in neutral down hills? only time i can think that you'd do that is to come to a stop, which some people say is bad, but brake pads are cheaper than a clutch :rofl:

It definatly won't harm your gearbox coasting - how can it? there is just no gear engaged.

It's a bad habit at best stupid thing at worst. This is because if you need to move you're not in gear, also if someone pulls out on you or something it's one more thing you have to think about.

I even think coasting to lights is a bad idea but I've done it when lazy but I would recommend learners/those unfamiliar with driving not to do it... as ferni said though those who know what they're doing and wish to be changing pads instead of clutches go for your life :rofl:

And no it won't hurt the gearbox as others have already said.

Actually, all good points above but when I was instructing new drivers in Cars, 4WD's and Trucks the primary issue is if the engine stalls.

First, the power steering will continue to run even if the engine is not fuelled or sparked. Ever try to turn the wheel in a modern car without power steer? It can literally drag you off the road.

Second, the brake booster is vacuum assisted so likewise your brakes will work much less powerfully, but will still be powerful if the throttle is closed and the engine turning.

Finally on a truck the engine brake can still operate even is something else has failed and clutching would cause stalling.

Bottom line, keep it in gear and the clutch out.

Yeah i agree with all thats said here, its not bad for the car...

Geoff: how does putting it in neutral cause the car to stall? I understand if it did stall that would be very dangerous - but i've never had a car stall in neutral as far as i can remember.

Andrew, it's a just in case issue, and Skylines can have that stalling saga.

I've had a few vehicles with stalling problems so I see the merit. 2 were trucks that weren't my regular drives and it scared the crap outta me.

coasting in netural isnt bad, and if you are too dumb/slow to put it back into gear and slow down when i car pulls out in front of you, you shouldnt be driving in the first place.....

steve

there are other things to consider than just cars like kids and pets runnin across the road and as fast as you think you can whack it in gear sometimes its not fast enough.

i was always taught to leave the car in gear simply for that reason.

why do you roll in neutral down hills? only time i can think that you'd do that is to come to a stop, which some people say is bad, but brake pads are cheaper than a clutch :P

It definatly won't harm your gearbox coasting - how can it? there is just no gear engaged.

that is basically what i was talking about. coming to a stop at lights and intersections. Where im from, there are a few hills leading to intersections and i usually throw it into neutral. i knew it was bad for autos...thats why i was wondering. But point taken about the safety issues. cheers.

If you're out in the sticks and you're going down a huge hill then there's no reason to keep the car in gear. I coast in neutral all the time as what's the point of accelerating down a hill when you're braking at the same time? You're speeding and slowing the car at the same time and I see that as inefficient.

But tha's jus me :P

Rolling down a hill in neutral will actually increase your fuel bill.

The skylines and all new cars have a fuel cut when you are off the throttle and decelerating. This saves fuel.

Idling down a hill will only use more fuel.

Try this for an experimentation.

Use your gears to slow you down always, only use your brakes when your doing around 20km/h.

This means you will have to read traffic and drive a little cruiser than normal.

Watch how many kays you get out of a tank, I think it will suprise you.

I think this is one reason why some only get under 400km's to a tank where others get mid to high 400's.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Realized I haven't been back here in a while. Still here, still alive, still waiting for the car.  I went back again the only time last year from Oct-Nov for R's Meeting and drove it around some more, including a few laps on Fuji Speedway(in the wet, sadly). The car still feels good, but have a couple small things to address. I've been getting more parts but have slowed down still, and most of the bigger purchases are now out of the way. I find myself getting impatient more and more when it comes to getting started on this project; it's quite hard for me not being able to really dive in and start making this car my own because it's halfway across the world. At times it doesn't even really feel like I own one of these. Haven't really been motivated or had the desire to document the last trip on here or social media for, well, reasons... but here's some pics...it's also still alive and well as you can see: I've narrowed down to the last large part purchases(anything over $2k) before the engine build to be: 1) Ohlins Road & Tracks 2) ATS Twin Carbon clutch 3) Endless BBK with some custom options and 4) Kansai Service carbon driveshaft I don't think the budget exists for all of these this year, but I'll try for one or two items I think. Though, every time I look at my spreadsheet I sigh, shake my head, and get depressed just that little bit more.  'til later.
    • It's a stunning location!  I've been to NZ twice but haven't made it to the North Island yet.  Definitely on the cards but the South Island is hard to tear yourself away from too... Looking forward to see what you can wring out of it once you can get it to hold together!  Be awesome to get a low 11 or even sneaking into the high 10's pass out of it.  That's a bloody quick car that most people will never experience in their life.  Enjoy!
    • Nominally yes but I’m not really at that stage yet. Outsourcing to Japan is also a relatively good deal at the moment because their currency has devalued much more against the USD.  You would assume this but a lot has changed from the pandemic. Mechanics are in short supply and demand for fixing old cars has gone up from the cost of new cars. 250-300 USD/hr is not an unusual shop labor rate in California and you’re paying that regardless of whether the guy is competent or not. Coworkers have been quoted 3000 USD for a water pump and thermostat at a dealer on an N54. Oil changes went from ~75 USD to 150 on fairly normal cars like Civics. The cost of the oil and filter hasn’t even kept up with inflation.
    • The downside to that is that the cost of everything, particularly labour, is significantly higher here than it is over there in the Disunited States of Slavery. You can hire 3 tradesmen over there for just the Ranger Raptor allowance of a single 3rd year apprentice over here.
    • Shit. Starting to look like a car again.
×
×
  • Create New...