Jump to content
SAU Community

Recommended Posts

hi reflex,

i have recently done this, heres what i found. initial powerfc tune $350. then it may need readjustment from knocking or leaning out/running rich etc, should be free as its a retune or fix of previous tune. injectors to fit is about $250 as plenum has to come off. unsure about hiflow fitting. speak to ice performance for pricing gerald or nigel. www.iceperformance.com.au there in chentleham.

my first tune was at protek, they magically decided to run 0.90 bar and maxed out the fuel pump and then dropped the tune cos the fuel pump couldnt keep up, stocker unit. i never asked for boost to be turned up. the tune was left like that i had massive knock and it was running rich. was fixed by ice performance the 2nd time. id say ice performance

I think i will try to bolt the high flow on myself. Will it run on the standard ecu if I keep it on low boost (7psi) til I get the injectors and pfc fitted and tuned.

Creatd are more local to me but i dont mind driving. Has anyone had there car tuned by them?

So having injectors fitted and the Apexi PFC tuned im looking at about $600-650???

  • 3 weeks later...

I have put off going the high-flow turbo for a while. Creatd seem to be the closest tuner for me. For a full tune $350 seems pretty resonable. My cars pretty stock, can i assume i will have 185-195rwkw after pfc tune with the following mods:

-stock turbo

-cai + pod filter

-3" exhaust from the turbo back

-upgraded fuel pump(not sure what one) & surge tank

-FMIC

-iridium plugs

-boost set at 12psi

Take it ICE i rang around for months before my good gear went into my car looking for a tune, nigel and gerald were most helpful and were straight up with me about what to expect power and cost wise. there also perfectionists is the job isnt right they just keep ticking away until its 100%.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm selling my personal race car. 1992 BNR32 Skyline GT-R About eight years ago the engine developed the dreaded low oil pressure problem. I removed it and found the issue. However shortly after I moved half way across the country, moved my work shop, bought a house, got married, then moved my shop again to it's permanent location for the time being. in turn I do not have the time to race this car as it should be. In turn the engine I built for this car will end up in my street car and this car I hope finds a home with someone who can use it to it's full potential. The roll bar was built by Jason Noren Fabricaiton in Pomona California to SCCA and NASA Specs. The car used to compete in redline time attack and global time attack enthusiast class. It also has a fire suppression system.  The car is with me at my workshop in Kyle Texas, USA. Shipping it is no problem, I can personally deliver the car to the port of either Houston or Los Angeles. Any other port depending on where it is may require transport but we can always work that out.   The chassis itself is rust free, rear quarters and under fenders are free of any rust so it's a very solid foundation for anyone who wishes to move forward with it. As posted and at the asking price of $20,000 USD the car includes all of the following;   All OEM Body panels, front fenders, rear bumpers etc.  OEM Nissan Projector headlamps (Pictured N1 lamps were removed) OEM Nismo Side Skirts / Extensions OEM Rear Spats  Front & Rear Subframes are installed car is full roller Rear Subframe has Cusco Camber Arms, Whiteline HICAS Elimination Front Subframe has Whiteline tension rods and whiteline Sway bars w/ endlinks.  Buddy Club N1 Coilovers All chassis wiring and engine wiring is in tact. Attessa System is fully in tact and was functional before engine removal.  BCNR33 GT-R Brembo Brakes F+R with Endless MX72 Plus Pads, DBA Rotors & Stainless Steel Brake lines Billion Racing Radiator Billion Radiator Hoses Fluidyne Engine Oil Cooler Accusump System (trunk Mounted) 5 Speed Transmission w/ Transfer Case F+R Prop-shafts Rear Differential With rear Axles.  Nismo Gauge Cluster Nismo Clutch + Flywheel   Essentially what is needed to make this car running and driving again is as follows: A working Engine, an ECU, and time to put it together. The price posted is or best offer as I am willing to remove some components to accommodate price to a certain extent. If any serious buyer wants full detailed pictures, videos, or any questions I'll be happy to answer them. I believe this car is priced to move quickly considering it's a rust free and very straight chassis but always open to fair negotiation.  I can be contacted via phone or email. (+19517081648) email is juan@bardabe.com   
    • So...to my (and my mechanics doing the swap) surprise...the oil pan from NEO engine does not fit 100% and needs to by modified like this: It is not a huge problem but in the future i want a "proper" oil pan. So question is...what different oil pan can i get to fit without any problems and modification? Thanks! 
    • Some more info I found.  These are the last entries Yoshikiyo Fujii made on his blog before he passed away in 2009: http://blog.livedoor.jp/fujii_dynamics/ And finally this is where the workshop was situated:  https://maps.app.goo.gl/HhTPtHzt3WVcBTiEA  
    • shit boxes, kids, and daily drivers are all welcome
    • Cam seals go hard. It's a very old car.
×
×
  • Create New...