Jump to content
SAU Community

Recommended Posts

Guys, im sure all of you are well aware of the news in regards to all these skylines that have been getting stolen > Frankly its getting me a little paranoid even if i still do have full insurance....

I was reading in auto salon magazine a new security device called "Car smoke Security system" wanted to know what you think about this system and if anyone has it installed in there car, and is it a defect??????

I'm also looking to buy a clublock

looking for a good brand ????

Any feed back would be great!!

Link to comment
https://www.sau.com.au/forums/topic/70874-extra-security-for-skylines/
Share on other sites

  • Replies 54
  • Created
  • Last Reply

Top Posters In This Topic

Lol guys, I think he was hoping for a serious reply.

I have a 3 point immobiliser but I think one of them in addition to a club lock should be plenty unless you're leaving the car in a place where theives would have the time to remove/replace a stearing wheel or tow it away.

I refuse to leave my car in vulnerable places.

Those new snap off steering wheel kits, any one know much about them???

It is, silly as it sounds a boss kit that you can snap off and take the wheel with you, thus making the car hard to steer for would be joyriders.

I saw them in speed last month I think.

one good thing rearly mentioned is a main power key. it goes inline to your starter from your battery (it is the same big red plastic key that you see on the race cars). you can fit this underbonnet and take it with you. Another thing I haven't seen in years is an actual fuel line lock - same idea as the red power key, but goes into the fuel line.

basically use as meany methods as you can :P

Coming from SA I can tell you that no matter what you put in your car they can steal it if they really want it. It's only going to deter them but if they want it it's gone.

Get a 9mm para, trunk monkey and a **** off big dog. That should help.

But seriously I know of guys that can steal cars with tracking units and still get away with them. If you drive it to an airport apparently all the radars around there block out the tracker. i know of other ways but I'm not gonna give anyone ideas.

In SA they test out all of this latest and greatest equipment and 99.9% of it will be stolen.

  tikki169 said:
If you drive it to an airport apparently all the radars around there block out the tracker.

Thats BS at least for most tracking systems if not all.

  tikki169 said:
But seriously I know of guys that can steal cars with tracking units and still get away with them.  

so if you know them why dont you turn them in?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Had another look at the car and I noticed the fuel pump isn't priming on ignition. I'd taken out the pump from the boot to siphon out the old fuel, so maybe I've knocked something loose or broken a wire putting things back together. Will go back with a multimeter and try to work out what's stuffed. Kinda hoping it's the pump itself thats gone so I can upgrade it
    • Yeah agreed, you can't assume that shop are they only people who ever had to work on it. It was just a guess on the mods based on how things were done back then. You can check the Air Flow Meters by the part number on their tags, they are likely either Z32 or Nismo ones (both read about the same but the Z32 one is a little larger while nismo is stock size but supports the higher airflow like a Z32). And yes, all that would get you to 450hp / 340kw To tell what is happening with the turbos, you want a photo of the tag on the core, that will say what it was made out of  (they can retain the front and rear covers to make the plumbing easier)  
    • I'm selling my personal race car. 1992 BNR32 Skyline GT-R About eight years ago the engine developed the dreaded low oil pressure problem. I removed it and found the issue. However shortly after I moved half way across the country, moved my work shop, bought a house, got married, then moved my shop again to it's permanent location for the time being. in turn I do not have the time to race this car as it should be. In turn the engine I built for this car will end up in my street car and this car I hope finds a home with someone who can use it to it's full potential. The roll bar was built by Jason Noren Fabricaiton in Pomona California to SCCA and NASA Specs. The car used to compete in redline time attack and global time attack enthusiast class. It also has a fire suppression system.  The car is with me at my workshop in Kyle Texas, USA. Shipping it is no problem, I can personally deliver the car to the port of either Houston or Los Angeles. Any other port depending on where it is may require transport but we can always work that out.   The chassis itself is rust free, rear quarters and under fenders are free of any rust so it's a very solid foundation for anyone who wishes to move forward with it. As posted and at the asking price of $20,000 USD the car includes all of the following;   All OEM Body panels, front fenders, rear bumpers etc.  OEM Nissan Projector headlamps (Pictured N1 lamps were removed) OEM Nismo Side Skirts / Extensions OEM Rear Spats  Front & Rear Subframes are installed car is full roller Rear Subframe has Cusco Camber Arms, Whiteline HICAS Elimination Front Subframe has Whiteline tension rods and whiteline Sway bars w/ endlinks.  Buddy Club N1 Coilovers All chassis wiring and engine wiring is in tact. Attessa System is fully in tact and was functional before engine removal.  BCNR33 GT-R Brembo Brakes F+R with Endless MX72 Plus Pads, DBA Rotors & Stainless Steel Brake lines Billion Racing Radiator Billion Radiator Hoses Fluidyne Engine Oil Cooler Accusump System (trunk Mounted) 5 Speed Transmission w/ Transfer Case F+R Prop-shafts Rear Differential With rear Axles.  Nismo Gauge Cluster Nismo Clutch + Flywheel   Essentially what is needed to make this car running and driving again is as follows: A working Engine, an ECU, and time to put it together. The price posted is or best offer as I am willing to remove some components to accommodate price to a certain extent. If any serious buyer wants full detailed pictures, videos, or any questions I'll be happy to answer them. I believe this car is priced to move quickly considering it's a rust free and very straight chassis but always open to fair negotiation.  I can be contacted via phone or email. (+19517081648) email is juan@bardabe.com   
    • So...to my (and my mechanics doing the swap) surprise...the oil pan from NEO engine does not fit 100% and needs to by modified like this: It is not a huge problem but in the future i want a "proper" oil pan. So question is...what different oil pan can i get to fit without any problems and modification? Thanks! 
    • Some more info I found.  These are the last entries Yoshikiyo Fujii made on his blog before he passed away in 2009: http://blog.livedoor.jp/fujii_dynamics/ And finally this is where the workshop was situated:  https://maps.app.goo.gl/HhTPtHzt3WVcBTiEA  
×
×
  • Create New...