Jump to content
SAU Community

Petrol Prices - don't know if you take this seriously


Recommended Posts

got this in an email

>Petrol prices - worth thinking about!

>I called the number on the bottom of the email, and it is for real.

This

>initiative does come from Barry Minster, worth calling and chatting to

him

>if you need reassurance.

>Apparently we are going to hit close to $1.35 a litre by the winter.

If

>this happens the prices will flow on down to the price of every thing

we

>buy! Want petrol prices to come down? We need to take some

intelligent,

>united action. Philip Hollsworth, offered this good idea.

>This makes MUCH MORE SENSE than the "don't buy petrol on a certain

"day"

>campaign that was going around last April or May! The oil companies

just

>laughed at that because they knew we wouldn't continue to "hurt

ourselves"

>by refusing to buy petrol. It was more of an inconvenience to us than

it

>was a problem for them. BUT, whoever thought of this idea, has come up

with

>a plan that can really work.

>Now that the oil companies and the OPEC nations have conditioned us to

>think that the cost of a litre is CHEAP at .89 / .95 cents, we need to

take

>aggressive action to teach them that BUYERS control the marketplace

not

>sellers. With the price of petrol going up more each day, we consumers

need

>to take action. The only way we are going to see the price of petrol

come

>down is if we hit someone in the pocket by not purchasing their

Petrol!

>And we can do that WITHOUT hurting ourselves.

>Here's the idea:

>For the rest of this year, DON'T purchase ANY petrol from the two

biggest

>oil companies (which now are: BP and Mobil). If they are not selling

any

>petrol, they will be inclined to reduce their prices. If they reduce

their

>prices, the other companies will have to follow suit. But to have an

>impact, we need to reach literally millions of BP petrol buyers. It's

>really simple to do!!

>Now, don't wimp out on me at this point...keep reading and I'll

explain how

>simple it is to reach millions of people!! I am sending this note to a

lot

>of people. If each of you send it to at least ten more (30 x 10 = 300)

>...and those 300 send it to at least ten more (300 x 10 = 3,000)...

and so

>on, by the time the message reaches the sixth generation of people, we

will

>have reached over THREE MILLION consumers!

>Again, all you have to do is send this to 10 people. That's all. (and

not

>buy at BP and Mobil) How long would all that take? If each of us sends

this

>email out to ten more people within one day of receipt, all 3 MILLION

>people could conceivably be contacted within the next 8 days!!! I'll

bet

>you didn't think you and I had that much potential, did you! Acting

>together we can make a difference. If this makes sense to you, please

pass

>this message on.

>PLEASE HOLD OUT UNTIL THEY LOWER THEIR PRICES TO THE 80 cents a LITRE

>RANGE.

>It's easy to make this happen. Just forward this email, and buy your

petrol

>at Shell, Caltex, GAS. or Gull Outlets and drive past BP and MOBIL

>Stations.

>Barry Minster

>State President

>Ex Service, Service & Veterans Party

>www.esvp.asn.au

>13 Ermington Place

>Kew 3101

>Telephone: 03 9816 9713

i thought this bit summed it up and thats why it wasn't taken seriously

The oil companies just laughed at that because they knew we wouldn't continue to "hurt

ourselves" by refusing to buy petrol. It was more of an inconvenience to us than

it was a problem for them.

This email came out when petrol prices jumped from 70c/L to 90c/L year ago... it didn't work then and I don't see it working now.

Most of the price is GST and state taxes anyhow. Hound the government to lower those and you'll get lower prices at the pump.

This email came out when petrol prices jumped from 70c/L to 90c/L year ago... it didn't work then and I don't see it working now.

Most of the price is GST and state taxes anyhow. Hound the government to lower those and you'll get lower prices at the pump.

But the major price increases are due to the cost of crude oil and this is passes on toi consumers via petrol companies. The funny thing is that the OPEC countries are supposed to regulate the production output of oil, and hence, control the prices of such essential materials as fuel. I wonder why? Must have something to do with a couple of wars in the middle east. :) GST and govt taxes make up 52% of the cost of petrol in Australia. I highly doubt that the govt is going to reduce its revenue from petrol.

Why do OPEC restrict supply? to drive up the cost of oil and increase their profit. They do this because they can.

Basic economics, supply and demand v's maximum return. If you can sell something for 1 dollar more, and the resultant loss in sales means you are still making more money than for selling cheaper - you do it. Every large business does it, from supermarkets, to clothes manufacturers to motor cars to Banks.

And petrol, whilst you pay more now in actual dollar figures, during the first gulf conflict the price of petrol adjusted to current value of the dollar would be alot higher. But for how long is anybodies guess.

Interestingly I was reading an article by noam chomsky which described how the US in the late 40s and 50s began to convert western democracies and asian industrialised countries from coal based economies to oil based economies . Most of these nations were self sufficient in coal but had to rely on imported oil . By doing this and by controlling the supply of oil they basically had a strangle hold on those countries economies effectively taking them over . While the US is also dependant on imported oil it was considered that through massive military force they could control the world oil supplies and therefor direct supplies as required to meet their own demand .

and ofcoarse the rest is history

environmentally friendly aye?

Well you have obviously been hiding in a small box. Sure if we could get rid of the waste properly but we can't as of yet. Also cars would never run on uranium. Not in this lifetime atleast.

Also the country who sells it has to also get rid of the waste. Australia would be ****ed!

Well if you consider belching out millions of tonnes annually of pullution into the atmosphere 'environmentally friendly' what can I say???

One little ball refined uranium, that would fit in the palm of your hand will propel a 7000 ton submarine continuously for 15 years. How much fuel do you think a conventional submarine would use? Millions of tons of deisel.

Now, this contamination in the atmosphere isnt being cleaned up, all you have to do with uranium waste is dig a hole and bury it - we got pleny of room to dig a hole or two..... we could even just shove it down the holes made by the crude oil that is being sucked out of the earth.

Alot better than destroying the air that we breathe, and contaminating all life on this planet - no matter where they are, animal of vegetable?

When they finally do make a car that runs on nuclear power, (argueably solar powered cars already do this - the sun is just a huge nuclear reactor), the smallest amount (probably smaller than a pea) will power it for the life of the vehicle - so highly efficient its almost inconceivable. The turbo will be redundant :P

The logistics of it just dont balance up - IMHO, greenies have been scaring the shit out of people with alot of mis-informed propaganda.

Small amount of waste that can be disposed of without harm to the environment v's millions of tonnes of waste constantly destroying the planet at an ever increasing rate?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • The cross sectional area of a circular hole scales with the square of diameter. So a 2mm diameter hole is 4x the area of a 1mm hole. Not double. The 1.7mm hole is nearly 3x the area of a 1mm hole. You do not need restrictors at both ends of the oil supply line. If you have new, additional restrictors at the turbo end, that you did not have before, then you do not need a restrictor at the inlet end.
    • Hi all. Been a while but things are moving along. I just have something that I am wondering about. Since I will use OEM turbo oil pumbing, I got myself a new bolt, the one that goes into the engine block oil feed. As I recall (and see visually) this bolt comes restricted with I think a 1.7mm hole? Not quite sure but it was something around that size. The turbos have 1mm restrictor bolts installed, as necessary due to ball bearings and my higher oil pressures. Can I now just use that OEM bolt with the 1.7mm hole in for the engine block or will this actually be too much oil flow restriction and I have to drill it out first? In my head it would make sense for the bolt to be at least 2mm wide as both turbos take "1mm of oil flow". Do let me know if my logic is flawed here, I just want to make sure I don't kill my turbo bearings with too little oil. Don't know if I can trust the saying I read somewhere that ball bearing turbos essentially only need an oil mist
    • There are several aftermarket options available, from not-too-painful moneyhttps://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35 and  https://justjap.com/products/crank-motorsport-billet-rear-axles-fits-nissan-skyline-r33-gts-t-r34-gt-t?srsltid=AfmBOorQk4xkGUa98kO7v2ePLUiNt-HRrM2AwWNw9mbSIVE1ujBVwY__, all the way up to The Driveshaft Shop https://driveshaftshop.com/skyline-cv-axles/
    • Yeah based on old XRC5964S specs, it looks to be roughly GTX3576R sized? But this 5964S compressor will flow 90lb airflow somewhat similar to the compressors in both the GTX3584RS or G35-1050.. I fully expected the 0.64 rear A/R to choke up top - seems way too small from typical convention - but these are seemingly beneficial over the prior 0.82 results.. Be interesting to see if he comments on the EFR question in that thread - he mentioned in a prior video that BW EFR's were the "cats pajamas 10 years ago", but by the sounds of things all his kits have been using Xona for quite a while now.
    • Yeah it’s still got the oem manual gearbox and clutch, only kinda mods are a blow off valve, coil overs, and a aftermarket intercooler. Also had it for about 2 months now with a lovely midnight purple paint on it.
×
×
  • Create New...