Jump to content
SAU Community

GTR BOV's

Mush

By Mush,
in Engines & Forced Induction

 Share

Recommended Posts

Mush Contributor

Mush

Posted
Posted

hey there i want to change my BOV's on my 32GTR and im a big fan of the HKSSQ, i was just wondering how id go about it as in do i still need 2 BOV's or can i get just the 1 fitted and the old 1's removed.

also if u guys hav any other suggestions on good bov's im all ears.. and im a big fan of the flutter sound, which if im correct the HKS BOV's give until ur under full boost which then just lets out BOV sound ?

cheers Paul

Link to comment
https://www.sau.com.au/forums/topic/71548-gtr-bovs/
Share on other sites
Beer Baron Grand Master

Beer Baron

Posted
Posted

if you really want the ssqv then my advice is to fit the proper HKS kit which comes with two valves that will fit in the stock location.

brotec also make a programable valve which has been used with varying degrees of sucess. when set-up properly I would say they eclipse any other bov on the market. they can be tuned to make a flutter sound or the whup-whup-cha-choof noise (which I prefer). the choice is yours, they are a very flexible bov.

Link to comment
https://www.sau.com.au/forums/topic/71548-gtr-bovs/#findComment-1319119
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Toni
      R32 GTR - Where to begin

      By Toni · Posted

      Thanks Murray, appreciate the advice, a few things to think about now 😀 
    • Murray_Calavera
      R32 GTR - Where to begin

      By Murray_Calavera · Posted

      After my million questions, I'll throw in my 2c now.  If I was in your shoes, I would buy the best/most modern ECU available. A Nexus S3 would fit the bill. It is highly likely that this ECU will last the life of the car, regardless of whatever ECU manufacturers develop in the future. Modern ECU's are amazing and will still be amazing in 10 or 20 years time. If you can get e85 relatively close to where you live, I would buy a flex sensor and size the injectors to run e85. I'd go a Walbro 525 fuel pump with relay wiring kit.  Turbo wise, I'd hit up HyperGear and get a pair of the biggest bolt on turbos.  Now for the safety side of things, I'd have the tuner setup the tune to be very soft/safe on 98. Then on the flex tune, a lot of the timing can be put back in on the top end (I'd run full boost on both tunes, but manipulate the power with the timing). This also has the benefit of hopefully delaying the, "bored now, need more boost" that comes with owning a modified turbo car. If you spend most of your time on the 98 tune, the few times your on e85 will hopefully stay special/fun.  The bad news. As your paying for labour and tuning, I don't think this will happen with $10,000. This might be the motivation to learn to do it yourself though, that way instead you'll have the built car and change from the $10,000
    • Toni
      R32 GTR - Where to begin

      By Toni · Posted

      Cheers Duncan, on club reg and very much a weekender, don't drive it all that hard and don't intend to go overboard at any point in the future too. In my 40's and quite mature driver, just want that little bit more from it 😉 Sounds like, after ensuring everything is in good condition, ECU, Injectors, Fuel Pump and a set of turbos is likely to be my path forward. 
    • GTSBoy
      R32 Gtst - Sunroof Assembly And Roof Bits

      By GTSBoy · Posted

      15 years is not too long to hold onto something like that, right?
    • Satwinder
      R32 Gtst - Sunroof Assembly And Roof Bits

      By Satwinder · Posted

      Hey man,   By any chance you still have sunroof for sale ?   Thanks
×
×
  • Create New...