Jump to content
SAU Community

Recommended Posts

Hi Guys,

It has been some time since I have been on the forums.

Some of you may remember that I was doing a rb25det conversion in my r32 gts-t.

It is now all complete.

Due to alot of delays such as waiting 2 weeks for a gtr speedo drive and waiting 3 weeks for an auto elec to do my wiring loom, I can now say I am not sorry as it was all worth it.

I used a s2 rb25 from a late 96 r33, along with the gearbox and wiring loom.

I added a 3" front pipe onto my apexi exhaust system, power fc and blitz spec r boost controller.

On dyno dynamics dyno it made 197.6kw's at the rears on 11.5psi.

The overall drivability of the car is sooo much better. It makes you feel that the rb25 should have come in the 32 from factory.

Take it Easy

Mark :cheers:

Link to comment
https://www.sau.com.au/forums/topic/71647-rb25-conversion-complete/
Share on other sites

...The overall drivability of the car is sooo much better. It makes you feel that the rb25 should have come in the 32 from factory.  

 

LOL..careful:)

Nah excellent to hear you are back on the road, and happy with the results. Do you mind me asking what it ended up setting you back, basically what you were expecting or more?...as im curious to know the real cost of such a swap, as i recall thinking based on my numbers it would cost more then you were thinking... Just curious to know if my numvbers were wrong/ im talking to the wrong ppl?

Now throw a 2530 on it and drive the wheels off it:)

Hi Roy,

No probs mate.

I purchased the motor, gearbox, loom and factory ecu for $2,500.

It should have been $3,500 although they took $1,000 off for the rb20.

For labour it ended up being just over $2,000 then plus $400 for tuning and $500 for the wiring loom.

I'd luv to get a 2530, 2535 or even a hi-flow although my wallet isnt very happy with me at the moment so it will have to come in the distant future :cheers:

take care

Mark

LOL..careful:)

Nah excellent to hear you are back on the road, and happy with the results. Do you mind me asking what it ended up setting you back, basically what you were expecting or more?...as im curious to know the real cost of such a swap, as i recall thinking based on my numbers it would cost more then you were thinking... Just curious to know if my numvbers were wrong/ im talking to the wrong ppl?

Now throw a 2530 on it and drive the wheels off it:)

great stuff mark :D I think you got a very good price for it all in the end, considering you have got an RB25 gearbox behind it, and somebody else did the labour also.

Better you have a smile on your face everytime you get in now.. that power level is impressive too.

I'm just sorting out some of the basics with mine and having some fun with the ol' rb20, but probably will be closer to end of this year/start of next before I get my motor in there. I'm interested to see how skylinegeoff's old "2530 equivelent" goes on my 2L first, then the 25

Hi Sydney Kid,

Yes I think the suspension may need a bit of attention.

At the moment I have Tein HA Coil Overs, although I think it would be nice to get those whiteline sway bars and front adjustable castor rods.

I did have a strut brace although I have to find a way to get it to fit now :)

The Teins are quite good though, as there is minimum body roll when cornering.

Take Care

Mark

Hi Sydney Kid,

Yes I think the suspension may need a bit of attention.

At the moment I have Tein HA Coil Overs, although I think it would be nice to get those whiteline sway bars and front adjustable castor rods.

I did have a strut brace although I have to find a way to get it to fit now :P

The Teins are quite good though, as there is minimum body roll when cornering.

Take Care

Mark

Tein HA's, are yes, that explains it. Rediculously high spring rates, particularly in the rear. Hence a lack of compliance and the tyres skip from ridge to ridge in the road surface and the result is poor traction. My low cost suggestion is (as always), put the rear springs in the front and spend $150 and buy a set of rear springs with more suitable spring rates.

Stabilser bars are for controlling roll, not springs. Springs are for holding the car up and providing compliance for bumps. Horses for courses as they say.

:)

Ohh sorry Roy if I offended you before about the rb20's :P

I don't hate rb20's.... I know they have feelings too.

That sounds cool Gordo :D Keep me posted on how your going...

Take it Easy

Mark

no they don't! :)

Mark - where'd you get the engine from? Cos that's a really decent price.

Hi Nathan,

I got my motor from Tyrone at De Silvia Parts in Clayton.

His No is 0417 338256.

If you talk to him tell him you know Mark with the white r32 and he'll look after you.

He's got quite a few rb25's :)

take care

Mark

:( unfortunately I'm in Sydney...but thanks for the contact Mark.

Quote: unfortunately I'm in Sydney...but thanks for the contact Mark /Quote

You can try powerplay imports, as a friend of mine did it thru them..

www.powerplayimports.com

Glad 2 hear another person has done this conversion with a huge smile on his face..

Good stuff Mark!!!

I knew I had you converted - I miss my old RB25 powered R32 - it felt so good in a light R32!!

I hope too many people dont do it, itll make it common - Back in Perth my car was the only 1 of 2 - RB25 powered 32s, and considering 32s were rare over there, it was even better. I only had to take someone once for a ride in that car to convince them, especially when they were hanging on for dear life when the car was wheelspinng 3rd sideways up the street :) Ahh the memories!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • In a few years from now, you'll regret that. It'll eat away at you, knowing the truth of the ugly hiding beneath the beautiful exterior... 😛
    • I don't think the G2 profile is particularly dangerous for the engine per se, more just are you actually ok with the turbo lag trade-offs? If the answer is yes then go for it. I personally don't think I'd be ok with it because I spend so much time at lower RPMs and I really enjoy the feeling of being able to stay in 5th gear on the highway and just roll into the throttle to get boost. Or staying in 3rd gear on "gentle canyon cruises" without feeling the turbo lag too badly. The 525 pump should be able to run flat out on factory lines but I would bet the pressure drop from pump to regulator is quite impressive. I don't know how much it would be exactly but I've seen figures like 30 psi thrown around.
    • It's interesting seeing everyone talk about what level of risk they are happy to tolerate.  Building a GTR always has a level of risk, you could be that lucky guy that drops 20k on the engine build alone and still has the thing go pop on the dyno. Life is fun like that.  The way I see it, the thing is a toy to be enjoyed. I'd be happy to turn up the power on stock motor and limit the risk with sensible tuning and engine protection. If it still goes pop, it is what it is. The car isn't a daily driver so it can happily sit while a plan is made to sort it out.  Given this thing will be a street car only, I really feel it's worth the (relatively small if managed well) risk to turn the power up to around 350KW on e85.  I don't think anyone getting into the skyline game now is doing it out of logic. Surely it is a purely emotional decision so I'm not sure how important it is to think about the engine build logically. The heart wants what it wants.  @joshuaho96 little note for Josh, I run my 525 pump flat out all the time and through the factory lines without any issues. (excluding the melting connectors, that's sorted now. we'll pretend it never happened lol)
    • But the Nexus S3 is very expensive and won't be as purpose-built for the application as a separate electronic boost controller :^) More seriously my pet issue here would be that the Walbro 525 running at 100% duty cycle is going to require more FPR than the stock setup can handle. I'm also pretty sure from what I've seen elsewhere you might want to slow down the pump regardless unless you're going to come up with some way of upsizing the fuel lines coming from the fuel tank. Factory 8mm fuel line doesn't actually flow very much if you want to keep pressure drop down between the fuel pump outlet and FPR. If you really want to "keep it simple" I would run only as much pump as you need and source a fuel pump controller to slow down the pump in the vain hope of being able to run stock-style FPRs which are pretty dinky. Or just use the HICAS lines and it should be mostly fine. OP should also really think hard about what profile they'd want out of the turbo. My pet choice here would be the G1 profile rather than anything higher power but YMMV. I already think ~stock turbo lag is pretty bad so I don't want to make it worse. In "gentle canyon cruising" I found that I spent a lot of time around 4-4.5k RPM. I also recommend DIYing labor if you're detail-oriented enough. Costs are high for labor + if you do it yourself you can be your own quality control.
    • GTSBoy is again on the money. My actual advice? Sell the car. (really). For what it's worth as is, you can sidegrade into something much better. If you care about function then this is the actual move. If you want a Skyline to perform, set aside about $100K to do it. This is NOT a typo. You will see right away these are two very different mindsets. Realistically we're talking full restomod for any Skyline still kicking around. Have an honest think about which one you are.. and what you want to do, and how much you want to invest in this (with no return).
×
×
  • Create New...