Jump to content
SAU Community

N1 gasket kits?

[[d a n n y]]

By [[d a n n y]],
in New South Wales

 Share

Recommended Posts

Blitz Grand Master

Blitz

Posted
Posted
]']nah already have everything set out at the moment.

got a 33 GTR vpsec block

33GTR crank nitored  

ACL pistons

forged conrods

N1 turbos rebuilt

power FC

using my standard head (port and polished)

new clutch

and maybe new fuel pump.

that's what i have in mind at the moment.

and i have actaully squeezed it down to 10K

Maybe a fuel pump? and no mention of any other fuel system upgrades?

I'd love to know what workshop you are using

[[d a n n y]] Veteran

[[d a n n y]]

Posted
  • Author
Posted
if your goin with 34 n1s you need a metal head gasket aleast the stock one want be happy with much over 16-17psi i wouldnt think. then again with stock injectors u may only make 280kws if your lucky

my 2c

yeah that's on the next list once i get enfuff money..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      Ah yes but were you responsible? In the time I've had it (just before Christmas) I spun off the track twice and drove into things twice, so four separate incidents.. in two outings. Luckily I have a full OEM GTR front end to put on which is hopefully not a precursor for further, future, more expensive mistakes to come. It is some consolation that anyone who would want to buy my Altia bar would have to paint it anyway, the guards, too. (if they can get over the asymmetry). Hopefully over the weekend I will disassemble and see how badly things are bent. From what it looks like, the headlight has actually just been pushed back and bent the headlight support (which .. somehow... crushed the guard in). I guess the headlight plastic is strong stuff.
    • The Bogan
      Mistakes were made, my R34 Story

      By The Bogan · Posted

      These things happen And I believe "we, the people, who modify stuff, and actually use it, cannot have nice things" It's just a shame that it happened so soon after paint  I still win the award for quickly destroying newly painted panels I think, as my car came back from the paint shop all nice and shiny, until about 4 hours later when the boot was destroyed by a wayward locker that was blown around by the wind.... What doesn't kill you makes you stronger, and poorer.....dooh
    • GTSBoy
      R33 disk brake size

      By GTSBoy · Posted

      This. And also, the rotor thickness is constrained by the calipers. Cannot be much thicker, if at all. Cannot be much thinner, if at all. New rotors are....fairly cheap. Turbo calipers can still be picked up for sensible money. Arguably, the best thing is to get R32 calipers and put them on mount spacers on 324mm discs. That's about the cheapest and easiest way to get quite large brakes that are essentially bolt on. And that's despite maintaining for years that the R32 calipers are not the best choice because they seem to be more flexy and creaky than the others. If you were prepared to put up with nasty little NA sliding calipers, these will still seem like Brembos by comparison.
    • Yeetus
      R33 disk brake size

      By Yeetus · Posted

      A quick Google said 297mm..
    • blind_elk
      R33 disk brake size

      By blind_elk · Posted

      Why would you not fit the biggest possible brakes?
×
×
  • Create New...