Jump to content
SAU Community

Recommended Posts

Hi guys,

Just wondering what they actually check when you goto vicroads to register your car? Will they check things such as how loud ur exhaust is?

I am going to get my car registered again but i can't remember what they actually check at vicroads. A while back i know it was a fairly quick process.

Thanks

Link to comment
https://www.sau.com.au/forums/topic/71860-registering-a-vehicle-in-vic/
Share on other sites

yes it has. oh gosh, that easy!!!!! thanks heap!!! i didn't realise i didn't even need to bring the car, thats a huge relief.

sorry, one more question, if i were to sell the car to someone. would they then just bring the transfer papers with them and do the same thing? i was only going to register the car to sell it easier.

When the car is initally registered, they need to check engine/chassis numbers, to make sure that the details match what is on the roadworthy certificate, and what is on their database.

They can't do that without the car present. :D

You don't need to present the car for yearly registration renewal.

Yes, the roadworthy shows that the car complies with all safety regulations and is legal to be driven on the road.

VicRoads still need to check the engine number etc. if it's a new registration, or registration has previously been cancelled.

  • 4 months later...

Sorry to bump up an old thread.

WHen reg. a car for the first time, does the car need to be stock when u take it to vicroads to be registered?

As my stagea will prolly have its aftermarket exhaust & wheels on, will they tell me l need the standard items back on, or will l be fine with just the RWC & all the applicable import/compliance forms.

Edited by NRGIZD

yeah you should be fine.. unless they are tight they shouldn't actually test for roadworthiness as someone as said above.. Don't worry about bringing your car down to stock, just make sure you bring all your paperwork, and make sure it matches up. For example i got knocked back on registration the first time because on the RWC it didn't have RB20 written in front of the engine number, even thought it isn't actually part of the engine number.. So check that all the numbers in your documents match against each other.

The only thing that the people at vicroads checked when I had my car inspected was that the engine and chassis numbers from the car matched the numbers on the paperwork.

think your going under the sevs system so i dont know abt that, but when i got my 32gtst registered all i needed was my RWC certificate and other documents to pay stamp duty. like sky031 said, first time registration needs the car present. the dude i had at vic roads was a funny guy, he came out with one of them extendable lights on a pole thingi to check my engine number but the batteries died on him so he goes "ah fk that, just dont kill anyone on the road k" lolz

Thanks for clearing that guys. I was hoping l didn't have to try and find a set of 16" wheels to use for all of 30mins.

Car is getting complianced under RAWS i believe. Is off the dock tomorrow and off to be complianced .... not long to go now.

think your going under the sevs system so i dont know abt that, but when i got my 32gtst registered all i needed was my RWC certificate and other documents to pay stamp duty. like sky031 said, first time registration needs the car present. the dude i had at vic roads was a funny guy, he came out with one of them extendable lights on a pole thingi to check my engine number but the batteries died on him so he goes "ah fk that, just dont kill anyone on the road k" lolz

LOL good too see such thoroughness :huh:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Been over 2 months since I have done anything on the S15 and had a day off today so got stuck into mounting the radiator and intercooler. I ended up using factory bottom mounts as bolted in and I did order some gktech top brackets but didn't work with the PWR radiator so made up some with aluminium flat bar. Spent way to long on them but pretty happy how they are. Next job was the intercooler. Used some more aluminium flat bar and did the bottom mounts first. Top was easy as just one long piece and 2 90 degree coming off rad support and welded them on. The bumper support required some notching to let the outlets sit where I want so will add some reinforcement later to strengthen it. I have also bought ecu and waiting for it to arrive. Went with a Link g4x Xtreme but will be adding a ptmotorsport expander to add a few extra inputs over CAN. Went through a few different configurations on pclink to get what I want to allow future expansion for sensors and gearbox upgrades. Ordered gktech rear arms but looking at the hardrace lower control arms to have some extra adjustment too will see how the alignment looks after first setup. Got 2 more weeks of work before shut down and will have almost 4 weeks to work on this so planning on hopefully firing up mid January.   Also bought a 2015 brz with a heap of good gear, did noosa hill climb a month back. Owned it for 3 days changed alignment and sent it. Finished the weekend 2nd in class and only .3 off the 180sx best time last year. MCA Red coilovers, gktech rear lca, bolt on lock kit and tie rods, whiteline toe arms, cusco 1.5way diff and 4.5 ratio, endless brake pads, headers, exhaust, perrin intake and e85 tune. Electronic steering adjustment, nankang crs with koya wheels 17x9 +35. Have bought rear traction arm and relocation kit, extended studs and v3 tie rod kit. Planning on also getting flex tune as lucky to get 300km a tank with e85 and short ratio. Car is a heap of fun to drive and super easy to work on. AC in the line up at Noosa was mint in 35degree weather.
    • I'm 22 years younger than you mark, and I'm operating in the exact same way! Ha ha ha
    • All clamps are oem    one question is , what is the bit at the top on high pressure pipe where it connectes to intake manifold and other side goes toward the engine( see item in red circle in diabram attached)   ? Seen some people stating that should be removed on boosted application and skyline is boosted from manufacture so little puzzled. Mine is around 23pwi (700 hpish)   also some state it could be the bonjo bolt crash washer so bought two washers
    • what do you mean dead platform? People buy older, out dated and less power cars on "Dead platforms" for over $65k all the time.
    • That is really nice! Very nice finish when you have an oven to do the crinkling nice and evenly!
×
×
  • Create New...