Jump to content
SAU Community

Recommended Posts

Hey Guys,

Will be putting a new system in my R33 pretty soon and i'm not sure if my battery will be up to scratch. I'm still running the original Japanese battery, which appears it may be on its way out after spending months sitting doing nothing. It's ok and the car starts, but as I said, its the original... :uh-huh:

I'll be adding 2 amps to my system. a Clarion 400W and a Sony 222W.

I was wondering if anyone could offer advice on whether I should change my battery and if so, what type/brand of battery should I use to effectively run this system?

Link to comment
https://www.sau.com.au/forums/topic/7208-new-battery-to-run-2-amps/
Share on other sites

My stock battery seems to go fine running two amps, even when the volume is way up and I have headlights on.

If you have any doubts, install a capacitor (about $150-$300) for your amps.

But I reckon you'll be fine. I'd only change if you're not happy with the results...

Blitz33

-I think the oddyssey 1000 battery put out about 380 CCA.

They are a good battery just dont let them go flat, ie rarely run your system without the engine runing, as they die when they are drained of most of there power. They dont behave like a normal lead acid battery.

That oddyssey sounds like a monster battery, but also a monster price too...

I reckon any standard heavy duty battery of the right rating will do the trick... people run 2 amps + much more off the one battery with no probs.

Amps draw less and less power these days as well to output the same amount of wattage. More efficient components.

Guest mooks66

those amps wouldnt be pulling too much electrical draw from your system. you should be fine

just get a nice healthy 4guage power for red and black

and also upgrade your battery's ground to 4guage and also your alternator wiring to 4guage and the stocker batter will cope a heck of a lot better.

that done, your set to go

4guage into a distribution block and then 2x8 guage to the amps and your all done.

good luck

in any serious sretu i wouldnt go past and OPTIMA yellowtop deep cycle battery

950CCA 95A regular cycle and its a 95AH cell

where as the highest oddesey has to offer is a 65ah cell and the standard battery in skilines id a 45ah cell

if doing a big install the ah rating is more iportant than the CCA

and a high regular cycle can only help things along

dont forget a 100w RMS X2 amp will draw about 300W - 400W from your battery which works out to be about 30 A

im running 600w worth of amp and it draws almost 1000w from my electrical system

im using and optima yellow top and i get no dimming of the lights with all healights on

bottom line is the bigger the battery the better

Originally posted by MYGTST

in any serious sretu i wouldnt go past and OPTIMA yellowtop  deep cycle battery

950CCA  95A regular cycle and its a 95AH cell

where as the highest oddesey has to offer is a 65ah cell and the standard battery in skilines id a 45ah cell

if doing a big install the ah rating is more iportant than the CCA

and a high regular cycle can only help things along

dont forget a 100w RMS X2 amp will draw about 300W - 400W from your battery which works out to be about 30 A

im running 600w worth of amp and it draws almost 1000w from my electrical system

im using and optima yellow top and i get no dimming of the lights with all healights on

bottom line is the bigger the battery the better

I'm suprised nobody has mentioned alternators at all in this discussion.

Originally posted by MYGTST

im using and optima yellow top and i get no dimming of the lights with all healights on

How did you go fitting the Optima in the Skyline?

I am looking at a new battery for my 33 GTR as the factory one is tiny and rooted. I haven't taken all the bracing out yet so haven't sized up what I've got to work with but the options for the battery seem very limited by the size of battery you can fit in.

At the moment I am thinking of goind with the Odyssey 1000, but would much prefer the Optima/Exide if at all possible.

there is plenty of room in the back of the R33 GTR for a replacement battery, i am running the odyssey 1000 in mine, just had to make up a custom bracket to hold it down, and a little L bracket to make sure the battery doesn't move.. there is plenty of height and width available..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • They are what I will be installing. 640s for me.
    • Hmm... From my experience you get about 0.25° camber change per mm of RUCA length change. So, to correct from -2.5 up to less than -1° (or, more than -1° if you look at the world as a mathematician does) then you'd be making 6-8mm of length change on the RUCA. From a stock length of 308mm, that's 2-2.5% difference in RUCA length. My RUCAs are currently very close to stock length - certainly only 2-3mm different from stock. I had to adjust my tension arms by 6mm to minimise the bump steer. That's 6mm out of 210, which is 2.8%. That's a 2.8% change on those, compared to a <1% change on the RUCAs. So the stock geometry already has worse bump steer than is possible - you can improve it even if you don't change the RUCA length. If you lengthen the RUCAs at all, then you will definitely be adding bump steer. Again, with my car, I recently had an unpleasant amount of bump steer, stemming from a number of things that happened one after another without me having an opportunity to correct for them. I only had to change the tension arm lengths by 1mm to minimise the resulting bump steer. (Granted, I also had to dial out a lot of extra toe-in in the rear, and excessive rear toe-in will make bump steer behaviour worse). Relatively tiny little adjustments having been made - the car is now completely different. Was horrifying how much it wanted to steer from the rear on any significant single wheel bump/dip. And it was even bad on expansion joints on long sweepers on freeway entry/exits, which are notionally hitting both rear wheels at the same time. My point is, the crappy Nissan multilink is quite sensitive to these things (unlike the very nice Toyota suspension!). And I think 99.75% of Skyline owners are blissfully ignorant of what they are driving around on. Sadly, it is a non-trivial exercise to set up to measure and correct bump steer. I am happy to show my rig, which involves nasty chunks of wood bolted to the hub, mirrors, lasers, graph paper targets and other horrors. Just in case anyone wants to see how it is done. I'll just have to set it up to take the photos.
    • What do you have in that bad boy ? Ill go with the 725cc since I'll be going with Nistune ( would definitely like more engine protection but Haltech is too far out of reach at the moment... plus, Ill probably have a pretty safe tune as its a daily, not gonna be chasing peak power 24/7 ahahah ). Are Xspurt a safe choice?  Pete's great. He didnt mention anything about traction arm length so I reckon it may be good. When I get some new wheels/tire later down the road I'll ask him about it and get his opinion on em. I heard from Gary that you've got the bilsteins too, are you running the sway bars too? and what other suspension goodies do you have installed or would recommend?
    • In true Gregging style...  
×
×
  • Create New...