Jump to content
SAU Community

Recommended Posts

No power adders? You realise that in drag racing, turbos count as power adders?

Here's HPI's list for RWD over 2400cc

Car Engine Capacity Compressor Nitrous Tyres ET 60ft MPH Track Driver Workshop

1 JZA80 Supra 2JZGTE 2997cc T88-34D Yes BFG Comp TA 275/75R15

10.466 1.616 131.38 WSID Nabil Morcos C&V

2 Z32 300ZX VG30DETT 2994cc S15 x 2 No BFG Comp T/A 275/50 15

10.894 1.69 131 WSID John Penlington Unique Autosport

3 R33 Skyline GTS2t RB26DETT 2597cc AX53B60 x2 No Nitto 245/45R17

10.898 1.71 131.08 Willowbank Jason Appleton BSM

4 JZA80 Supra 2JZ-GTE 2997cc TD06-20Gx2 No Nitto 275/40R17

10.91 1.63 129.77 Heathcote Nigel Beale Ice Performance

5 Z31 Fairlady Z RB26DETT 2597cc HKS T04R No Brgstn 285/40R17

11.03 1.89 131.8 WSID Domenic Russo Autostyle

6 1982 Mazda RX7 13BT 2616cc GT42 No A032R 225/60R15

11.128 1.95 138.36 WSID Rod Spannenberg RX Engineering

7 R33 Skyline GTS25t RB25DET 2498cc ATP600hp No Federal 235/40R18

11.21 2.01 126 Calder Ryan Quinn ATP/Bresciani

8 1972 Toyota Crown 1FZ-FE 4479cc Trust TD07 No Simex 225/70R15

11.378 1.857 124.5 AIR Sean Gannon Self

9 S13 Silvia RB25DET 2498cc HKS2530x2 No Slvrstn 210/60R16

11.422 1.83 128.12 Willowbank Alan McLean Tokyo Toys

10 R32 Skyline GTS-t RB26DETT 2597cc Stock No Nitto 245/50R16

11.671 1.69 120.64 Kwinana Sean Tippett Self/SST

No power adders?  You realise that in drag racing, turbos count as power adders?

Here's HPI's list for RWD over 2400cc  

Car Engine Capacity Compressor Nitrous Tyres  ET 60ft MPH Track Driver Workshop  

HPI is only open to Japanese cars.

My M Coupe ran 11.088 @ 132.13 MPH w/ 1.879 60' time at WSID 21st July 2004 with BF Goodrich Comp TA 275/55 R15

  • 2 weeks later...

Hopefully this new intake manifold and blower will push me a bit further up the list. (currently #8)

Mr Blonde, I'm also going to be using some BFG D/Rads. I'm keen to see how they hold up. Without stalling up it went 1.80 60ft on the simex light truck tyres, so I'm hoping to drop into the mid 1.6's with the BFG's.

Did you just rev and dump, or did you slip the clutch out of the hole?

Cheers, Sean

Adelaide

apr25129wo.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok gotcha, so one post to fpr  another to bov  and I have the mishimoto boost controller and a link g4+ so I’d just have the tuner set it up properly. For the last two from plenum post throttle to  ecu/ boost controller, I know that I have a hose coming from the ecu that I was confused about so I assume that’s what connect to the boost controller from the ecu? And then the last is just from plenum to boost controller then to wastegate?
    • From there, it was just a quick electrical check, prime the oil and start her up Which, is not what happened. 1. Bloody seppo Aeropro battery holder. Not only was it too tall for the battery (which I'll forgive them for, I have another battery the same nominal size that is taller than Neil's one, but the bracket is a fixed height so the battery was spaced up) But the thing that really shits me is the hardware to hold it on requires a 7/32 Hex key. WTF. No-one will ever be able to remove or install the damn thing without a hex key they don't own 2. Kill switch no longer worked once the console was installed. Neil mentioned above he had to adjust the length but it no longer cleared the console once installed. Sorted. 3. Suspiciously, the brake light holders were hanging in the boot with no globes. Sure enough the stopper on the brake pedal was missing so they are always on unless the kill switch is activated. Will pick one up tomorrow (turns out 32 and 33 don't use the same stopper) 4. All that sorted, I turned on the kill switch, turned the key to ACC. Nothing. Turned it to IGN. Nothing. Checked some fuses and found the main IGN in the boot was missing which improved things once it was replaced. Now ECU and dash lights turn on with IGN but still no fuel pump. 5. Turned it to Start....ECU on, no fuel pump, no starter. Plus the voltage dropped straight to 9v.  I suspect the starter is f**ked but am going to have to work through it all and see what is happening, really looks like more than one issue. Does anyone have the R33 fuse box key with the circuit it sources from (eg BAT, ACC, IGN, SRT etc) and supplies? I can find a translated list showing Amps and circuit without supply circuit, and I can find supply circuit without Amps and target circuit.
    • 3rd time lucky, the AAC is now all plumbed up after getting some final fittings All set up under the plenum of maximum access
    • OK, so the weight has been bugging because it was really low. I did it again today and got a more believable answer at 1246 without driver And with a 93kg driver I'm pretty sure the car was still slightly on the quickjack last time meaning the full weight was not on the scales  
×
×
  • Create New...