Jump to content
SAU Community

Recommended Posts

yeah mate I agree with what you say, but the fact remains that almost every person I know (that's been through Regency) has been knocked back for coilovers. And yes, some older cars have been knocked back for saggy springs and had to go get new ones too.

Like Matt said, it just depends who you get on the day, and with some if you dared ask them a question as to why something wasn't allowed or, god forbid, complained, they would look twice as hard over your car.

yeah mate I agree with what you say, but the fact remains that almost every person I know (that's been through Regency) has been knocked back for coilovers. And yes, some older cars have been knocked back for saggy springs and had to go get new ones too.

Like Matt said, it just depends who you get on the day, and with some if you dared ask them a question as to why something wasn't allowed or, god forbid, complained, they would look twice as hard over your car.

Amen to that!

When ever your at Regency its "yes sir no sir, three bag full sir"

I wouldn't dare question an inspector!

90% of the time i am nice to the inspector they will be nice back but like its been said, just depends on the day.

PS. can you go through regency for us and prove that what you are preaching is true?

HSV GTS was available (since VY I think) with Ohlins adjustable coil over suspension - an Australian produced car.

HOWEVER, I'm sure they had to make it comply with the relevant ADRs, and I think this is the issue rather than the fact it is a coil over or adjustable.

Any component that is fitted to a vehicle that has not been proven to comply with ADRs, they can force you to remove, or to prove it does comply. The latter is not a cheap exercise by any means.

I'm guessing the manufacturers of aftermarket Japanese performance products have no interest in gaining compliance with our design regulations, as the cars they make them for were never to be sold here. Sure, some of them may comply - but who's going to pay to prove it?

chops has it in one. IF we put something on our cars that does not meet or comply with our ADR's they have all right to defect us. No matter if the after market parts are betr than the originals or not. in the event of an accident the insurance company can deny the claim if you have non ADR compliant parts on the car

HSV GTS was available (since VY I think) with Ohlins adjustable coil over suspension - an Australian produced car.

HOWEVER, I'm sure they had to make it comply with the relevant ADRs, and I think this is the issue rather than the fact it is a coil over or adjustable.

Any component that is fitted to a vehicle that has not been proven to comply with ADRs, they can force you to remove, or to prove it does comply.  The latter is not a cheap exercise by any means.

I'm guessing the manufacturers of aftermarket Japanese performance products have no interest in gaining compliance with our design regulations, as the cars they make them for were never to be sold here.  Sure, some of them may comply - but who's going to pay to prove it?

Got it in one!

Couldn't of said it anybetter myself

That could well be the case,but not all of us run shitty japenese suspension,and why wouldnt you question an inspector at regency?I would want to know if he knows what he's talking about and an answer so the problem could be resolved!

Regards,

SKYLINE (Kym)..

Kym, you really need to read the Regency thread started by Joel - you simply would not believe some of the shit said and done by the Regency inspectors. Catch any one of them in a bad mood and you might as well take a big jar of vaseline - no matter what car you have or how legal it is.

Kym, you really need to read the Regency thread started by Joel - you simply would not believe some of the shit said and done by the Regency inspectors. Catch any one of them in a bad mood and you might as well take a big jar of vaseline - no matter what car you have or how legal it is.

me?? You mean Steve? The stick regency thread?

That could well be the case,but not all of us run shitty japenese suspension,and why wouldnt you question an inspector at regency?

Firstly how and why is Japanese suspension shitty?

Secondly from what you are saying and they way you are coming accross it seems as if your regency experience is not exactly the best.

I think you should take it from the people that have been "in the field" so to speak, instead of "a friend of a friend" or "i heard".

How many time have you actually been through regency if you don't mind me asking?

And finally why WOULD you question an inspector, as far as they are concerned they hold the power to put you back on the road or not, if someone was tryin to tell me how to do my job i would reem them too.

well i just got my car passed by the cops and booked into regency 4 weeks from today. So i'm allowed to drive it til the appointment with no restrictions what so ever which my mates told me i would have! Dad's offered to take it in for me cause i made him read the regency experiences thread on this forum and he felt sorry for me.

mum's working but dad said he will make sure he can take it in for me, just a couple of things left to fix now, thanks for the engine stand and the ride Joel, was much appreciated and made me miss the VL for that low down torque, can't wait to get the motor all don and running!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Well, I'm tired. I'm tired because about 4PM yesterday, before today's appointment someone immediately bought my bumper. They couldn't get it any other day as they're on the way back to NSW. So I had to do that big GTR conversion I had been planning. Unfortunately, the information on SAU about what you need and how this is done is incomplete. So what should be a simple bolt on affair, yeah, it's not. Did you know if you use all GTR items the bonnet won't close? This little manuever sent me into about 1am the night before trying to dodge a way to get it closed. I will have to revisit this in the next few days  - or maybe not, I may let a body shop figure it out. It all needs to come up and my motivation to pull the bumper off is low. It also seems to hit things in the bay where the GTT bonnet didn't. Yes I used 100% new OEM GTR items. Today, I had the joy of driving to the dyno looking like this: Given I had roughed in the fuel and given sensible but pretty conservative timing, I didn't really bet on having the car drive out any real difference than when it drove in. Sadly due to a miscommunication and laptop fun and games (and almost bricking the dongle, prayers and firmware updates indeed), I ended up using HP Tuner credits to licence the car that was already licenced. So in the end my laptop was used. It turns out my butt dyno is still well calibrated after all this time. The 325kw was on 74% Ethanol, the 313kw line was on 98. The other line is the 'before' line which was 281kw. While the numbers are pretty low, they're pretty in line with what you'd expect. Even if US dynos bump the whole result up about 50KW, gaining 10-15% is similar gains.  The curve of the cam is pretty much spot on with what was discussed as well. All this said, it still feels bad to not see the number you secretly want to see. Even if the car drove great beforehand, and I knew pretty confidently the car would drive out much the same way it drove in due to the nature of a wellish dialled in LS1 not gaining much if anything at all from being tuned from where it was. As expected, the car isn't particularly sensitive to running it at anywhere between 12.0 and 13.0 - And the initial timing at 20deg and 12.0 made 308KW. So 3 degrees of timing, and leaning it out to 12.7 for 5kw, anything above stopped giving any benefit until E85 (which has an additional 2 deg as before). Car itself behaved entirely fine. I found out that 100C = 1.15V! IAT at about 7pm was 19C. I might mess with the bonnet mounting.. but given the REO NEEDS TO BE CHOPPED TO FIT A GTR BAR this is possibly something I may leave gathering (more) dust until it returns to paint jail.
    • It sounds farrrrrrr too cold at your place Duncan... Here I was thinking our 10 degrees overnight is getting cold...
    • oh yeah, reminded this morning....bin lids frozen shut too
    • In my case not, because of total reno. But yeah.
    • Did you use an electronic speedo drive? Does you speedometer read all the way to 180km?
×
×
  • Create New...