Jump to content
SAU Community

Recommended Posts

yeah mate I agree with what you say, but the fact remains that almost every person I know (that's been through Regency) has been knocked back for coilovers. And yes, some older cars have been knocked back for saggy springs and had to go get new ones too.

Like Matt said, it just depends who you get on the day, and with some if you dared ask them a question as to why something wasn't allowed or, god forbid, complained, they would look twice as hard over your car.

yeah mate I agree with what you say, but the fact remains that almost every person I know (that's been through Regency) has been knocked back for coilovers. And yes, some older cars have been knocked back for saggy springs and had to go get new ones too.

Like Matt said, it just depends who you get on the day, and with some if you dared ask them a question as to why something wasn't allowed or, god forbid, complained, they would look twice as hard over your car.

Amen to that!

When ever your at Regency its "yes sir no sir, three bag full sir"

I wouldn't dare question an inspector!

90% of the time i am nice to the inspector they will be nice back but like its been said, just depends on the day.

PS. can you go through regency for us and prove that what you are preaching is true?

HSV GTS was available (since VY I think) with Ohlins adjustable coil over suspension - an Australian produced car.

HOWEVER, I'm sure they had to make it comply with the relevant ADRs, and I think this is the issue rather than the fact it is a coil over or adjustable.

Any component that is fitted to a vehicle that has not been proven to comply with ADRs, they can force you to remove, or to prove it does comply. The latter is not a cheap exercise by any means.

I'm guessing the manufacturers of aftermarket Japanese performance products have no interest in gaining compliance with our design regulations, as the cars they make them for were never to be sold here. Sure, some of them may comply - but who's going to pay to prove it?

chops has it in one. IF we put something on our cars that does not meet or comply with our ADR's they have all right to defect us. No matter if the after market parts are betr than the originals or not. in the event of an accident the insurance company can deny the claim if you have non ADR compliant parts on the car

HSV GTS was available (since VY I think) with Ohlins adjustable coil over suspension - an Australian produced car.

HOWEVER, I'm sure they had to make it comply with the relevant ADRs, and I think this is the issue rather than the fact it is a coil over or adjustable.

Any component that is fitted to a vehicle that has not been proven to comply with ADRs, they can force you to remove, or to prove it does comply.  The latter is not a cheap exercise by any means.

I'm guessing the manufacturers of aftermarket Japanese performance products have no interest in gaining compliance with our design regulations, as the cars they make them for were never to be sold here.  Sure, some of them may comply - but who's going to pay to prove it?

Got it in one!

Couldn't of said it anybetter myself

That could well be the case,but not all of us run shitty japenese suspension,and why wouldnt you question an inspector at regency?I would want to know if he knows what he's talking about and an answer so the problem could be resolved!

Regards,

SKYLINE (Kym)..

Kym, you really need to read the Regency thread started by Joel - you simply would not believe some of the shit said and done by the Regency inspectors. Catch any one of them in a bad mood and you might as well take a big jar of vaseline - no matter what car you have or how legal it is.

Kym, you really need to read the Regency thread started by Joel - you simply would not believe some of the shit said and done by the Regency inspectors. Catch any one of them in a bad mood and you might as well take a big jar of vaseline - no matter what car you have or how legal it is.

me?? You mean Steve? The stick regency thread?

That could well be the case,but not all of us run shitty japenese suspension,and why wouldnt you question an inspector at regency?

Firstly how and why is Japanese suspension shitty?

Secondly from what you are saying and they way you are coming accross it seems as if your regency experience is not exactly the best.

I think you should take it from the people that have been "in the field" so to speak, instead of "a friend of a friend" or "i heard".

How many time have you actually been through regency if you don't mind me asking?

And finally why WOULD you question an inspector, as far as they are concerned they hold the power to put you back on the road or not, if someone was tryin to tell me how to do my job i would reem them too.

well i just got my car passed by the cops and booked into regency 4 weeks from today. So i'm allowed to drive it til the appointment with no restrictions what so ever which my mates told me i would have! Dad's offered to take it in for me cause i made him read the regency experiences thread on this forum and he felt sorry for me.

mum's working but dad said he will make sure he can take it in for me, just a couple of things left to fix now, thanks for the engine stand and the ride Joel, was much appreciated and made me miss the VL for that low down torque, can't wait to get the motor all don and running!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Bump on this to not make another post, had a ‘head drain’ leak on me and have the engine out as we speak. Planning on just putting a new freeze plug back in , plug the tapped holes and just be done with that headache.    Now I still want to relieve pressure to allow oil to pass down the blocks returns easier. I’ve seen catch cans with multiple vents help folks with this issue on this forum.  I’m wanting to make my own. I have some pictures here of my setup if anyone can help how I should plumb and design the catch can I would deeply appreciate it !   rb25 Oil upgrades: 1.0mm restrictor n1 pump/billet gears extended crank collar  extended sump with trap doors/w welded fitting    
    • The Frenchy's kit is the way to go forward. A modern compressor that weighs about 1/2 as much, is at least twice as efficient, and will do a good job on R134a. And of course the kit has everything else you need to connect it up and have it work properly.
    • Hey all , I am in the process of having the AC system in my r32 GTST converted from r12 to r134a and I’m being told my compressor has gone bad and I will need a new one. I was wondering if anybody has any suggestions for what is the best route to go aside from dropping $1500 on a new oem one? I did see that Frenchy’s performance garage offers a kit to mount a Toyota compressor, has anybody actually used this kit on their car? Or is there anywhere I could purchase just a clutch? Any help is appreciated.
    • Well, your RB20 ECU loom won't have wires for the boost solenoid, that boost sensor, and possibly one or two other things. There could be differences in seemingly random things like the charcoal canister purge solenoid, because the 25DET has to handle boost in the vacuum system and the 20DE does not. I don't know - I haven't looked. It is very likely that all the most important things are same-same, being the main sensors like AFM, CAS, etc, and the injectors and ignition. Not that you'll need the AFM for the Haltech anyway. I would suggest that you would seriously want to sit down with the pinouts for both ECUs and just go through them and highlight green what is the same, orange what is different/missing, and make a plan from there. It's not going to be difficult. It will either be the same or need to be fixed.
    • yeaaa that's why I haven't done any wiring to the stock ecu harness because I have the haltech, but then that leads me to the other question of "is the pnp harness really plug and play?" or would I have to still switch some pins/wires over because the pnp is for the rb25det neo harness, and not for the rb20de neo harness. was really hoping to find something to spoon feed me since so many people have done rb20neo + t conversions, but man this is rough.
×
×
  • Create New...