Jump to content
SAU Community

Recommended Posts

hey hows it going, atm i am on a search for a R33 gts-s 2 door manual, as it is going to be done up as a show car.

I have a coupel of questions that i need anyone to help me with pls

Ive done alot of searching and check out heaps of boot displays all looking awsome.

1. if i airbrush a sub woofer, would it defect the sub woofers performance in anyway or muffle its sounds???

2. is there enough room under pass seat for a PS2 to sit?

3. Where can i get a 12v power suplly for the PS2 to run in car

4. anyone got measurements of the boots

Im looking at running to 12inch kicker square subs, 2 1000wtts (600r), alpine deck, tv monitor above deck, slpine 6 1/2 inch splits in fron, same in back running off a 800w alpine deck, subs are air brushed and there are words in there sum where but cant explain all of it as i need the idea to be MINE hahahaha

any help would eb great thanks

AHHH 33

Link to comment
https://www.sau.com.au/forums/topic/72259-a-few-questions-and-stuff/
Share on other sites

I would reccomend looking at other amplifiers than Alpine, as there is a lot of quality out there... namely the US brands: Boston, Phoenix Gold, just to name a couple i have dealt with.

PS2 will fit under the passanger seat, all you need to power up is a transformer 12VDC-240AC (available from most Auto shops). Alternatively you could modify the PS2 itself and run 12VDC directly to the PCB in the PS2 if you know what you are doing.

Personally, i would highly recommend XBOX due to its inbuilt HDD, and capabilitys as a Media Centre, once it has a modchip installed. this will help greatly when driving on bumpy roads! You will also save money on having to buy and extra DVD player for the TV screen, unless your deck is DVD capable.

Dont forget about cabling and sound deadening...

I just recenlty spent $1500 on cabling, sound deadening and optima battery. No point getting compettition components without installing it properly IMHO.

Also i wouldnt worry so much on getting top end speakers for the parcel shelf, as their main purpose is primarily for refill, and SQ isnt really a main factor when you have a quality front stage!

If you are interested in some prices on a high end setup, drop me a PM, or add me to msn and i should be able to help you out!

PM me if you want my msn details, and ill help you out as much as i can.

no airbrushing won't effect, the performance, i spose theoretically it'll make the cone slightly heavier, but it will be really really negligable only thing u wanna make sure of is that if u have any cone flew which might cause the paint surface of sumthin to crack or what effect the crazy vibrations will have on the artwork.....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • What can't be done with a little bit of decking board or similar timber bolted to a hub flange via 2 wheel nuts is not worth talking about.
    • I noticed something. On the tps sensor and the sensor behind the adjustment screw is adjusted towards the far left. Are these screws supposed to be centered? (this sensor was in the same position before the tune as well)  Also attached a photo of where my car usually idles at when warm (sometimes a tiny bit above that). I think I might have screwed up the calculation and it might have better than I thought lol at 750rpm still not 650rpm though.      
    • So for both general interest of engine health, and to rule out any coolant/oil issues, I organised an oil analysis done on the 125,000klm oil Results below, all good, just a bit of fuel dilution which I'm not too worried about
    • This is actually a really good way of measuring what wheels fit. If only there was a similar measurement between hub face and suspension :p That said, it's probably pretty simple to actually measure it all with the wheel off the car for the rear. The front is a bit more complex but.. 
    • Being the top Google search result for R34 wheel-related inquiries, lemme throw down my experience. I calculated that 100mm from hub face to wheel face is about the perfect fitment for my ENR34 sedan.  I've been running 18x8.5s, ET35, with a 1" spacer. So, 8.5in to mm = 216mm. 216/2 = 108mm. 108-35 = 73mm. 73+ 25 (1" to mm) = 98mm.  If you wanna get close to this on dif widths, here are the offsets you'll want: 9" - ET around 15mm 9.5" - ET around 20mm 10" - you're crazy, but ET around 30mm All these should fit perfectly on a non-widebody, non-GTR Skyline. Note that it's probably the absolute max, and you're probably better off running a couple degrees of camber in this config, but it looks great, super flush.
×
×
  • Create New...