Jump to content
SAU Community

R32 Headlights..... yes, again ;)

Bazelinez

By Bazelinez,
in General Maintenance

 Share

Recommended Posts

CerealKiller Veteran

CerealKiller

Posted
Posted

apparently projector lights are better but they need to be pointed upwards so you can see 3m in front as opposed to the 2m...;)

Not sure what you mean about pearl vs clear.

Seriously the only way to make a real difference with R32 headlights is to retro fit a HID kit, unfortunately it costs a fair bit.

Cubes Grand Master

Cubes

Posted
Posted

I noticed a definite difference with the later model projector's.

They do need to be angled up slightly as the Coco pops Killer said so his self. :cheers:

I think the lenses go clear when they are stuffed.. I had one do it on my old set of head lights. It also didn't put out as much light. Unsure really.

Cubes Grand Master

Cubes

Posted
Posted

I also like the standards a little better.. Not the 89 model conventional types but the projector style without the ring around the outside.

With the ring around the projector it makes the head lights stand out a little too much. Looks kind of strange.

While we are on the topic of headlights does any one know of a method or some one who can recondition the silver lense? One of mine has started flaking a little. :cheers:

Bazelinez Proficient

Bazelinez

Posted
  • Author
Posted

They're identical to the ones you pictured. My GTST had the GTR front end with the grill etc so they have the tags on the side of the lights and everything.

They are in perfect condition apart from the lens on the right head light has come loose in the corner and needs to be stuck back down. head light apart job.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Trilbyte
      RB25 S2 Idles but doesn't want to rev

      By Trilbyte · Posted

      Update for the sake of closure   Ended up getting the intercooler piping all sorted, new plugs and yellow jacket coils, and she was idling mint until it warmed up while I was bleeding the cooling system. Found the misfire to be localised to cyl 3 by unplugging coilpacks, ran a compression test, that checked out, then decided to get a mate to check if that spark plug was firing out of the motor. Upon cranking it over, with the injectors disconnected, the car actually fired and ran on a couple cylinders and heaps of fuel came out the top of cyl 3 I'd say that injector's either spraying incorrectly or spraying far too much, which is fine as I'm planning on replacing them anyway I'm planning on making about 250kW on flex fuel, and have a set of 1000cc injectors from ozautosport, obviously overkill but I'm planning on building the motor and running more boost further down the line, do you reckon they'd be too big for a smooth idle on 98? Thanks for the replies gents, much appreciated
    • Dose Pipe Sutututu
      Any feedback on GReddy Turbine Kit T620Z in r33 GTST/RB25DET?

      By Dose Pipe Sutututu · Posted

      Nice modern Hypergear high flow would be perfect.
    • Murray_Calavera
      Steps to DIY sanding car back ready for respray....

      By Murray_Calavera · Posted

      I'm confused. You said you want to "remove the clear coat from most panels" but it sounds like you are actually doing a full respray? Few random things to add -  If you chase the blistered paint with 120 grit, I can almost guarantee you'll chase it down to bare metal (that's fine). But if you paint the car from here, you'll have nice little indents where ever the blistered paint was. The new paint won't magically level out the low areas, you need to fill them. Which leads me to the main point I wanted to add, make sure the whole car is flat before you paint it. All those areas with blistered paint you sanded out, make sure to fill them and triple check they are flat with a block guide coat. I'd also check the whole car is flat with a large block and guide coat but yeah up to you if you want to go that far.   
    • Duncan
      Any feedback on GReddy Turbine Kit T620Z in r33 GTST/RB25DET?

      By Duncan · Posted

      300hp (225kw) is barely outside the standard turbo's range with a bit of extra boost in it (200ish). If you are going to change the turbo you should aim for 250-300kw (330-400hp) to make the expense worthwhile
    • Murray_Calavera
      Any feedback on GReddy Turbine Kit T620Z in r33 GTST/RB25DET?

      By Murray_Calavera · Posted

      A couple of things, firstly omg that turbo is expensive! $3,000 USD for dinosaur technology is robbery. You could buy a G series turbo and have a good amount of change instead.  If you want a good budget option, have a look here - https://hypergearturbos.com/product/rb25dethighflow/ If you are keen to spend more, have look at the modern turbos, Garrett G series, Borgwarner EFR, etc. Have a look at the RB25 dyno results thread for inspiration.  If you upgrade your turbo to something that will support the 300hp you want and only "probably" have Haltech ECU, your car will only "probably" run. Actually, no it won't run. You are going to need the ECU and injectors at the time you do the turbo upgrade.  No thoughts on "this much boost" as you didn't say how much boost that actually is. Having said that, plenty of unopened RB25's making even more power then what you are chasing.   
×
×
  • Create New...