Jump to content
SAU Community

End of the world as we know it Jim!! no more modified cars allowed to be imported!!


Recommended Posts

from mr risbey's list

If you want to import a modified vehicle, the next 2 1/2 months (to the end of Feb 2003) are your last chance.

Best reports at this stage are that under the new import scheme, vehicles will have to be COMPLETELY stock standard when they are complied. This is something that was anticipated to some extent, however the Govt. are taking a very strict stance and are stating that vehicles with any modified parts will have to have these removed (with evidence of their destruction supplied on request) and genuine manufacturers items fitted.

For example, a Skyline with an expensive APEXi exhaust, BOV and airpod would have these removed during compliance, the perfectly good parts would have to be destroyed, destruction certificates provided, and a genuine Nissan airbox, exhaust and catalytic convertor fitted to get it through compliance. Indications are that substitute aftermarket items that replace manufacturers parts will not be acceptable. There may be an exception made for aftermarket wheels providing they are not too much larger than the factory size, but currently this seems to be the only concession.

Obviously, under this regime, importing a vehicle with any significant level of modifications will not be cost effective. This would appear to be a very intentional result of the new import scheme.

No one knows how this will actually work as time goes on, perhaps the rules will relax somewhat to make the scheme more workable but this appears doubtful.

What we do know is that the Govt. is continuing to do their very best to restrict the viability of vehicles to be imported while pretending they are providing a great new scheme targeted towards enthusiasts. This allows the number of imports to be minimised by stealth while avoiding a concerted public outcry which would probably have some positive impact on the direction of the scheme. If anyone complains about the restrictions of the new import scheme, the changes can always be blamed on getting rid of "unsavoury industry elements in the old scheme", or "safety concerns of imported vehicles", or "improving the .

Things are tightening up right now with compliance workshops becoming nervous to comply modified vehicles even under the old import scheme, so you'd best hurry if you want to import a modified vehicle and save as much as $20,000 to $30,000 over making the changes here in Australia.

  • Replies 50
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

sucks Ritchie

the whole game is going to change in a big way. I will cost big dollars to do any thng now and there wont be the cheap parts floating around from the importers who have taken them off.

not good for the enthusiast whothis scheme was designed for.

meggala

just glad my 180 is on its way :D

One good thing is hopefully the resale price for those who own skylines etc will remain more stable rather than plumeting.... on the other hand those trying to buy an import wont be able to find the incredible bargains that currently exist..... :D

Buy up guys...

That's one thought that crossed my mind when I bought my car.

The resale value on a car that you can no longer import into the country AT ALL as low volume can't be too bad. Well I'll hope for the best :D

Originally posted by BY BY

One good thing is hopefully the resale price for those who own skylines etc will remain more stable rather than plumeting.... on the other hand those trying to buy an import wont be able to find the incredible bargains that currently exist..... :)  

Buy up guys...

I just did :D:bahaha:

What's your opinion of re-shelled vehicles....

I have a clean R33 Plate which is eligable for engineered re-shell... The law is such that no parts are required of the original vehicle....

How easy would it be to import a highly modified R33 as rally race use?? Then re-shell is with the local ID??

This is 100% legal, and may be the only way to legally import and register a modified vehicle if I'm correct??

I read that email late last night when I got it, I'm finding it hard to belive that it'll really happen, there will be some way around it, and I also belive that compliancer(s) will turn a blind eye to some things, as some do now.

Hmmm...

Well it will have impact... but think about how it will pan out.

Less cars become available to be imported into Australia., which may rise prices on certain models. Seeing as the Japanese love their mods and even if its just ricing, the supply will be much(?) smaller and therefore i assume prices go up.

Japanese go "oh well, bad luck australia" flog the modifiied vehicles off to NZ, UK, or wherever else normal imports are allowed. The amount of effort to do it for australia seems like they wouldn't bother or it would otherwise be expensive.

The big "parts must be destroyed" is rubbish... the preauction process will ensure the parts are just taken off and sold because its just money thrown away to them. If anything, a wide variety of standard modified items will become available to be bought from Japan to be fitted back on locally.

To me wouldn't it end up being the same roughly? modified parts are taken off (and sold later for profit)... standard items fitted back on again (which would be cheaper correct than the equivalent modified?), and the cost to whoever pretty much the same???

No doubt they'll realise this and crack down on aftermarket parts later.

Originally posted by Dr_Drift

What's your opinion of re-shelled vehicles....

I have a clean R33 Plate which is eligable for engineered re-shell... The law is such that no parts are required of the original vehicle....

How easy would it be to import a highly modified R33 as rally race use?? Then re-shell is with the local ID??

This is 100% legal, and may be the only way to legally import and register a modified vehicle if I'm correct??

re-shell laws are changing quickly, you will need certain evidence from the wrecked car and soon may need to have both cars available in parts for the engineer to inspect .. they are trying to make it harder for people to abuse the system by bending the laws in the way you are suggesting (damn, eh?)

... the other trouble is that re-shelled cars are also supposed to be legal and roadworthy, in similar condition to compliance vehicles.

i think it will for sure but going to be interesting to see what happens in Japan.. Don't forget that NZ changed the laws to allow only vehicles after 96 I think. I with ex static think there will be a bigger market for 2nd hand and new parts and also more people modding cars. as long as the epa and cops don;t get us first. we all should be driving white avalons no doubt. sounds like george orwells 1984. Dunno how it will affect the price of 2nd hand modified vehicles.

Don't forget people you can always let your feelings known to those in Canberra who make theses decisions.

Interest groups such as the Gun Lobby is quite organised in this regard. Maybe we should follow their lead.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thanks Dose.....    I appreciate it!!
    • I'll probably be putting the shit box back on the dyno again soon, I want to dial in the closed loop boost control properly. I'll have a camera facing the car/motor for fun too. Just note, there are essentially 3x 10AN inlets going into the catch can and 1x going back to the intake pipe. Most of the time the catch can "return" to the sump actually is the crank case breather, pushing air out.
    • I have the R3C with a Nismo slave and by no means does it behave like a stocker, it ain’t THAT bad. On take off just give a bit more throttle than you would say a coppermix and it’s fine. It will not slip though.   
    • Okay. Final round of testing done. Got a friend to hook up a fancy scanner to the car and we also ran some compression and leakdown tests, she is healthy.  The MAF was definitely the culprit. So for future reference anyone with similar issues that find this thread. I suggest the following steps, in order of affordability:   Check your spark plugs for any fouling, replace plugs if they are bad or re adjust the gaps making it narrower (0.8mm would be good). Check every coil's resistance with a multimeter. It can be done by probing the IB and G pins on the coil pack. Resistance should be around 1.4 (+/- 0.1) Ohms Check the MAF. If you have Nissan connect or a good scanner with the 14 adapter it should allow you to see the voltage on the MAF reading should be around 1.1 - 1.2V when car is idling. But if you don't, buy a new MAF from Amazon and test, then return it. (For instance, I got a Chinese one for $40 that was reporting 1.3v on idle). If you still have scanner, you can run tests on the injectors to see if they are working, just remember to unplug the fuel pump fuse/relay and have no pressure on the line. Then listen for the noises that the injectors make. Clean/replace injectors as needed. Once you find the issue and fix, order thousands of dollars worth of OEM parts to refresh unrelated things (Optional)   PS: Thanks to the absolute legends of this forum for the responses and help to someone that went a bit over their head. (me)
    • Ha ha ha, so they stopped the bearings spinning on the one you want, but then decided the crank hub should slip instead 😛   Stick to RB, at least you can work on it yourself. And now it doesn't smell of vapour   Also I still believe there's a chance your new flap doesn't "pop", as even though the engine might breath hard, it has a direct path with no restriction to the inlet, which when on boost should pull a bit of suction for you. If you do get pressure in the catch can id be very intrigued. Time to put a boost gauge on it, and a session at the track, then solid cover your vent and do another session
×
×
  • Create New...