Jump to content
SAU Community

Recommended Posts

Hi guys,

I am a fresher in this forum, just joined today. I was planning to upgrade and am half thinking about a R34 GTT tiptronic. Hence had few enquiries:

- Whats the stock performance specs 0-100, 1/4 etc etc.

- Approx how much it wd cost to make it a 11-12s car.

-How upgradable the turbo is to a bigger replacement, power gain, cost.

-Pros/Cons of tiptronic.

If you could please help. I tried the search feature, but still bit confused.

Brief inputs on any of the above wd be appreciated.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/72637-r34-gtt-enquiry/
Share on other sites

Rough guess, 6.5 seconds and 14.2. Unofficial attempt at realistic figures.

Big $ difference between 11 and 12 seconds and a couple of different ways to get there.

Turbo is almost the same as R33 (same fitting anyway) so anything that fit that will fit R34. 100's of options at all different costs.

Tiptronic is easier in traffic, cheaper to upgrade (ie a shift kit costs less than an upgraded clutch 350-1000+) goes a little slower, can't use PowerFC for ECU upgrade.

Rather than a search, perhaps a few weeks browsing will sort you out for information. I read the forums for 3 months before I bought my car.

Link to comment
https://www.sau.com.au/forums/topic/72637-r34-gtt-enquiry/#findComment-1336466
Share on other sites

Maybe

12.9 seconds will require 200 rwkw AT LEAST.

To get an R34 GTT at 200rwkw you will need the following.

Front Mount $1000

Power FC $1200

Boost controller $500

Fitting and tuning of all $700

Pineapples fitted $200

Fuel Pump fitted $400

That's about $4000

.THEORETICALLY. That should net a 12 second pass.

More likely with sticky rubber.

Into the 11s...... You need about 270 rwkw.

For that you need a brand name turbo ($3000 fitted) or highflow ($2000 fitted)

Cams $1200 fitted.

Retune of computer $500

Slicks or Nittos $800

That another $4500 - $5500

Into the 10s? Forget ot before you budget another $10 - $15k.

BASS OUT

Link to comment
https://www.sau.com.au/forums/topic/72637-r34-gtt-enquiry/#findComment-1336895
Share on other sites

Manual would get a flat 6 i would think.

I just bought a 34gtt tiptronic. I guess u also

have to allow for increased drivetrain loss for

auto. I don't know what power the auto can take

apparently high temp is killer so fit a good cooler.

Tiptronic pro's: auto mode - same as any auto

tiptronic mode - good for compression slow downs,

hill climbs, its a novelty(steering wheel shifts are a

bit of a wank imho)

Cons: slower than manual to up/down shift, for me

at least (after owning for 2 weeks only) more difficult

to control than manual - sure Ill get used to it.

Manual is better apart from traffic stop starts, but

for an extra $5-6k i couldn't justify it. Esp when conversion

can be done for approx $3k.

Link to comment
https://www.sau.com.au/forums/topic/72637-r34-gtt-enquiry/#findComment-1337869
Share on other sites

Thanks a lot everyone for all the inputs. Now I know more. Just planning ahead the finances I should prepare for. Looks like a big threshold credit cards required ;) . Money well spent for the R34 cause.

Also, I really just noticed the differemce between bodies of GTT and GTR (HOW could I not notice it before???)- the wide body of the GTR. THATS why they look sexier....

Link to comment
https://www.sau.com.au/forums/topic/72637-r34-gtt-enquiry/#findComment-1337980
Share on other sites

Zymotic - It already has a good cooler for the transmission standard.

I actually find that possibly due to the cooler, it doesn't warm up fast enough.

You'l find that if you use the steering wheel buttons for a couple of months you'll never look back and wonder why you said it was a bit of a wank.

Link to comment
https://www.sau.com.au/forums/topic/72637-r34-gtt-enquiry/#findComment-1337983
Share on other sites

Zymotic - It already has a good cooler for the transmission standard.

Good, how much power before it goes bang?

You'l find that if you use the steering wheel buttons for a couple of months you'll never look back and wonder why you said it was a bit of a wank.

Think I'm still getting used to the semi-auto type setup.

Maybe after i get used to the standard shift I'll trial the

wheel controls.

Do u use tiptronic mode for the track or drags?

Do u keep TCS on for track? (I've noticed when i give the

car a bit of stick one side of the rear seems to deaden [for

want of a better term] guess this is TCS at work, its wierd)

Had any dyno runs with your new hi flo?

Link to comment
https://www.sau.com.au/forums/topic/72637-r34-gtt-enquiry/#findComment-1338475
Share on other sites

Hasn't gone bang yet and I'm over 200 rwkw.

I wouldn't even bother with the standard shift.

I use tiptronic everywhere, street, track, strip.

I also turn the Traction control off as soon as I start the car every time. Actually it's been broken for a week which is fine with me.

Link to comment
https://www.sau.com.au/forums/topic/72637-r34-gtt-enquiry/#findComment-1338780
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It only looks tidy, as most of the stuff that was on the whole back wall, is now in the trailer to go to the tip, or has been shoved in my 2.2x2.4m "Spare parts room", and now I can't get to anything in there Ha ha ha I could definitely do with a bit more space, but I'd just end up with your problems I'm going to enclose the car port beside the garage, and move a lot of stuff into it I think. OR... It will be setup as a fabrication area, and the main garage will have parts storage in it. I'm not sure yet... Need some pictures of that big shed you've got with the bikes and Skyline in
    • No. I think it's gone. 😭 I think you can get body coloured ones on eBay so I think I'll get one of those... Or just hang a red ribbon from the hole and whack a TOW sticker next to it.
    • Can't say I've had a bad experience with one on my car, then again it only gets washed once or twice a year... The wheels on the other hand, get a good spray often due to my shitty dusty pads.
    • @MBS206 thats pretty neat and tidy to me!  I'll get a photo of mine when I'm out there next. It might require multiple photos to understand the scale of the atrocities though... In total I have 4 sheds of varying sizes and layouts. Main shed is 14x8, second shed is 3x8, third shed is 11x2.5, fourth shed is around 6x4.  All are pretty much full.   The main goal of my cleaning tsunami is to make the main shed predominantly car and motorbikes only. Second shed is my metal fab room (2 x bench grinders, drill press, bench belt sander, metal band saw, scrap metal storage and some of my garden tools.  3rd shed is more bigger garden stuff, storage for engine crane, jack stands, concrete grinder, concrete mixer, air compressor lives there, and it now has two 2mx2m pallet racking shelves with itemised boxes holding building stuff, electrical stuff, plumbing stuff, etc, etc.  The 4th shed is Ryobi electric ride on mower, mini boom sprayer, ancient Kubota tractor, more garden stuff!  I have got a lot of shit....  Then there's the pool house (8mx4m) and the pool pump shed (4mx4m).  I built all of the sheds over the 11 years we've been here.  The main shed was a Ranbuild kit, the rest are all custom made to fit the areas available. Building the main shed taught me a LOT as I had no idea about building anything prior to that!  I've still got one more in me. It will be my man cave which I poured the extra concrete for way back when I poured the concrete for the main shed. The idea is the Skyline will be a centre piece of the main cave once (if...) it's finished.  I told my now 14 year old son yesterday that I will 100% drive him to his year 10 formal in 2 years. Still a long way off but at least I now have a date to work towards! 🤣
    • Modern oils are amazing. Add tyres to that as well.
×
×
  • Create New...