Jump to content
SAU Community

Recommended Posts

Does it go away when it has warmed up? Ive got a ticking noise when cold, you can hear it the most when its about 1/3 temp, then goes away once it gets to 1/2

Im guessing it’s an exhaust manifold leak its coming from that area. Im taking it to my bros to get checked out, but im 90% sure thats what it is. Could be the same problem’s??

hope this helps

oh yea and my sound is like a Ticka ticka ticka sound

Link to comment
https://www.sau.com.au/forums/topic/72696-strange-noise/#findComment-1337837
Share on other sites

take a long screw driver, put the metal part on the rockercover (the silver long thing) and then put your ear on the screwdriver at the other end. do this while the enging is idling.if you can hear the ticking noise quite loudly in your ear, its most prob you valve lifters. cheap way of fixing that noise? use thick oil like 15w or 20w.

Link to comment
https://www.sau.com.au/forums/topic/72696-strange-noise/#findComment-1337978
Share on other sites

i had the same problem with my r32...try changing your spark plugs and if that works your lucky...but if the noise doesnt go away it could be your coil packs.

iv'e had to to change all 6 of mine in the past year and its a bit of a bitch cause it could be one of them thats damaged or all of them. The problem with coil packs is you cant physically see which one is the damaged one. At about 200 bucks each my best advice is to replace 2 go for a drive and see if the noise has stopped. if it hasn't jus keep swapping the new ones around till u find the damaged one. Worse case scenario is they're all damged and you'll have to buy 6 new ones like i did....good luck mate.

Link to comment
https://www.sau.com.au/forums/topic/72696-strange-noise/#findComment-1338706
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes...but look at the numbers. There is a tiny tiny fraction of the number of Joules available, compared to what is used/needed. Just because things are "possible" doesn't make them meaningful.
    • Thanks for taking the time to post that ! If anything changes or happens please do update us. 
    • Somehow Vertimass/Oak Ridge National Labs has figured out a catalyst that can convert ethanol into C9-C10 hydrocarbons in basically a single step without ending up with a bunch of ethylene or similar waste products: https://patents.google.com/patent/WO2023224867A1/en I still don't think anything like this will keep us from needing to transition to EVs regardless along with all kinds of other electrification, but things like this will go a long way towards alleviating the problem of how to electrify things like planes. Renewable diesel is seemingly an easier problem as well, Chevron is already running refineries for the stuff and the primary feedstock is tallow and other waste fats from agriculture.
    • Ok so I have sorted everything with my uniclutch and  i can offer up a bit of feedback and some things that might help others.    I found problems with factory damper line. Weird shit and had trouble with peddle adjustment    I used this https://au.gktech.com/products/r33-gts-t-skyline-braided-clutch-line?_pos=2&_sid=22b01b9b9&_ss=r Also when adjusting peddle leave a bit of play. You can get into a over stroke condition easy.. Make sure you can push the slave forward after adjusting to confirm fluid can return to master then you will need to pump it up heaps…..not sure why but that’s how it is.    last thing the splined adapter is machined perfectly. If your input shaft is old like mine was I would put a bit of valve grinding paste on it and stroke it like a 15 year old. Just to give it a tad more clearance and to better match it to the spline.    reason is on a near flat shift I have had situation where the peddle returns a millisecond after you lift from the clutch. No slip or anything but I reckon this is due to tolerance on the spline being way tighter than stock clutch and binding for a sec. I think this will go away but also my spline was old. Box is old so I guess I should have checked better. It’s a super neat fit.    it feels light as and holds awesome without any noise    
    • My Fuga Hybrid is JDM, 2014 model but very similar to the V37 from the looks of things..same platform just physically larger and very comfortab;e
×
×
  • Create New...