Jump to content
SAU Community

Recommended Posts

Steering wheel vibration

Hi guys, I wonder if any of you had the same problem as what I am experiencing at the moment?

My steering wheel vibrates as soon as it hits 100km/h.

I have done wheel balance and wheel alignment.

My front brake pads are new.

I have noticed that depending on the road surface Freeway I can drive up to a 120km/h and nothing will take affect. Also I have noticed this happens when I accelerate suddenly.

But when I do it progressively the vibrations are not there or are very small.

Mainly the sped is around 100 when it happens.

Is there anything in particular that I am missing that I haven’t thought of? Wy is his happening?

Thanks

al

;)

Link to comment
https://www.sau.com.au/forums/topic/72730-steering-wheel-vibration/
Share on other sites

Wierd - did they test drive the car? did you tell them about this vibration? they'd probably be better to ask.

Yes,

They just tell me their people know what they are doing.

Even the other place didn't charge me full price as the wheels were balanced 110%

They have no idea about why this is......

help

I had the same probs you have.The car came with crap 17 inch chromes on and they made steering really wobbly.When I got new tyres put on and went to pick them up the guy marked 2 of the rims front and the other 2 rear.2 of them had buckles so they went on the rear and it was alot nicer to drive.Before it was bullshit at speeds around 100+kph

Now I have Volks on and they are a dream!!200+kph on a track with no wobbles.

So maybe you have slight buckled rim/rims on the front maybe?

I had the same problem with mine, 4 wheel balances and each time it came back! I finally found out that the tyres were really old ( the numbers are on the tyre and he could figure what they mean) and was told that they had probably sat for a long time in the same position thus making them out of shape.

The Car is R33 GTST

It will be one or more of the usual problems;

1. Out of balance tyres (are they balanced inner and outer? Or just one set of weights?)

2. Out of round tyres (easy to check on the balancer)

3. Out of centre wheels (do they lock securely over the hub centre?)

4. Out of round wheels (how is the run out on the inner and outer rims?)

5. Out of balance brake rotors (unusual, but does happen)

6. Worn wheel bearings (jack it up and check the movement, in and out top and bottom)

7. Worn radius rod bushes (you can see it, the rubber is torn and fluid leaking)

After that it gets obscure, eg; worn shocks can cause vibration after hitting a bump.

:rofl:

  • 2 weeks later...

Just put the new rotors in and the vibration is almost gone.

I Should have just machined my front rotors but few places told me they were under size.

That turned out to be crap as when I took them off they were 29mm.

So in conclusion I spent $430 on front rotors and I didn't have to. But now the problem is gone.

But for how loong as the rotors bed in to the pads ,we'll see!

What is lower steering?

It will be one or more of the usual problems;

1. Out of balance tyres (are they balanced inner and outer?  Or just one set of weights?)

2. Out of round tyres (easy to check on the balancer)

3. Out of centre wheels (do they lock securely over the hub centre?)

4. Out of round wheels (how is the run out on the inner and outer rims?)

5. Out of balance brake rotors (unusual, but does happen)

6. Worn wheel bearings (jack it up and check the movement, in and out top and bottom)

7. Worn radius rod bushes (you can see it, the rubber is torn and fluid leaking)

After that it gets obscure, eg; worn shocks can cause vibration after hitting a bump.

:D

Checked all of the above. Everything is positive.

Just changed new DBA rotors and machined my rears and the problem is almost gone. Still a bit of vibration evident. Only done 20km , will see what happens in the near future....

Al

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Evening fam, Pretty much what the title asks, I have looked all over and can’t find a proper answer expect one post from almost a decade ago which is vague. ive seen photos and they look pretty much identical, would an r33 GTR N1 reo work on an r32? reason I ask is they are cheaper to buy… $700 compared to 1k+ for an r32 n1 reo
    • Couldn't help myself, had to start putting it together.... It really is a solid bit of kit.  Probably stronger than i would have made it myself to be fair! 🤣🤣 Sweating like a pig after that.  Bloody hot and muggy day today, time for a swim now!
    • Yeah was thinking that. I've had the car go lower idle possibly around 650rpm every once in a long time after pouring fuel and would sound quite rough like a misfire, almost like it's shit fuel or something but who knows.
    • @Wazmond you are correct, my bad, was not my intent    https://www.facebook.com/share/15ZMn5oXtc/ Updated Event (so its not private and can be shared easier)  Attempting to coordinate a big push of Stagea's to this years GTR Festival. Great event last year and hoping for the same this year.    I've emailed them to ask to set a location aside for the Stageas for the show and shine - they are happy to do so if we can get them numbers, I'm happy to keep track of that. Entering as Nismo category.    I'll be road tripping up from Melbourne, would be cool to convey if people are interested, maybe there is SAU convoys from each capital? If you have ideas about that let me know.    https://gtrfestival.com.au
    • Just buy a bunch of covers off aliexpress, they're like $5 each. Rattle-can them and stick them on as needed/fly off.
×
×
  • Create New...