Jump to content
SAU Community

Recommended Posts

Steering wheel vibration

Hi guys, I wonder if any of you had the same problem as what I am experiencing at the moment?

My steering wheel vibrates as soon as it hits 100km/h.

I have done wheel balance and wheel alignment.

My front brake pads are new.

I have noticed that depending on the road surface Freeway I can drive up to a 120km/h and nothing will take affect. Also I have noticed this happens when I accelerate suddenly.

But when I do it progressively the vibrations are not there or are very small.

Mainly the sped is around 100 when it happens.

Is there anything in particular that I am missing that I haven’t thought of? Wy is his happening?

Thanks

al

;)

Link to comment
https://www.sau.com.au/forums/topic/72730-steering-wheel-vibration/
Share on other sites

Wierd - did they test drive the car? did you tell them about this vibration? they'd probably be better to ask.

Yes,

They just tell me their people know what they are doing.

Even the other place didn't charge me full price as the wheels were balanced 110%

They have no idea about why this is......

help

I had the same probs you have.The car came with crap 17 inch chromes on and they made steering really wobbly.When I got new tyres put on and went to pick them up the guy marked 2 of the rims front and the other 2 rear.2 of them had buckles so they went on the rear and it was alot nicer to drive.Before it was bullshit at speeds around 100+kph

Now I have Volks on and they are a dream!!200+kph on a track with no wobbles.

So maybe you have slight buckled rim/rims on the front maybe?

I had the same problem with mine, 4 wheel balances and each time it came back! I finally found out that the tyres were really old ( the numbers are on the tyre and he could figure what they mean) and was told that they had probably sat for a long time in the same position thus making them out of shape.

The Car is R33 GTST

It will be one or more of the usual problems;

1. Out of balance tyres (are they balanced inner and outer? Or just one set of weights?)

2. Out of round tyres (easy to check on the balancer)

3. Out of centre wheels (do they lock securely over the hub centre?)

4. Out of round wheels (how is the run out on the inner and outer rims?)

5. Out of balance brake rotors (unusual, but does happen)

6. Worn wheel bearings (jack it up and check the movement, in and out top and bottom)

7. Worn radius rod bushes (you can see it, the rubber is torn and fluid leaking)

After that it gets obscure, eg; worn shocks can cause vibration after hitting a bump.

:rofl:

  • 2 weeks later...

Just put the new rotors in and the vibration is almost gone.

I Should have just machined my front rotors but few places told me they were under size.

That turned out to be crap as when I took them off they were 29mm.

So in conclusion I spent $430 on front rotors and I didn't have to. But now the problem is gone.

But for how loong as the rotors bed in to the pads ,we'll see!

What is lower steering?

It will be one or more of the usual problems;

1. Out of balance tyres (are they balanced inner and outer?  Or just one set of weights?)

2. Out of round tyres (easy to check on the balancer)

3. Out of centre wheels (do they lock securely over the hub centre?)

4. Out of round wheels (how is the run out on the inner and outer rims?)

5. Out of balance brake rotors (unusual, but does happen)

6. Worn wheel bearings (jack it up and check the movement, in and out top and bottom)

7. Worn radius rod bushes (you can see it, the rubber is torn and fluid leaking)

After that it gets obscure, eg; worn shocks can cause vibration after hitting a bump.

:D

Checked all of the above. Everything is positive.

Just changed new DBA rotors and machined my rears and the problem is almost gone. Still a bit of vibration evident. Only done 20km , will see what happens in the near future....

Al

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My idle is set at 950rpm though - Moving the timing around 20 degrees is not really what I'd call a calm idle. That said... neither is chop, by definition. The LS ECU likes to adjust timing to hold idle as opposed to air. It'd work, but generally speaking there'd be a discrepancy in the base idle and the IACV would want to move the timing around anyway to maintain said idle. I think I'm just going to keep the timing steady anyway. Preserve my engine mounts.  My aircon is now officially regassed. As the guy was reversing I noticed my reverse lights do not operate, along with my reverse cam. This is a bit distressing, because 100% of guides talk about which wire to connect to backup cams as "the goes with the [other color] wire". Often when doing conversions. Unfortunately the R34 colour wires aren't documented Unfortunately I had a T56 Magnum gearbox with it's reverse switch, which also isn't documented. Unfortunately there's definitely not documentation for people with both of these in the one car. Unfortunately I forgot. After many hours of this, I have a reverse cam and reverse lights again. The wire going through the trans tunnel to the reverse switch had broken. Upon inspection, it looks like this one wire had about 7 spade terminals and extensions in it.. for reasons I cannot possibly comprehend. I also spent the 750 hours required to clean up the wiring behind my head unit which now looks like this: This is a monumental improvement relative to what used to be there WRT triple gauges, head unit, traction control, wideband controller, and whatever the f**k OEM stuff still exists there in various states of connectivity/needed. Next step is to check in at the Exhaust shop to see/confirm how much clearance I have, to decide what mid mufflers or 'resonators' (which are just straight through, narrower mufflers) I can add and hopefully cut out a lot of exhaust leaks, pinhole, v-band or otherwise. But first step will be to 'take a look' before the next step.
    • Fark the AFM card and Nistune, Haltech Nexus S3, DBW, cruise control, flex fuel, dis dat.  
    • It's most likely the bolt/bush where the cover bolts back wore and allowed cover to move forward.
    • Still haven't put the injectors and R35 AFM in so we can tune the bloody thing for the HG highflow it got mid last year! I think I can forecast the upgrade path to a bigger twin scroll, external gate, Haltech, flex setup, Samsonas, dis dat, etc will be .... a while away!
    • Should have taken that opportunity to slot in a twin scroll turbo setup. Maybe next time.
×
×
  • Create New...