Jump to content
SAU Community

Recommended Posts

Have been thinking of buying a Nismo 320km dash for my R33 GTSt.

Only problem is as it's an auto, will this affect the workings of the dash etc? apart from the obvious of losing the PRND21 dash display?

Any info on this would be much apprectiated.

Link to comment
https://www.sau.com.au/forums/topic/72918-nismo-320km-dash-r33-suit-auto/
Share on other sites

  • 3 weeks later...

Hey Guys,

I've just ordered one from Nengun, just wondering what would the top speed be if I installed POWER FC to override 180Km/h Cut off?

What's the highest you guys have gone in urs?

And did a normal autoelectrician install it or did u do it urselves?

Cheers

Iceduck

i know for a fact a speedo from an automatic r33 will read very low when used in the dash of a manual r33. i believe this is due to a difference in the speedo sender in manuals/autos.

so if you install a speedo that is meant for a manual i am quite sure it will read very high.

it's not the diff ratio. it's difference in the speedo sender in manuals/autos in the gearbox

so if you get an 320km speedo from a manual and put in ya auto it'll only read about half of the speed of what you are actually doing. eg: if you are going 60k it will only read about 30k or less

it's not the diff ratio. it's difference in the speedo sender in manuals/autos in the gearbox

so if you get an 320km speedo from a manual and put in ya auto it'll only read about half of the speed of what you are actually doing. eg: if you are going 60k it will only read about 30k or less

apexir33 is spot on, as far as i have found the difference is due to the speedo sender. and it will read about half or double (depending on which mismatch it is)

Hm, when I'm doing 100 on my speedo, it is actually 91 according to the speed check LCD on Princes Hwy from Geelong to Melbourne. Mine is converted auto with stock manual gearbox and retaining the auto's 4.3 diff. Based on your argument, it's not half, it's only about 5%. I think a factory manual R33 with 4.11 when cruising along at 100, it will show around 96 or 97 on the same Geelong speed check display.

speedo sender in manuals/autos in the gearbox

Sorry, I missed this.. if the speed sender is in the gearbox, then yes, you're right then... because my gearbox is now manual, the manual speed sender should be in the gearbox when I converted it, and I have a manual, 300kph nismo speedo. It was still the same case with stock manual speedo, 5% less, which is contributed to the different diff ratio.

Sorry, I missed this.. if the speed sender is in the gearbox, then yes, you're right then... because my gearbox is now manual, the manual speed sender should be in the gearbox when I converted it, and I have a manual, 300kph nismo speedo. It was still the same case with stock manual speedo, 5% less, which is contributed to the different diff ratio.

I have a 320KMPH nismo speedo on my R32 GTR 2 speed manual and an apexi multichecker.

when I'm going 120 on the speedo the multichecker reads only 111 ish. but the speedo feels more right. Is there a way to check which one is more correct?

Also I read that a stock R32 GTR can get up to 250kmph max, is this a gearing issue? I've been over 200 and it's not that close to the redline.

When changing wheel sizes we know it can put the speedo a bit out of wack & I've heard this can be corrected by either changing the sizes of the trans gear or driven/ speedo gear to which the speedo cable is attached to. This will change the rate the speed is read; there were ratios to work out which size gears to use but that part went over my head. So, not sure if similar concept could be applied here.

Anyways, I thought an auto electrician should be able to recalibrate the manual speedo cluster to fit an auto to give correct reading.

Also I read that a stock R32 GTR can get up to 250kmph max, is this a gearing issue? I've been over 200 and it's not that close to the redline.

Gearing plays a part, then traction loss, and as well as aerodynamic drag... All this making achieving 250 possible top speed seems forever, best done on a very long straight like the Motor's top speed test in Avalon Airport or car testing oval circuit with cambered corner? An R34 GTR with 6 speed makes it possible to achieve more 250km/h Motor magazine I think had a modified R33 GTR achieving close to 300km/h

Thanks for the Info. So it is actually not a redline redline limit that dictates the top speed.

There for if the environment was right, eg, very straight road/track and you decided to test your top speed, it won't hurt your engine as much as using a car for drag.?

Gearing plays a part, then traction loss, and as well as aerodynamic drag... All this making achieving 250 possible top speed seems forever, best done on a very long straight like the Motor's top speed test in Avalon Airport or car testing oval circuit with cambered corner? An R34 GTR with 6 speed makes it possible to achieve more 250km/h Motor magazine I think had a modified R33 GTR achieving close to 300km/h

Well provided you didn't slam your gears to get there as fast as possible (like in drag racing) I suppose it will be more gentle on your engine and gearbox. However prolonged high revs to achive that top speed (e.g. 6000rpm in 5th) may possibly do some bad things to your engine/tranny, especially if the car is not in top condition.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seemed to be good when Jeff owned it but they did a shit job on my car, probably worth a think before spending 10's of thousands of dollars where they might be cutting corners
    • Starting with issues 1 - 5, we have already run into a problem...!  Issue #4 contained 2x front brake calipers, instead of 1 caliper and 1x steering knuckle. Will have to call DeAgostini on Monday to sort it out. Anyway here's some photos.  Issue #1 is the front bumper, headlights and number plate. Issue #2 is the front wheel (with "We produced with spartan air." text on the centre cap!) and tyre, the front lip spoiler and cylinder head cover with ignition coils under the centre cover... which will never be seen again. Issue #3 is the bonnet and cylinder head. Issue #4 is the front strut, brake disc (with laser etched metal discs) and brake caliper. I stopped here because of the issue with the missing steering knuckle.  Next update will be #5 - #10 in a few weeks.
    • DeAgostini is one of a few companies that release quite large (the largest commonly available size actually) 1/8 scale models in a series of weekly issues over 100 - 110 instalments.  They release different models for different markets and DeAgostini Japan have release the BNR32 Skyline GT-R Nismo last month. I've made two of these 1/8 scale sized cars (one an R35 GT-R from 2012 - 2014, the other I'm just about halfway through, a BNR34 Skyline GT-R from the 2Fast 2Furious movie) so when this R32 was announced there was no way I could ignore it as it's my favourite out of all Nissans.  Each issue costs around $20 so it costs about $2.2K when completed. I suppose it is very expensive for what it is, but the quality and details are really very good, and there are many "gimmicks" like fully functioning exterior and interior lights operated with a remote control, working steering, all doors/bonnet/boot/fuel lid open and close, the side mirrors fold in and it even has a speaker for the engine revving sounds when you turn the lights on.  Each issue comes with a magazine that tells the story of the BNR32 Skyline GT-R Nismo from the first design stages of the BNR32 to Group A homologation and the various racing version that were run in the Japanese Group A and JGTC, and Australian Group A.  So I plan to update the build in this thread 5 issues at a time.  https://deagostini.jp/r32/?srsltid=AfmBOooKjxDc4EUK2rmXqMBPgyHfFJ24s4oEPJBNpnF-lFlsRoW0PE6P
    • As per title.. has anyone used so far? Keen to hear results, comparisons. In the market for a new mani for my new turbo. Any issues cracking?
×
×
  • Create New...