Jump to content
SAU Community

Recommended Posts

When people say the Michelin Pilots are great or bad, are they talking about the Michelin Pilots Sports, or Michelin Pilot Preceda?

And has anyone has experience with the Avon brand of tyres? I see on www.tirerack.com that the Avon Tech M550 A/S "beat" every other brand of tire (ultra performance, all seasons category).

I have Ziex 326 and wanna upgrade to much better ($300-450/corner) tyres, as I'm sick of spinning the wheels in 1st, then 2nd and even third from the lights without even trying! Not even modified either, just exhaust :) Wear isn't so much an issue as I only do about 15K kms a year and it's mostly city driving with the ocassional coast trip (which is all highway anyway, no off road).

haha anything will be better than 326s!

I back falken fk451 or dunlop sp9000, they are both excellent road tyres, but depending on size they are up to 500 per corner.

OK. but didn't really answer the question...

Michelin Preceda or Toyo T1-R will cost me a bit over 400 a corner and lots of ppl have been talking about them so immediately they are ahead compared to any $500 tyre. 1600 i can *kinda* justify, but definitely not 2 grand.

Then again, this site with the Wheels test: http://www.aussiefrogs.com/forum/printthread.php?t=23777

says there is less than 5% difference between all the tyres in the test (5% in what I wonder.. too vague). Anyway, I have just seen the Maxxis Victra MA-V1 in 235/45 R18 for only 209 each @ Bob Janes.. so the Maxxis Victra MA-Z1 couldn't be a whole lot more (even if it was 100 more, that's still only 300 a corner). I would expect about 250-260 each.

Has anyone had experience with these tyres that are supposed to provide comparable performance to several 350-400 buck tyres? Apparently my Falken 326's cost about 200 each.. I find it kinda hard to believe the Maxxis could do so well for so cheap, so I really wanna hear from anyone who has them (and has owned enough tyres to compare fairly).

what size rims rice, the new fedrels are not to bad i have some on the rear, and after the first few weeks they have settled in very well, little spin in first then nothing but hook up in second.

r33 gtst 216rwkw 18 /265/35 the new ones have a lot more silica in them, so before ppl go baggin them there different now

!!! RICE?! ri*N*cewind :P man.. hope most ppl aren't reading it that way lol uh nevermind :) Those who know, know.

Rim size is 235/45 R18. I dunno about the width.. how can u tell by looking? I didn't put them on myself so I dunno.

Quickfit just 5hat on Maxxis from a fair height.. saying they are a long wearing budget tyre (about 40k's instead of 25-30k), that they sacrifice on grip, and that Wheels is a biased magazine and the next magazine on the rack will push some other tyre make/model. He also said that they don't have much experience with them though.

Grr

had falken 326's on the rear... and they were ok in the dry and just death in the wet.. anyways after spinning out just the other day.. i put my foot down and decided to ditch the falkens as they were ABSOLUTE rubbish

replaced them with the same size (245/40/R18) as before but toyo TPG's

paid $540 fitted for the two

and they have worked out allright.. i wouldnt say they are fantastic... but as an upgrade on the falkens they are damn good.. i wanted t1-r's... but found out how expensive they were

i give the toyo tpg's a wet: 6.5/10 and dry 8/10

value for money would get a 8/10

I just got quoted 250 a corner for Maxxis MA-Z1. I can't go past that, seeing how well they did in the magazine road tests (I heard Motor gave them a good review too), for 1K as opposed to 1600, the decision is now all but made!

The fitter said the reason they are so cheap in Australia is cos they've only been in the car tyre market here for about 2.5 years. My mechanic also says they're great, so I'll give em a go.

I just got (after recommendations in this thread) Hankook K104s... unreal tyres, I got:

-255 * 40 * 17 (rears, 9 inch rims)

-235 * 45 * 17 (fronts, 8 inch rims)

Very sticky at the moment... I have a stockish R33 GTS-T, and full throttle out of most corners I have problems spinning them at all, lol, and the rear end is very very stable. Wet weather driving is great too. But coming from Falken Ziex 326s, anything is a huge step up.

Will report back in ~10,000kms anyway.

since they wieght of all skylines are in the 1300 - 1600kg range I reckon the recommendations are pretty relevant. Suspension mods make much more difference to tyre performance that power.

Unless you mean rear traction problems out of big power cars?

Either way, if you buy a sports car, modified or not, buy the best tyres you can afford for it, they make more difference to performance than any other mod.

I had the Toyo T1R for almost 2 weeks which I put them in the front (235/40/18) and in the wet holding is pretty good plus confirdent. Dry is excellent. I am waiting for my rear sets next week (265/35/18). I was told it's better than Yokohama AD07 in the long term usage. You guys reckon it's true?

haha yeah Snowman knows the deal, not that it matters now :P

rincewind was better! LOL

I actually tried to get the personal plates BINKY in Vic but they were taken already.

Anyways.....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Don't do it if your gearbox box has already having syncro issues. The short hifter will put a greater load on them. If you must I remember Nismo did a shorter shifter, with the top part being physically shorter and the part that went into the gearbox was the same as stock. In saying that I've had a C's short shifter (I think) in mine for many years, which was given to me as the previous owner was not sympathetic to the gearbox. Thus forwarned I was careful and had to modify my normal changing style. You have to be super accurate with your clutch and shifts
    • Well, after a week of daily driving and having to crawl out between the wheel and the side intrusion bars. I got myself a quick release setup. I went with an NRG short hub and Quick Release with some cute heart cutouts on the pull tabs. Nice and matchy matchy with the rest of the interior accents I have going on.  The only downside is the total stack height even with the short adapter is longer than the old HKB boss kit. Luckily I had some adjustment left on the column so move the wheel away.
    • stock shifter with new bushes, springs and cup will improve it. Gktech do all the bits. The opinion as the years have gone on is the redline is not great in old gearboxes.
    • Hi all   what short shifter do you use on your skykine r34?   my synchronous does have a problem and i was getting huge delay and grinding sound between 2nd and 3rd, did put shockproof red heavy stuff and it is great now/ no issues   would in your view short shifter screw this up?   people seems to suggest/ use cube short shifter and there is standard and premium. Seen review of premium as much better and less play. Thoughts?
    • Yeah, there's a bit of a density and friability difference between pebbles and any of those other things. Silicone will definitely float in oil and so will be mobile enough to move around. Although, again, if it is upstream of the filter it really shouldn't go any further. I would only ever worry about silicone when it is in places downstream of the filter. Upstream of the pickup is a whole 'nother matter. We've all seen what that does. I have seen the most abominable crap settled out in industrial gearboxes, trunnion lube systems and the like, without any sign that any of it has touched anything in the machine. Just chilling in the bottom, waiting for the inevitable operator error that causes the whole machine to need to be dismantled for repairs.
×
×
  • Create New...