Jump to content
SAU Community

Recommended Posts

I need new tyres for my R33 GTS-4 (non-turbo 4wd).

Current tyres are 225/50/16 Sava Intensa, which seem to give adequate traction for my car.

I can get the same ones (Sava) for around $180each?

Cheaper Nankangs for around $120each

Or something like Goodyear Eagle F1s for $210each

They're the 3 I was told about today anyway.

Any suggestions?

Car is just a daily driver obviously and I want something that has decent grip in the wet too. Current tyres aren't too bad in the wet, it will only slide in the rain if you make it (obviously 4wd makes it harder).

I get $10 off a tyre, so F1s would be $800 fitted and balanced, which is probably the most I would want to spend.

I don't really want to get a cheaper tyre than my current Sava's so probably wont get the Nankangs but might consider the F1s if they are good?

Yeah thats definitely them. They cost good money as well.

I'd have to go with Duncan on the SP-9000's. I also found them an excellent road tyre, and would definatly use them again.

You must have got a bad tyre, incorrect suspension setup or tyre pressures to be unhappy with these.

I'd have to go with Duncan on the SP-9000's.  I also found them an excellent road tyre, and would definatly use them again.

You must have got a bad tyre, incorrect suspension setup or tyre pressures to be unhappy with these.

Hi Scotsman, my wheel alignment was done at East Coast Suspension which is supposed to be good. I have since found out though that I was not entirely fair on the sp9000's as I have never really liked the front end of my car and that was due to the front spring rates not being hard enough, the standard (too hard) bump stops and the whiteline swaybars being incorrectly set. I have had the bars fixed and it has made a big difference but it is bottoming out in the front all the time (only lowered 1 inch). Its not really obvious but you can feel it and it makes the car very nervous on imperfect surfaces (read: sydney roads).

I just need to get the custom springs made up and I have a funny feeling my opinion of the 9000's will change.

Hi all,

Just purchased an r34 GTT sedan, currently on bridgestone import tyres and handles great! Unfortunately I need to buy new tyres and am overwhelmed by the options including width, price etc.

Given that most half decent 225,45,17's start at $225+

Could someone provide some feedback on width?

I am running stock rims and unsure if I would get improved ride/handling by running wider rears? eg. 235 fronts and 245 rears?

Thanks...

I currently have Michelen Primacy, which are top of the range Michellen tyres.. Even tho i have bought second hand tyres, the grip on them is just to good.. They really stick onto the road.. even tho with 50% thread left, im really happy..

Got the primacy on z32 rims, with 215s/55/16s..

Worth checking out the primacy range.. But $$$$..

im digging into my pocket again for two tyre's

i bought some wide ovals for the front and i am happy with them but i cant get over the feel of my car with toyo tpg's on it's so gripy an with lots of rain coming down i dont even worry about slideing. @ $205 for 17's its a bit pricey the toyo 16's only cost me $165 its a big jump in price for one inch bigger rim delemas delemas

Nankang... they've done about 5,000kms, a track day of... "drift" (not overly, more grip sessions, but all 20min sessions and they still look and drive fine) have good grip in wet, and are... relative in the dry. HOWEVER, IMO all problems aside with every tyre I've ever tried is to do with varying power levels, driving conditions and how much abuse they sustain, also, suspension/braking and so on... as you can't really do a back to back test unless taking them to the track of a stack of lap and then comparing etc... SO there are a lot of variables when trying to compare tyres I think.

Cheers

Grant.

Just wanted to put a word in for the Bridgestone S-03s. These have done over 10,000 km on my car now and I just took them to a track day at Queensland Raceway where they did more than 30 laps (5 lap stints).

They're wearing ok (-1.5deg camber on the rear) and probably have about 5000km left in them, maybe more if I rotate them across the rear. They handled the track day well and didn't crap themselves though the front left looks a lot more average now than it did a week ago. :lol:

By lap 5 of each stint they were feeling a bit soggy but that's to be expected with a road tyre I guess.

I cannot say enough for these tyres in the dry, they are just so predictable and grippy. They're not so hot in the wet (sideways in 4th gear on the freeway, anyone?) but I am running about 240-ish rwkw with a 255mm width on the rear so they have their work cut out.

So yes they were freaking expensive but I'm not feeling overly ripped off. Next time I will probably try the Toyo T1Rs or those Revspec things (if I can find them) or maybe the Hankooks, but only if they're significantly cheaper than another set of S-03s. :(

Has anyone tried the S-03 vs something else?

hmm i thought primacy range were top of the list.. they are like 395bucks each tyre.. isnt that expensive..

I also have piolts hx on the fronts.. They are alright tyres as well, but they are getting really old, you can see marks on the tyres..

How much does the sport and the preceda cost?? Do they have more grip than primacy tyres??

hmm i thought primacy range were top of the list.. they are like 395bucks each tyre.. isnt that expensive..

I also have piolts hx on the fronts.. They are alright tyres as well, but they are getting really old, you can see marks on the tyres..

How much does the sport and the preceda cost?? Do they have more grip than primacy tyres??

nope just have a look on the michelin web site if u want more details. they are expensive but pilot sports are even more expensive :P and yes sports would have more grip for sure plus other sporty qualities.

Whoooohoooo :D

Just got my new T1R's on. I got 235/45ZR17 all round but found out i could have gotten 255 on the rear. The d@ckheads who serviced the car previously (before i owned it) had rotated the tyres. They put the 17x8 on the front and the 17x7 on the rear, thought it felt like crap.

Feels good so far but havent really tested them :D

The guy also mentioned that i should get a camber kit as one side is 1.3 and the other 2.

btw - Paying between 250-400 per tyres isn't exp to me, anything over that is though. Heard somone paid approx $800 per corner for pirelli 265/30's on 18 or 19 inch rims, no thats exp

:laugh: and yes sports would have more grip for sure plus other sporty qualities.

FUNNY - how so may I ask?? LOL

Just a point, I ran Pilot Sport for $220 (rear wheel, 17inch) on my Fireblade, and now run Pilot Power ($280). The Power is far superior to the Sport, and the Sport is a model that is around 3yrs old in the motorcycle industry... so maybe the Sport in car tyres is the older model, with Primecy being the latest model?

FUNNY - how so may I ask?? LOL

Just a point, I ran Pilot Sport for $220 (rear wheel, 17inch) on my Fireblade, and now run Pilot Power ($280). The Power is far superior to the Sport, and the Sport is a model that is around 3yrs old in the motorcycle industry... so maybe the Sport in car tyres is the older model, with Primecy being the latest model?

How so? well what i mean by sporty qualities is that they will last longer before turning to mush, grip more, and have stiffer sidewalls that improves grip and steering feel etc etc.

for cars its different, sport is the better one just look at the michelin website if u want to see for yourself :)

About to gat a set of 4 tyres, 235/45/17 for a budget of exactly $200 per corner.

Probably going to go the Hankook 104's for that price.... but what else compares to the 104's in regards to wet weather grip & matching price?

Cheers! :sorcerer:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • In a few years from now, you'll regret that. It'll eat away at you, knowing the truth of the ugly hiding beneath the beautiful exterior... 😛
    • I don't think the G2 profile is particularly dangerous for the engine per se, more just are you actually ok with the turbo lag trade-offs? If the answer is yes then go for it. I personally don't think I'd be ok with it because I spend so much time at lower RPMs and I really enjoy the feeling of being able to stay in 5th gear on the highway and just roll into the throttle to get boost. Or staying in 3rd gear on "gentle canyon cruises" without feeling the turbo lag too badly. The 525 pump should be able to run flat out on factory lines but I would bet the pressure drop from pump to regulator is quite impressive. I don't know how much it would be exactly but I've seen figures like 30 psi thrown around.
    • It's interesting seeing everyone talk about what level of risk they are happy to tolerate.  Building a GTR always has a level of risk, you could be that lucky guy that drops 20k on the engine build alone and still has the thing go pop on the dyno. Life is fun like that.  The way I see it, the thing is a toy to be enjoyed. I'd be happy to turn up the power on stock motor and limit the risk with sensible tuning and engine protection. If it still goes pop, it is what it is. The car isn't a daily driver so it can happily sit while a plan is made to sort it out.  Given this thing will be a street car only, I really feel it's worth the (relatively small if managed well) risk to turn the power up to around 350KW on e85.  I don't think anyone getting into the skyline game now is doing it out of logic. Surely it is a purely emotional decision so I'm not sure how important it is to think about the engine build logically. The heart wants what it wants.  @joshuaho96 little note for Josh, I run my 525 pump flat out all the time and through the factory lines without any issues. (excluding the melting connectors, that's sorted now. we'll pretend it never happened lol)
    • But the Nexus S3 is very expensive and won't be as purpose-built for the application as a separate electronic boost controller :^) More seriously my pet issue here would be that the Walbro 525 running at 100% duty cycle is going to require more FPR than the stock setup can handle. I'm also pretty sure from what I've seen elsewhere you might want to slow down the pump regardless unless you're going to come up with some way of upsizing the fuel lines coming from the fuel tank. Factory 8mm fuel line doesn't actually flow very much if you want to keep pressure drop down between the fuel pump outlet and FPR. If you really want to "keep it simple" I would run only as much pump as you need and source a fuel pump controller to slow down the pump in the vain hope of being able to run stock-style FPRs which are pretty dinky. Or just use the HICAS lines and it should be mostly fine. OP should also really think hard about what profile they'd want out of the turbo. My pet choice here would be the G1 profile rather than anything higher power but YMMV. I already think ~stock turbo lag is pretty bad so I don't want to make it worse. In "gentle canyon cruising" I found that I spent a lot of time around 4-4.5k RPM. I also recommend DIYing labor if you're detail-oriented enough. Costs are high for labor + if you do it yourself you can be your own quality control.
    • GTSBoy is again on the money. My actual advice? Sell the car. (really). For what it's worth as is, you can sidegrade into something much better. If you care about function then this is the actual move. If you want a Skyline to perform, set aside about $100K to do it. This is NOT a typo. You will see right away these are two very different mindsets. Realistically we're talking full restomod for any Skyline still kicking around. Have an honest think about which one you are.. and what you want to do, and how much you want to invest in this (with no return).
×
×
  • Create New...