Jump to content
SAU Community

Interest: Cruise 10pm Thurs 2nd Jan

Boostzor

By Boostzor,
in Western Australia

 Share

Recommended Posts

PSIKO Mentor

PSIKO

Posted
Posted
Originally posted by bully

sounds good we need to do zig zag up the hills

are you referring to the kalamunda gooseberry hill? It's a downhill one lane st with a sheer drop about 2" next to you so we'd better go downhill in case people are coming the opposite way hahahah :bahaha:

but yeah that's a WIKID road

you still not got your car kym?? doh! well I'm sure they're doing their best...you got in contact with them about it to find out when it'll be available? good luck :P

ix9 Grand Master

ix9

Posted
Posted
Originally posted by PSIKO

are you referring to the kalamunda gooseberry hill? It's a downhill one lane st with a sheer drop about 2" next to you so we'd better go downhill in case people are coming the opposite way hahahah :bahaha:  

but yeah that's a WIKID road

you still not got your car kym?? doh! well I'm sure they're doing their best...you got in contact with them about it to find out when it'll be available? good luck :P

Haven't got my car yet *snif* but yeh, that's the hill we're talking about.. gooseberry hill/kalamunda...dont think we'll make it a night cruise tho... might get a bit hairy hey...

long live teh zig zag! all will be welcome again, like before... should be in a few weeks im guessing, when i get my car back anyway.. so we'll let ya know... :)

PSIKO Mentor

PSIKO

Posted
Posted

I've got a pretty boring vid of going down there...

conclusion - going down it at nighttime with v dark tint is not advised!!

some very close corners where I couldn't quite see what was going on made me change underwear a couple of times...but made it out alive! :burnout:

but once you hit the whatever hwy down the bottom, that's where the fun lies!!

PSIKO Mentor

PSIKO

Posted
Posted
Originally posted by Hicks

The last r.i.c.e cruise was f#ckin sweet. Loved that street with the little slow down bends in it. :D  

I'll be up for a cruise, anywhere, day or night.

Looks like its the accent for the weekend, Kym.

yeah it's sweet hey, two roads down from my house, gotta love a cruise of claremont then home along there every night :rolleyes:

PSIKO Mentor

PSIKO

Posted
Posted
Originally posted by Pva_Glue

I was keeping up with PSIKO for while until I met the corner...:lol:

I almost shat me self there and looking rear view mirror Kym was Braking hard... hahahah :rolleyes:

yeah it was fun night!

cheers

Joe

?? on davis road?? that'd be coz everyone in front of me was going same speed as all of us :D

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • eli995
      NPboosted manifold fitting purpose

      By eli995 · Posted

      Ok gotcha, so one post to fpr  another to bov  and I have the mishimoto boost controller and a link g4+ so I’d just have the tuner set it up properly. For the last two from plenum post throttle to  ecu/ boost controller, I know that I have a hose coming from the ecu that I was confused about so I assume that’s what connect to the boost controller from the ecu? And then the last is just from plenum to boost controller then to wastegate?
    • eli995
      NPboosted manifold fitting purpose

      By eli995 · Posted

    • Duncan
      Neil's R33 Gts-t Build

      By Duncan · Posted

      From there, it was just a quick electrical check, prime the oil and start her up Which, is not what happened. 1. Bloody seppo Aeropro battery holder. Not only was it too tall for the battery (which I'll forgive them for, I have another battery the same nominal size that is taller than Neil's one, but the bracket is a fixed height so the battery was spaced up) But the thing that really shits me is the hardware to hold it on requires a 7/32 Hex key. WTF. No-one will ever be able to remove or install the damn thing without a hex key they don't own 2. Kill switch no longer worked once the console was installed. Neil mentioned above he had to adjust the length but it no longer cleared the console once installed. Sorted. 3. Suspiciously, the brake light holders were hanging in the boot with no globes. Sure enough the stopper on the brake pedal was missing so they are always on unless the kill switch is activated. Will pick one up tomorrow (turns out 32 and 33 don't use the same stopper) 4. All that sorted, I turned on the kill switch, turned the key to ACC. Nothing. Turned it to IGN. Nothing. Checked some fuses and found the main IGN in the boot was missing which improved things once it was replaced. Now ECU and dash lights turn on with IGN but still no fuel pump. 5. Turned it to Start....ECU on, no fuel pump, no starter. Plus the voltage dropped straight to 9v.  I suspect the starter is f**ked but am going to have to work through it all and see what is happening, really looks like more than one issue. Does anyone have the R33 fuse box key with the circuit it sources from (eg BAT, ACC, IGN, SRT etc) and supplies? I can find a translated list showing Amps and circuit without supply circuit, and I can find supply circuit without Amps and target circuit.
    • Duncan
      Neil's R33 Gts-t Build

      By Duncan · Posted

      3rd time lucky, the AAC is now all plumbed up after getting some final fittings All set up under the plenum of maximum access
    • Duncan
      Neil's R33 Gts-t Build

      By Duncan · Posted

      OK, so the weight has been bugging because it was really low. I did it again today and got a more believable answer at 1246 without driver And with a 93kg driver I'm pretty sure the car was still slightly on the quickjack last time meaning the full weight was not on the scales  
×
×
  • Create New...