Jump to content
SAU Community

Part Number For R32 Gtst Ecu, Please Help *urgent* Car Wont Start!!

bretto

By bretto,
in Engines & Forced Induction

 Share

Recommended Posts

bretto Proficient

bretto

Posted
Posted

Hi ppls

Ive been putting my car back together for a while now. Now that it is together, the damn thing wont start, we put new spark plugs in it last night and it doesnt seem to be getting any fuel, fuel pump is working but the injectors dont seem to be working at all. I need to check that i have an r32 gtst computer and not some random the fella i bought the car off picked up at the wreckers. So if anyone can help with a part number that would be greatly appreciated.

The codes written on the side of the ecu are MEC-R212 B 1X22 Those are on the front on a nissan tag. Also on the side is MEC-R212 B 06645

We pulled the spark plugs out and after trying numourous times to start it they were dry and had no signs of any fuel getting to them, also when we were trying to start the car and feeling the injectors you couldnt feel them pulsing whereas my mates car was very noticable, thats why we are guessing its the injectors.

Thanks guys.....Brett

bretto Proficient

bretto

Posted
  • Author
Posted

yeah im pretty sure the lines are on the right way, we pulled the line off to make sure there was fuel being pumped through. wouldnt the injectors still be pulsing to try pump fuel into the engine even if there wasnt any fuel there? coz they definitely arnt doing anything.

blind_elk Grand Master

blind_elk

Posted
Posted

One of the green relays down behind the ECU controls power to the injectors. Make sure that both relays (the other is for the coils) are switching on when you set the key to "ON".

Trace the fuel line from the FPR back towards the the fuel tank. If you run into the fuel filter, then the fuel lines are on the wrong way round. But that shouldn't stop the injectors pulsing.

While you had the plugs out, did you check that you had spark?

I have on old ECU, but its from a GTS4. The Nissan P/N is 23710 04U60 (It has MEC-116 A 9810 just above the "Hitachi" on the label)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • jtha7
      Replacing turbo water line - any recommendations or advice?

      By jtha7 · Posted

      Hi all, Restoring r33 series 1 rb25det. All the heater hoses were on their way out, have replaced them and put it all back together. After testing I noticed a small leak from behind the head on the actual metal water line to the turbo when cars warm. I tried running a longer hose over it but it kept leaking...   I am about to take the (stock) manifold off again😔 to change the water line does any one have any lines they recommend? I was looking at Aeroflow Turbo Oil & Water Line Set but not sure what everyone else recommends. Car is completely stock but want to upgrade turbo eventually. it looks like ill have to disconnect a lot just to replace these lines so if there's anything else recommended to do please let me know. Thank you in advance!
    • MBS206
      RB20DE NEO smallbox clutch.

      By MBS206 · Posted

      From memory, on the R33 GTSt at least, while everyone says "It's not adjustable", I found when I changed clutches in mine, it just needed a small adjustment on the rod length. But be very wary here, as you could end up trying to push the pushrod in the master too far, or blowing out the slave.   Most likely though, if the master/slave isn't bypassing internally or leaking out, then the throw out is the wrong height compared to the fingers on the clutch, so when it moves to disengage the clutch, it isn't 100% disengaged. You can check part of this out too by jacking the car up, having the engine running, put your foot on the clutch and try to engage 1st gear. If it goes in pretty easy (Compared to the ground) and/or the wheels start turning a fair bit and it takes a bit too much brake pedal to bring them back to a stop, this is likely the issue.  I'm not sure if you can adjust the height of the forks etc in these though, it's been that long since I've touched any RB gearbox.
    • MBS206
      Lock up the old for sale / wtb threads.

      By MBS206 · Posted

      That's all good, I thought I was missing some interesting feature! Maybe @PranK can double check if that is something that is meant to be operating or not.
    • Kapr
      RB20DE NEO smallbox clutch.

      By Kapr · Posted

      I hope that is not something that bad. From what i remember he said that only first gear is "hard" to get in and that he has couple of ideas what to try next but idk 😕  hope it is not gearbox out. I will let you know.
    • GTSBoy
      RB20DE NEO smallbox clutch.

      By GTSBoy · Posted

      If it's not the hydraulics, it is probably gearbox back out. Usually as per @Duncan's post, or otherwise associated with not getting the throwout fork positioned correctly. All the way up to catastrophically bolting shit back together without it being aligned properly and wrecking the clutch/input shaft/flywheel/something else.
×
×
  • Create New...