Jump to content
SAU Community

Recommended Posts

I was wondering if you guys know of anywhere on the northside to go for a wheel alignment on my R33 it has the Hicas and didn't know if this would cause problems for most places?

i did a search and i found that some people recomended bob jane at toombul?

I appreciate any input anyone has that has had a wheel alignment at a particular shop. how much did it cost also... :)

Cheers,

Danno.

:)

There are only 2 places you can trust to do a perfect job every time, they are:

Fulcrum Suspensions (talk to Barry)

46 Webster Road,

STAFFORD 4053, Queensland, Australia

Ph: 3356 6733

Leda Suspension Services (talk to Bruce)

Unit 5, Cnr Johnstone Rd & Belconnen Crs Brendale QLD 4500

ph: (07) 3205 3165

Cost @95.00 for a 4 wheel alignment.

Never tried them so I cant comment Spooks, but I can say Bob Jane _CANT_ do it. They claim to be able to do 4WS, but HICAS is different to the Honda-style 4WS and they get confuddled I think. Fulcrum explained it all properly, but I forgot all the terminology they used. And besides, the words were big and scary.

dammit I got one done on the weekend and didn't even think about the 4ws! why would the HICAS need aligning though, they only move a tiny amount. Wouldn't diagnostic mode take care of this? if they were out of alignment wouldn't the HICAS light be on?

I just leave the rear alone. If the light comes on I get Fulcrum to do it. Bob Jane can do the front but they should not be let near the HICAS!!

Dave

I use Quickfit at Yerongpilly...

They do the 4, they also do alot of Club work incl scrutineering and suspension set up so they know what they are doing, well the 1 bloke I let do it does!!!

Ask for Jason if that is your side of town. I drive from Aspley to there to get it done...

I'm booked into Fulcrum tomorrow, for a 4 wheel alignment and balance... as i'm not happy with the job that Bob Jane did about 1000km ago... i'll let you know how it goes... (Caution, they're rather expensive... got quoted $120 for just the above)

I'm booked into Fulcrum tomorrow, for a 4 wheel alignment and balance... as i'm not happy with the job that Bob Jane did about 1000km ago... i'll let you know how it goes... (Caution, they're rather expensive... got quoted $120 for just the above)

I had my car done there just recently....best wheel agliment I ever got.

You pay for what you get here but its quality

GDam! Nice car! Been awhile since ive had to look twice :)

Got any more pics/info?

Theres some pictures in MY Gallery, you can check them out.

The engine mods are as follows:

RB26 ENGINE

HKS 88MM FORGED PISTONS

HKS CON RODS

HKS STEP 2 280 CAMSHAFTS

HKS CAM GEARS

HKS 1.6MM HEADGASKET

JUN OIL PUMP

PERFORMANCE METALCRAFT 8L FULL RACING SUMP

PORTED HEAD

NISMO BEARINGS

NISMO CAMBELT

AUTRONIC SMC AND LOOM

1000CC INJECTORS

BLITZ FUEL RAIL

MALPASSI FUEL REG

SPLITFIRE COIL PACKS

GARRET BALL BEARING TURBO(NEW T04Z) - RACEPACE CUSTOM

RACEPACE CUSTOM EXHAUST MANIFOLD

TRUST EXTERNAL WASTEGATE

NISMO G-MAX TWIN PLATE CLUTCH

HKS GT SPEC DRAG INTERCOOLER

CUSTOM FUEL SWIRL POT - TWIN OUTLETS FED BY GTR FUEL PUMP

2 X BOSCH 044 EXTERNAL FUEL PUMPS

HKS OIL COOLER KIT

TRUST EXHAUST 3"

ARC ALLOY RADIATOR

ARC OIL CATCH TANK

HKS EVC4

CURRENTLY MAKING 417KW@THE WHEELS AT 1.3 BAR

WAS MAKING OVER 500KW WITH PREVIOUSLY FITTED HKS T51R

The engine mods are as follows:

RB26 ENGINE

HKS 88MM FORGED PISTONS

HKS CON RODS

HKS STEP 2 280 CAMSHAFTS

HKS CAM GEARS

HKS 1.6MM HEADGASKET

JUN OIL PUMP

PERFORMANCE METALCRAFT 8L FULL RACING SUMP

PORTED HEAD

NISMO BEARINGS

NISMO CAMBELT

AUTRONIC SMC AND LOOM

1000CC INJECTORS

BLITZ FUEL RAIL

MALPASSI FUEL REG

SPLITFIRE COIL PACKS

GARRET BALL BEARING TURBO(NEW T04Z) - RACEPACE CUSTOM

RACEPACE CUSTOM EXHAUST MANIFOLD

TRUST EXTERNAL WASTEGATE

NISMO G-MAX TWIN PLATE CLUTCH

HKS GT SPEC DRAG INTERCOOLER

CUSTOM FUEL SWIRL POT - TWIN OUTLETS FED BY GTR FUEL PUMP

2 X BOSCH 044 EXTERNAL FUEL PUMPS

HKS OIL COOLER KIT

TRUST EXHAUST 3"

ARC ALLOY RADIATOR

ARC OIL CATCH TANK

HKS EVC4

CURRENTLY MAKING 417KW@THE WHEELS AT 1.3 BAR

WAS MAKING OVER 500KW WITH PREVIOUSLY FITTED HKS T51R

Yeah.... that el do...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I don't know for sure, but I'd expect them all to be interchangeable given the diff end and hub end don't move/change between any C34 series. Often Nissan will change part numbers and the aftermarket follows those year ranges; but the original part number change doesn't mean other parts won't fit. The change could be a change in material, internal parts or even just supplier. For example, all the RB gearbox to engine bolts are no longer available and there is a new part number instead. The only change is they went from cadmium plated bolts to zinc plated due to the issues manufacturing with Cadmium. They look different but work the same.
    • One year is a bit concerning. Did you try contacting GSP? It says 5 year warranty on the box if I remember correctly. I'm also running their driveshafts on my S2 Stagea.   You could check the part numbers on Amayama for your year. Here's the link for my 1998 which gives the 39100-23U60 part number. Well, that and 39100-23U70. https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6649-rb25det/trans/391 What does it say for yours?
    • I ordered a GSP Front R/H Axle from here - https://justjap.com/products/gsp-premium-front-driveshaft-r-h-nissan-r32-r33-r34-skyline-gtr-stagea-4wd#description It lasted around a year before one of the boots blew out. I'm lowered, but I have GKTech roll center adjusters. One year seems a little premature. I think I'm going to spend the extra money on an OEM cv axle this time. This website - https://tfaspeed.com/collections/nissan-stagea-wgnc34-x-four-parts/products/nissan-stagea-awc34-260rs-rb26-right-front-axle-drive-assembly Makes it sound like the readily available OEM CV axle will only fit 11.1999 Stagea and up (mine is a 2.1997 S1). The JustJap listing didn't mention any years or anything for the GSP axle. Amayama shows '11.1999' and up as well for that part number. As well as 'plastic boot type'. See attached picture. So I guess my question is, does that axle (39100-23U60) really only fit S2 Stagea? It's the front driver side. If it does, I'd love to buy that instead of rolling the dice on another GSP. I've found that OEM one cheaper here: https://www.partsfornissans.com/oem-parts/nismo-jdm-r32-r33-r34-skyline-gtr-r32-gts4-right-front-axle-3910023u60 and here https://www.nissanparts.cc/oem-parts/nismo-shaft-ft-drive-3910023u60 Just a little confused because the JapSpeed listing for the GSP front driver axle doesn't mention any specific years or anything and it fit my S1 Stagea fine. So will 39100-23U60 fit my S1 Stagea even though technically it says '11.1999' and up? What would have changed? Thanks.  
    • Thanks for the info. The only "Issue" I've had with the shifter is I always found the throw between 4th and 6th gear too close. I'm always worried to shift into 4th accidently and sending my motor to the moon. Adam LZ recently came out with a video and stated Serialnine revised their shifters to correct this and will change all the revised parts for 150$. Strangely enough, I contacted Serialnine right after and they denied it and said it's bullshit. I found that strange as he's a distributer. I'll keep this forum post updated on that saga.
    • Yep that is correct. It allows you to adjust the short throw range from what I can tell
×
×
  • Create New...