Jump to content
SAU Community

Recommended Posts

Just replaced mine (32 gts-t)

DBA slotted were quoted around $200 a disc... I was thinking this was going to be costly exercise but needed it done as my rotors were warped from when the car was imported.

I ended up with ventilated Brembo's for $65 each! (new). I replaced the front rotors only and put new brake pads on. Works a treat.

Link to comment
https://www.sau.com.au/forums/topic/73299-new-rotors-r32/#findComment-1356783
Share on other sites

thanks guys, this is what i was after, i bought a set of DBA slotted rotors for the hr30 about 18 months ago and they were 340 each, the first set they had made for a r30 skyline, i've now upgraded the fronts to r32 gts-t's 4 pots and rotors and was hoping that new rotors would be alot cheaper.

DBA will make a set of r32 rotors in the 4x114.3 for a bit more $$ wont they?

Link to comment
https://www.sau.com.au/forums/topic/73299-new-rotors-r32/#findComment-1356876
Share on other sites

thanks guys, this is what i was after, i bought a set of DBA slotted rotors for the hr30 about 18 months ago and they were 340 each, the first set they had made for a r30 skyline, i've now upgraded the fronts to r32 gts-t's 4 pots and  rotors and was hoping that new rotors would be alot cheaper.  

DBA will make a set of r32 rotors in the 4x114.3 for a bit more $$ wont they?

Is it hard to replace front rotors, and is there instructions online?

Thanks

al

Link to comment
https://www.sau.com.au/forums/topic/73299-new-rotors-r32/#findComment-1364729
Share on other sites

I put DBA rotors on the front and some protec cheapy's on the rear as I was unable to soruce DBA rear rotors for the R32 anywhere in Adelaide. :)

From memory the front DBA rotors varied in price massively.

Cheapest place to buy DBA rotors from In Adelaide are Motor Mates.

Where did you source yours from Pablo?

Link to comment
https://www.sau.com.au/forums/topic/73299-new-rotors-r32/#findComment-1365047
Share on other sites

ended up getting quotes, from autobarn for DBAs and glodal auto spares for RDA,

the fronts with DBA were 325 slotted and with RDA it was 283 for the slotted, the biggest difference was the rears for my hr30 were 269 for the DBAs' and 135 for the RDAs' both slotted

Link to comment
https://www.sau.com.au/forums/topic/73299-new-rotors-r32/#findComment-1365288
Share on other sites

It seams the smaller houses will get these parts cheaper as they want you to ome back and use their services, so shop around. Perth Brakes Australia is one of the bigest suspension and brake places in WA and they wanted $2656 for each rotor. HA? So go see if there are garages that tune and race their cars as they will be more connected with manufacturers and sponsors at the same time.

Al

Link to comment
https://www.sau.com.au/forums/topic/73299-new-rotors-r32/#findComment-1365361
Share on other sites

Just replaced mine (32 gts-t)

DBA slotted were quoted around $200 a disc...  I was thinking this was going to be costly exercise but needed it done as my rotors were warped from when the car was imported.

I ended up with ventilated Brembo's for $65 each! (new).  I replaced the front rotors only and put new brake pads on.  Works a treat.

$65? what the? where from mate?

Link to comment
https://www.sau.com.au/forums/topic/73299-new-rotors-r32/#findComment-1378375
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah - My key still does the chime thing. I followed the procedure but it didn't activate on the (identical) third set of keyfob that I had. I vaguely remember the alarm saying you can only pair two keys with it. Now that I've dug it up, it appears that you very much can pair keyfobs to the alarm system. (which are the fobs I use to unlock the car). I have successfully diverted the thread and can probably not use the OEM keyfob ever again unless I use the aftermarket alarm and attempt to pair the OEM keyfob to it. Which might just work, or not :D. I definitely used the nissan method and not the aftermarket alarm method.
    • What makes it worse is that Nissan made keys in the same style, for example R34 and Stagea, but they work at different frequencies or something like that. So they look the same but the remotes are not interchangeable. I learned that from some guy selling aftermarket blank keys.
    • Does your door chime work when you have the key in the lock and open the door? I've had that disabled because it's f**king annoying and it is one thing that messes with the pairing. Because now the car doesn't detect key in ignition anymore and the slide-key-in-and-out sequence does not trigger the pairing mode anymore. The service manual has a section on the various bits involved in doing the syncing. I presume it'll be similar between Stagea and R34.
    • Agree, but meh, I think is is based more on LOLS than actually apples to apples, like, who would have thunk a turbo 4 cylinder would not beat a NA 4 cylinder  I think with just basic N/A mods, like a exhaust and tune, it would be equal to the Mini in its current form, maybe I know my current 2.5 would "chop the mini" as the midrange now has a night and day difference in power delivery compared to the tuned 2.0, by around 20kwatw and 30nm from around 2k rpm "ish"....... I'm kinda hoping that they do a N/A build, either with the MZR 2.0 or with whatever they decide to use If I recall correctly they did talk about K swapping one a while ago
    • Can't see that being a thing.
×
×
  • Create New...