Jump to content
SAU Community

Recommended Posts

hi there,

im from NZ and happened to come across your site and find it really interesting that you all know this much stuff. Now im a noob at this but im looking at dropping my 98 R34 with King lows and putting a set of 19" Eurohart C Form from Racing Hart on it. they are 9 on the back with 275x35.19" tyres and 8 on the front with 235x35.19".....you guys know ur stuff so do u think this would be ok? any problems that i may find, im in the process of doing it up now it has a C West wing at the mo and when i get the wheels and springs i think i will then look later on at maybe a bomex body kit.

What do you think?

btw: you guys have harsh rules but man your rides are phat :)

Link to comment
https://www.sau.com.au/forums/topic/73384-typical-kiwi/
Share on other sites

wiked ride IanH....that car is smokin, so 265 would be better didn't know about that speedo thing thnx man.

thnx RHETT yeah, i found that place too but i couldn't find as much knowledge and info as i have seen in your forums, so ill probly stick around here a bit, i am lookin at different mags today so hope to have something rollin on my car soon but ill show pics :)

i have tiptronic, still drifts ok though, have a boost tap but the car doesnt like going over 1 bar...is that a problem? how can i fix it? and i may look at Tein platforms....are these ok shocks for the R34? instead of kings?or should i stick with the kings? man i really appreciate your feedback guys ;) maybe i could catch up with some of you when im in oz around Sept..Oct

Link to comment
https://www.sau.com.au/forums/topic/73384-typical-kiwi/#findComment-1348578
Share on other sites

are you sure 19" could fit? over the weekend i had to do a suspension check since petrolium jelly started to ooze out of the front right suspension arm joint..eek :rofl: however since the wheel was off ithought i might try and see if the old supra 20" rims would fit, stud pattern is the same however the wheel would of never have fit with the nissan suspension strut coming out and over the wheel with only about an inch clearence with the old stock 17" wheel. I beleived that 18" was as high as you could go......am i wrong?

Link to comment
https://www.sau.com.au/forums/topic/73384-typical-kiwi/#findComment-1348691
Share on other sites

It doesn't like going over 1 bar because the stock turbo should not be boosting anywhere near that level. It is absolutely at its maximum efficiency at 12psi. You should lower the boost to 12psi and you will find you will make the same power, smoother and no more boost/fuel cuts.

Link to comment
https://www.sau.com.au/forums/topic/73384-typical-kiwi/#findComment-1348795
Share on other sites

Hey RyanN yeah, they seemed aiight to me, i had them on this morning but not lowered and it seemed to be ok, the guy at the mag shop hasn't said it wouldn't work with that set up, he was the one that suggested it so i hope it will be fine :rant: else i will have to look at some 18's if i must cause i want it lower...but couldn't i just take that plastic stuff thats inside the wheels arches out aswell or is it best left on?

as for your advice on boost NJR thanx man, it seems to like it at 12 so i think ill leave it there, with my new wheels on anyway i doubt im gonna want to burn much rubber hahaha

i got a pic with them on for u 2 look at and give me an opinion if you like on what you reckon....the 3rd pic is sumthing i put on to see if bling was the thing, so let me know if u like them

Link to comment
https://www.sau.com.au/forums/topic/73384-typical-kiwi/#findComment-1349693
Share on other sites

Got them on my car.....man im stoked it looks bloody good :rofl: nice 19's and king low's, now all i need is the body kit but thats $2k away so ill wait on that, next is a Bomex front and carbon fibre bonnet, i also got a carbon fibre GT wing with the wheels and low kit....geez what a nice gf i have hehehehe......ill have to get it fixed to the car soon and sell my C-West wing now hehehehe, pics will be up tomorrow when i get the camera out, its raining here so no time......is there a place on these forums that peeps show off their rides? cause i luv my R34..... :D

Link to comment
https://www.sau.com.au/forums/topic/73384-typical-kiwi/#findComment-1357504
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha yea it's a bit of a weird setup at the moment, just wanted to make sure I sorted out any headaches before dyno day. At the moment I've changed the exhaust manifold, turbo and downpipe, 460lph fuel pump and rising rate reg as well as the previously mentioned headstuds and gasket. The nistune was already mapped for the car as it was and drove around for a few months no worries. The plan is to run flex fuel hence the big pump, which I've wired direct to the battery through a relay to avoid voltage issues.
    • Um. Was the ECU the same as the one previously there? I know R33's needed R32 GTST ECU's or other tomfoolery to run Nistune. This is such a wild setup. Most people would plumb in the turbo then not drive the car (i.e tow it to a tuner). What's actually changed since it last ran?
    • I'm a bit stuck with this one fellas, I recently decided to undertake a turbo conversion on my GTS-4, ended up pulling the motor to replace all the seals and do an mls head gasket and arp head studs while I was at it. Everything has gone according to plan, no oil or coolant leaks, compression checked out, and decided to give it a test before I book it in for a tune As it stands right now, the turbo only has oil lines plumbed so that I don't put boost into my untuned engine, and I'm using the factory GTS-T crossover pipe with a maf and poddy as a temporary intake. The car starts with relative ease and idles amazingly, however as the title suggests it really doesn't want to rev up, runs very smooth but almost feels choked out and unresponsive to the throttle, almost like it's running lean or something? I've triple checked my vacuum lines and timing with a timing light, injectors haven't been touched as of yet to avoid flooding the engine and worked perfectly beforehand, new plugs and coilpacks, I've even unbolted the cat just to see if it spontaneously collapsed, no dice The car currently has a nistune r32 gtst ecu installed so I have no way to check for fault codes. At this point I'm a bit stumped. Is this normal behaviour for a car with a turbo bolted onto the exhaust going nowhere? I'd imagine the turbo wouldn't cause this much restriction in the exhaust without the boost going through the intake. Any ideas? If necessary I can link a video of how it responds to full throttle while in neutral.  
    • Insert tab A into slot B?
    • Instructions seem simple enough to understand.....
×
×
  • Create New...