Jump to content
SAU Community

Recommended Posts

V Spec stands for Victory Spec.

R33s badged with V-spec have slightly more torque - I don't know how they got it though.

I think the R32s have an LSD system - which is the same as the racing fellows used.

The R34s badged as V-spec have stiffer suspention. Btw are all R34s V-spec?

Correct me if I'm wrong on any of that, guys.

Link to comment
https://www.sau.com.au/forums/topic/73566-what-is-v-spec/#findComment-1351339
Share on other sites

there are no practical differences between the vspec I, II and regular models. For the extra you would pay for a vspec you can buy the same or better brakes, they bolt straight on. The other key difference in vspec II is the standard rim size but of course everyone changes them anyway.

Don't bother, buy the regular model and do the mods you want. All the key things are the same, engine, Atessa/4wd, abs, suspension etc etc etc

Link to comment
https://www.sau.com.au/forums/topic/73566-what-is-v-spec/#findComment-1359846
Share on other sites

The V-Specs received the ATTESA E-TS PRO system rather than the standard ATTESA E-TS. This PRO system allows for driving and braking forces at all four wheels independently rather then just front and rear. Therefore making the V-Spec are more suited to track than standard GTRs.

Link to comment
https://www.sau.com.au/forums/topic/73566-what-is-v-spec/#findComment-1359871
Share on other sites

The V-Specs received the ATTESA E-TS PRO system rather than the standard ATTESA E-TS. This PRO system allows for driving and braking forces at all four wheels independently rather then just front and rear. Therefore making the V-Spec are more suited to track than standard GTRs.

not in the R32 I'm afraid :P Yes the 33 and 34s have different ATESSA systems, the vspec being faster and better calibrated ;)

Re the ABS "independant braking force at all wheels" the 32 has 3 channel ABS (front left, front right and rear) while the 33 and 34 have 4 channel ABS (each wheel independant)

Link to comment
https://www.sau.com.au/forums/topic/73566-what-is-v-spec/#findComment-1359882
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Which is why I didn't mention that hardness testing, and specifically mentioned the bore and deck thickness testing. Yeah, not really. The bore temperature will be a lot more even around the top half inch or so, where the material distribution is dominated by the deck, and which is the only place where the bore surface temperature heating any gas in the cylinder is likely to have any effect on detonation. Think about it. Another inch or so down the bore, you might have a hotter spot. The gas there might get a bit hotter, then the piston rises squeezes that gas away from there at high speed and mixes it with other gas from nearby. Instant dilution of the problem. I'd be surprised if it was an issue at any time other than in racing engines or OEM dev engines being run at the ragged edge of tuning. Say what now?
    • https://dsportmag.com/the-tech/education/engine-tech-material-hardness-testing/ The PRP testing on block hardness I'm not sure how much it actually can be trusted. The thinner cylinder walls on RBs is a bit of a problem vs 2JZ but it really depends on the design goal. Siamesed cylinder bores like a 2JZ cause uneven cylinder wall temps too, which means a bit of distortion induced by that + the hotspot can affect knock margin. Something that actually gives me a bit of pause with the PRP block, whether super thick cylinder walls are going to keep it from being drop-in compatible on an otherwise OEM rebuild. 
    • Yeah very valid point. I am waiting for one of the other tuners to come back from vacation so he can help me a bit when the cat is installed again. In the meantime I am going to finish up my polishing and ceramic coating that I have started myself.    N45 Dr Beasley product is highly recommended for a paint primer / polisher. Using this EXO Gtechniq also for the ceramic but next time might use the light serum before hand also. Looks great. 
    • Running rich in conditions where it shouldn't probably won't do great things for catalytic converter lifespan. I would fix that sooner than later.
    • Yes, important point. Watch the Motive videos with Herman thickness testing the bores and deck. You do not want to push the unlucky (thin) block as hard as you can push the average block.
×
×
  • Create New...