WTB: intercooler plumbing for a front mount

[66 skyline gt]

hey guys i am after some old front mount intercooler plumbing for my old skool project. 2 1/2 to 3 inch if possible.... doesnt matter if its ally or steel, can work with either. Need it to go where the standard rb20det plumbing meets the turbo and plenium.....

Any help much appreciated......

[66 skyline gt]

*bump*

[jager]

i have a standard cooler pipe from my 33 any help???

prob not

[66 skyline gt]

any chances of some photo's if possible.............. it would be greatly appreciated

[steve_R32]

Seriously, it is not hard to weld up some pipe to mount any sort of intercooler, FMIC or the STD side Front mount of any R32/R33/R34.

2 1/2" exhaust pipe costs fark all, I still have a section of straight just under 2 metres length if you need some. You can buy manrell bends in the same diametre for not much from most exhaust shops, then you just work out where the bends need be, cut, tape together, get welded (or weld yourself)...easy:)

When I put the GTR R32 FMIC into my R32 GTS-t skyline (The GTR intercooler is 3" and the std gtst plumbing is 2 1/2" plumbing, I Got 2 1/2 to 3 " reducers from Morphett Vale Exhaust for fark all, and welded to suit. Might not have been pretty, but it worked

Just an Idea for you,

Steve

[66 skyline gt]

cheers for that will give it a go........

[danieltangtc]

try ebay