Jump to content
SAU Community

Recommended Posts

  • Replies 60
  • Created
  • Last Reply

Top Posters In This Topic

Im guessing that the 26 and 25 have the same firing order?#

Other wise, cams, 6 throttle bodies would have a big impact, and exhaust manifold design... Are the valve sizes the same on the 25 & 26? I dont think solid lifters would have an effect on exhaust sound, apart from the cam differences. I had an SR with different turbo/exhaust manifold and sounded much different from any sr i heard before, very raspy and much tougher....

I think that the only way a 25 or an rb for that matter could sound like a commodore would be if it was non-turbo... But ive never heard a turbo rb make the fart like sound of the old 202, or any of the v6's.

i reckon the rb20 sounds better than the rb25, sr20 or CA18 - I havent heard the RB26 enough times to know but I expect it would sound different and better

Think so? The RB20 sounds like a tinny version of the 25. (I used to own a 32 GTS-T)

the rb30e may sound shitter, but the rb25/30 hybrid has got its own sound. Id say the rb20 sounds like a car with a fat exhaust note - more noise than HP, then the rb25 sounds a bit gutsier, rb26 sounds different again (id say due to all previos things mentioned).

The rb30 has a very deep rumble note. I dropped it in my car changing nothing else but the engine, and it sounds like the rb20 did, but with a better rumble...like its talking the talk now its walking the walk ;)

if you put a rb26 head on a rb30 and leave all the support gear ie turbo, manifolds, exhaust and inlet they sound the same.... the acoustics of the engine come from the valvetrain and head design as mentioned in the ducatti analogy, its all to do with the head design.... rb30 single cam engines sound crap cause of the shit head they are running!!!! The rb20 and 26 use the same head casting but very different set ups and the reasone an rb20 sounds different to a rb25 that has the same valve train set up is the camber circumferance is only 77mm not 86 thus the rb25 has a deeper note.....

Since converting the RB25 to a GTR34 twin turbo setup, the difference is in the fact that the 2 turbos separate the pulse of the front and rear 3 cylinders. They don't merge until after the firewall.  It was very noticeable, especially with another 25 to compare to in the garage.

I have the HKS style split pipes as well so it is a bit louder, but it all bolted straight up to the single cat location :rofl:

So while some of these other points are slight contributors, it's mainly the turbo configuration. And, It sounds PHAT as hell ;)

I also have a RB25DETT but in a RS13 and it doesn't sound quite the same as an RB26DETT to me. I suspect the RB26's throttlebodies are the main reason.

A RB25DETT does sound gorgeous though, a bit higher pitched than the GTR's I've been in.

  • 6 years later...

Bit of an oldie but i have a question!!!!!!! - My s14 (rb25det) seems to sound like some sort of angry whippersnipper ?!

6boost mani, 3 inch dump/front into cat, then 3 inch all the way to some weird twin pipe muffler thing(xforce? - its sh^t) ive dropped it at the diff before (removing the last muffler) and the whippersnipper just gets angrier and begins to sound like a rally car.....has anyone else experienced this lol?

Aiden

no one has mentioned the difference in stroke with each rb, the rb26 to me sounds more like a motor bike with its shorter stroke, the rb25 is shorter and the rb30 shorter again, so maybe its the stroke that play a big role as well as the compression ratio's of each rb.

Ive noticed the turbo makes a big difference as in how well it flows and spools makes the sound of the gases both intake and exhaust rush in and out faster making it sound really angry or a bit soft..

no one has mentioned the difference in stroke with each rb, the rb26 to me sounds more like a motor bike with its shorter stroke, the rb25 is shorter and the rb30 shorter again, so maybe its the stroke that play a big role as well as the compression ratio's of each rb.

Ive noticed the turbo makes a big difference as in how well it flows and spools makes the sound of the gases both intake and exhaust rush in and out faster making it sound really angry or a bit soft..

:huh:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • They also make them with the motor mounted on the side 
    • Just be warned that that turbo will not be a direct re-fit to the car. The exhaust housing is, of course, in the same place. It has to be - it's bolted to the exhaust manifold. So the dump will fit up. But the centre housing is not as long, so the comp housing will move backwards. This will affect both the turbo inlet and the outlet. There is fab work that needs to be done. Yes. it has one, it should have one. Paper gasket.
    • I only recently purchased the vehicle, it came with the flex setup but the current tune is e85 only, which is why im wanting to get the tune redone to enable a mixture.  First i need to get the exhaust redone tho. I was thinking of getting a varex muffler but it sems they dont fit well in the 33 (hang low because of the valve mechanism which sticks out on top) and generally dont sound good. So that leaves me with redoing the entire exhaust (more resonators and mufflers) so its not a menace when i come and go from home, and then have the aes dump valve somewhere along the line to really open it up. I was thinking of having it before the cat but after seeing how insanely loud it will be (on a vl turbo) im thinking of putting it more towards the rear of the car, after one of the resonators. 
    • At this point I'm just 'hoping' it's the turbo seals. I did speak to someone who said it's normal for these turbos to have a bit of axial play? Not gonna lie I've never checked a turbo for axial play before but you could hear it tapping a bit as I moved it back and forth. Surely that's too much? My theory is (could be completely wrong), bad axial play, worn bearings, bad seals, oil into dump/compressor side, burns in exhaust = blue smoke. On a timing belt related note, my crank pulley was missing that front plate that sits in front of the timing belt. It's that metal round plate. It did have the rear one, and the woodruff keys are in the crank which was nice. Can anyone confirm if the NEO det engine has a front plate, im sure it would to protect the front of the timing belt or something. Water pumps...the pump I got was an NPW (yes grill me if I should've got a genuine one lol). It has a smooth mating surface, kit came with a pretty pathetic looking paper gasket. Do I need to use any RTV or just trust the gasket will work because its a smooth mating surface? Cheers legends have a good Easter break!
    • Cheers man, I thought the same.   Bit of an update on it all. It was definitely blue smoke, not grey after all. It didn't really smell oily but it was blue after all. Also puffing just the smallest amount on idle with no throttle.   I ended up pulling the intake and exhaust off and there was around 3mm of axial play on the turbo shaft. So I figured we'll that's buggered and sent it off to get hi-flowed at hypergear. Haven't got it back yet.   I haven't compression tested it yet. Had a look in the cylinder and cylinder 1 spark plug, looked a bit sooty but not oily. Then I've just started doing my timing belt because it's age is unknown.
×
×
  • Create New...