FATGTS-R Posted May 17, 2005 Share Posted May 17, 2005 One of the next things I plan to do with my car is install some cam gears so have begun to do some research. MATERIALS: Looking at the advertising speels a lot of companies (recently HKS comes to mind) promote the materials they use citing fancy metal names (duralymium sp?) that the layman has never heard of. Why? Do cheaper, supposedly less quality gears brake, wear out etc? I ask as my car is from 1987 with what I assume are the original factory gears and they look fine. What are the factory ones made of? DESIGN: Cruising around the net looking at images of different brands of gears the one that stood out as odd was HKS in the fact they only have 3 bolts to tighten the adjustable part as opposed to most others having 4 or 5 and I think I saw one with six. Isnt it obvious that the more securing bolts the better? Or am I missing something? Why would HKS, a supposedly reputable a/m parts supplier skimp in that area? FAILURES: Lastly, who has had a bad expereince with cam gears? Either failure of some sort, premature wear etc? What exactly happened and what brand were they? Just hoping to get some decent feedback and maybe help a few others who want more than an anodised cog that matches there colour scheme. Also would like to hear from people who have had custom cam gears made. Material used, pricing etc. Thanks in advance. Jayson. Link to comment https://www.sau.com.au/forums/topic/73956-cam-gears-materialsdesignfailures/ Share on other sites More sharing options...
inissane Posted May 17, 2005 Share Posted May 17, 2005 yeh i did a search on this and ur r spot on, HKS ones are reasonably priced look good but only have three bolts which may or may not move under high stresses other ones like dunno Trust or Tomei?? maybe they are the bet Link to comment https://www.sau.com.au/forums/topic/73956-cam-gears-materialsdesignfailures/#findComment-1358000 Share on other sites More sharing options...
MSRB26 Posted May 17, 2005 Share Posted May 17, 2005 Although not from personal experience i have heard of failures with HKS gears on more than one occation and it has always been related to the teeth on the gear as the material seems to be too soft and wears quickly. Has anyone else heard of this? I am currently using Tomei and have had no issues. Link to comment https://www.sau.com.au/forums/topic/73956-cam-gears-materialsdesignfailures/#findComment-1358210 Share on other sites More sharing options...
pnblight Posted May 17, 2005 Share Posted May 17, 2005 the early HKS gears do wear to quickly The Tomei units are in a word awesome, you will not go wrong with them or the OS Gikens pete Link to comment https://www.sau.com.au/forums/topic/73956-cam-gears-materialsdesignfailures/#findComment-1358215 Share on other sites More sharing options...
Amaru Posted May 17, 2005 Share Posted May 17, 2005 On the "series 1" design of the HKS cam gears, the metal used for the teeth the belt sits on is too soft, and I have seen a few which have worn away pretty quickly (under 15,000kms). You can identify the series 1 design as having the purple center and blue outer edges. The "series 2" design is made out of the same metals as Tomei's cam gears, and I havnt heard or seen any problems with the Tomei ones. Link to comment https://www.sau.com.au/forums/topic/73956-cam-gears-materialsdesignfailures/#findComment-1358308 Share on other sites More sharing options...
MSRB26 Posted May 17, 2005 Share Posted May 17, 2005 Cool, so i'm not the only one who has heard that. I'm assuming this is the new colour scheme for the 'series 2' HKS gears? Link to comment https://www.sau.com.au/forums/topic/73956-cam-gears-materialsdesignfailures/#findComment-1358329 Share on other sites More sharing options...
confuzion Posted May 17, 2005 Share Posted May 17, 2005 yup thats the new ones made of duralim or however you spell it. Link to comment https://www.sau.com.au/forums/topic/73956-cam-gears-materialsdesignfailures/#findComment-1358339 Share on other sites More sharing options...
Jordan Posted May 18, 2005 Share Posted May 18, 2005 Its only the material for the teeth that were changed, funny that. Link to comment https://www.sau.com.au/forums/topic/73956-cam-gears-materialsdesignfailures/#findComment-1358490 Share on other sites More sharing options...
BezerkR32 Posted May 18, 2005 Share Posted May 18, 2005 Did anybody experience the cam gear adjustment moving? Link to comment https://www.sau.com.au/forums/topic/73956-cam-gears-materialsdesignfailures/#findComment-1359029 Share on other sites More sharing options...
djr81 Posted May 18, 2005 Share Posted May 18, 2005 Duralium is simply a variant of aluminium that has increased wear resistance due to its hardness (As the name suggests). Tomei have used it for ages & now HKS have come into line. If you are worried about wear the answer is pretty simple: LEAVE THE TIMING COVER ON YOUR ENGINE! Link to comment https://www.sau.com.au/forums/topic/73956-cam-gears-materialsdesignfailures/#findComment-1359037 Share on other sites More sharing options...
predator Posted May 18, 2005 Share Posted May 18, 2005 I would have thought a lot of the wank associated with the material would also be for weight reasons. Less weight = less reciprical mass on the drive system, which is a good thing. I would have also thought 3 bolts was pretty strong to hold the whole gear in place, considering your tensioners only have one. Bolts don't often snap unless put under extreme heat, in front of the engine is relatively cool (otherwise the timing belt would also be not be made of rubber in this case) If you are worried about wear the answer is pretty simple: LEAVE THE TIMING COVER ON YOUR ENGINE! why? wouldn't it make more sense to leave it off so you can spot the wear? or is that what you mean?? Link to comment https://www.sau.com.au/forums/topic/73956-cam-gears-materialsdesignfailures/#findComment-1359294 Share on other sites More sharing options...
MSRB26 Posted May 18, 2005 Share Posted May 18, 2005 why? wouldn't it make more sense to leave it off so you can spot the wear? or is that what you mean?? I would assume he is saying to keep the cover on to prevent dirt etc from getting on the teeth which would create premature wear? Link to comment https://www.sau.com.au/forums/topic/73956-cam-gears-materialsdesignfailures/#findComment-1359334 Share on other sites More sharing options...
Sydneykid Posted May 18, 2005 Share Posted May 18, 2005 Leaving the cam belt cover off lets dust and dirt in, wears the belt and cam gears very fast. I have even seen a small rock get caught in between the belt and the pulley, ripped the belt to pieces. And many valves hit many pistons. The Stagea needed a cambelt service, so I figured I might as well stick an adjustable exhaust camshaft pulley on there while I was doing that. I ordered a Tomei pulley from Nengun, but apparently they don't make them any more. So I opted for a HKS one made of the new material. It weighs 350 grams (standard camshaft pulley is 550 grams) which is quite a bit lighter than the Jun ones I have that are going on the new RB31DET. I haven't done a propper hardness test on the teeth on HKS pulleys, but the scratch test comes up pretty good. I am not concerned with 3 bolts, I always use Locktite on them anyway. Link to comment https://www.sau.com.au/forums/topic/73956-cam-gears-materialsdesignfailures/#findComment-1359372 Share on other sites More sharing options...
inissane Posted May 18, 2005 Share Posted May 18, 2005 so we are saying any aftermarket cam gear will do if installed with locktite on those bolts and the cam belt cover on?? Link to comment https://www.sau.com.au/forums/topic/73956-cam-gears-materialsdesignfailures/#findComment-1359612 Share on other sites More sharing options...
sky30 Posted May 18, 2005 Share Posted May 18, 2005 The OS giken cam gears are made out ouf the same material as the Tomei gears, but are alot cheaper in price, almost half the price. Link to comment https://www.sau.com.au/forums/topic/73956-cam-gears-materialsdesignfailures/#findComment-1359722 Share on other sites More sharing options...
pnblight Posted May 18, 2005 Share Posted May 18, 2005 The OS giken cam gears are made out ouf the same material as the Tomei gears, but are alot cheaper in price, almost half the price. damn you must be getting your os giken cheap cos i payed under $200 a piece for my tomei wheels Link to comment https://www.sau.com.au/forums/topic/73956-cam-gears-materialsdesignfailures/#findComment-1359950 Share on other sites More sharing options...
sky30 Posted May 19, 2005 Share Posted May 19, 2005 I paid $350 for the pair of OS giken gears and got quoted $600 for the tomei pair, Link to comment https://www.sau.com.au/forums/topic/73956-cam-gears-materialsdesignfailures/#findComment-1361580 Share on other sites More sharing options...
treo Posted May 19, 2005 Share Posted May 19, 2005 i got my os giken adjustable cam gear $120 brand new in box privated on Firesport.com, i two used locktite however left my top cam cover off. I dont see this to be a problem dont live near salty water and i know not to put my hands there so i see there to be know real problem Link to comment https://www.sau.com.au/forums/topic/73956-cam-gears-materialsdesignfailures/#findComment-1362578 Share on other sites More sharing options...
Sydneykid Posted May 19, 2005 Share Posted May 19, 2005 i got my os giken adjustable cam gear $120 brand new in box privated on Firesport.com, i two used locktite however left my top cam cover off. I dont see this to be a problem dont live near salty water and i know not to put my hands there so i see there to be know real problem The RTA are resurfacing the road near my house, I found a small rock on top of my airfilter last week. Be carefull:cheers: Link to comment https://www.sau.com.au/forums/topic/73956-cam-gears-materialsdesignfailures/#findComment-1362924 Share on other sites More sharing options...
proengines Posted May 20, 2005 Share Posted May 20, 2005 How many engines would be missing their cam belt covers if adjustable timing gears were matt poo brown rather than pretty anodised purple or blue or gold? Link to comment https://www.sau.com.au/forums/topic/73956-cam-gears-materialsdesignfailures/#findComment-1364654 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now