Jump to content
SAU Community

Recommended Posts

Not sure where this goes.. but for NSW members..

Just an expression of interest for the new Jaycar 4x100W amp?

http://www1.jaycar.com.au/productView.asp?...x=&SUBCATID=443

Specifications:

Power / channel @ 4ohm 14.4V: 130WRMS x 4

Power / channel @ 2ohm 14.4V: 190WRMS x 4

Power / bridged @ 4ohm 14.4V: 380WRMS x 2

Signal/Noise ratio: >90dB

Input sensitivity: 200mV to 5V

Low pass filter: 50 - 500Hz @ 12dB/octave

High pass filter: 50 - 500Hz @ 12dB/octave

Pass thru RCA: Yes

Dimensions: 400(L) x 258(W) x 50mm(D)

On the site it says 5+ units = $239.00, RRP for one is $299

Make comments and suggestions...

---------------------------------------------------

So we have:

Me x1 Pickup @ Dundas - CONFIRMED

DLuded x1 ____ - CONFIRMED

ven x1 ____ - CONFIRMED

Complexity x1 - Ill deliver to him - CONFIRMED

Mr Ed32 x2 - Ill delivery to him - CONFIRMED

sindows x1 - Show & Shine - CONFIRMED

OUT:

fresh x1 - Show & Shine

b0neR x1 _____ -

elim x1 - Pickup from d00dz

Need a few more people. So that late commers can catch in on this. The $190 + 10%GST is very nice.

Link to comment
https://www.sau.com.au/forums/topic/74173-eoi-jaycar-amp-group-buy/
Share on other sites

  • Replies 94
  • Created
  • Last Reply

Top Posters In This Topic

I've got a trade account so I can get em for ya cheaper if you want them.

If you buy 1 or 2 its $211

If you buy 3 its $200

If you buy 4 or more its $190

plus GST (so add 10%)

Hey I'd be really keen for one of those amps at $190 + GST ($209), that is an aboulute bargin. I have read a few reviews and they all say you cant beat the value for money, so for $209 how could you go wrong.

Only problem I'm in Brisbane, what do Jaycar do about shipping? Could we organise the buy so I could pick mine up from a Brisbane store?

im in for sure.. need one of these puppies to run my speakers.... i have one just for my sub.....(older model)

330W rms x2

DVC sub......

660W RMS into a sub......

1320W when cranking.... you do the math...

Got heart attack :rofl::D:D:D:D:D:D:D:D:D:D:D:D:D:D

So when can we get one of these babies.............

;)

Ed

funkymonkey: I dont mind picking mine up. Hope you doing mind ordering, the prices are a bargin.! +10% GST.

JCMarshall_Law: I could possibly post it out to you, but you need to work out if the postage outweights the saving or not.

So we have:

Me

JCMarshall_Law

Mr Ed32

b0neR

DLuded

sindows

Need a few more people. So that late commers can catch in on this. The $190 + 10%GST is very nice.

As for other amps? Im not sure I guess you can order them through funkymonkey. Its basically up to him.

yeah no worries, I can order em for ya. You need to organise purchases and when you're ready to put deposits I'll PM you guys my bank acct. After that its a 3 day wait for the items to arrive, and then you guys can come and collect em from my parent's place in Dundas (my house is in melb n all :)).

yeah no worries, I can order em for ya. You need to organise purchases and when you're ready to put deposits I'll PM you guys my bank acct. After that its a 3 day wait for the items to arrive, and then you guys can come and collect em from my parent's place in Dundas (my house is in melb n all :)).

Very Very interested...

Tell me when...

is it 2x360RMS?

I'm going to post a similar group buy in QLD section, I'm sure we can get more than 4 people interested, and I'm sure there is someone with a trader account on the QLD forums.

Its prolly not worth the bother / cost to get one up from Sydney.

BTW: Funkymonkey, what do you have to do to get a trader account with Jaycar?

You have to buy a shitload of stuff from em? I get all my stuff thru my company. Jaycar's warehouse is based in Sydney, so you HAVE to pay for freight regardless if you're in QLD.

Hey, funkymonkey

I'd still be keen for this group buy if you are willing to ship mine to brisbane (I'd pay for it of course). That depends on it still being worth it - I presume it will not be more than $10 to ship to Briz. What is the likelyhood of Jaycar shipping direct to me?

I'm after an amp but I'm not sure what I would require for the sub I have.

ROCKFORD FOSGATE 12"

RFP1212

2 x 4 Ohm Nominal Impedence.

Power Handling 400 Watts RMS/800 Watts Peak.

88.7 dB Sensitivity.

2.5 Inch Voice Coil Diameter

I also have some JBL speakers for front and back. I think fronts are 50W RMS - 150W Peak and rears 60W RMS - 180W Peak or something similar. I can find out exactly if needed.

Can someone help me with what I need. Thanx.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • OK, that is a helpful description, because that sounds exactly like a bleeding issue in the clutch....these are hard to bleed manually even when the damping loop has been removed. I'd suggest bleeding again....start by filling the master cylinder up and opening the bleed nipple. Come back and check every now and then that the master cylinder is not empty. Let it gravity bleed for a few hours and see if that improves
    • I replaced the whole clutch line with the chase bays braided hose, I think it removes that loop, is it the short hose that comes immediately off the slave or is there a drawing in the manual to find what you’re referring to? It was just re-bled when I upgraded to the nismo slave, old slave worked fine but I thought that might help, didn’t change a thing. It’s like the first half of the pedal is pushing air and then when it finally actuates the master the friction zone is tiny. Makes it practically impossible to launch the car
    • Yep, that was one of the things we learned fast in the past with our MX5. When you drive with the top down, you are effectively standing out in the sun, 100% of the time, and not getting in any shade (because roads aren't shaded generally!). Just like standing out in the middle of a field on a sunny 27C day is a bit of a bad plan, so is sitting in a MX5 without sun protection.
    • I also just ordered some Frankenstein bolts and side mounts to fit a hard top Just in case I do find one, basically so it doesn't need to be fixed to the car with only the front latch.......and then gaffa tape to keep it in place for the RTN journey from wherever I get it
    • If your temps are fine now, you probably won't have any issues with where your vents are as they don't look right up at the windscreens high pressure area, so any differences when giving it the beans for extended happy laps would be minimal, but, they should vent heaps when stuck in traffic  Much like how that reverse cowl on my SS let "visible" heat out when stationary, but, because it was basically at the windscreen my coolant temps on the Hwy actually raised because air was being fed into it at speed (110kph), to only come back down to around 90° when I got off the Hwy And your 100% correct about the NC currently not needing vents, but, if I was to add a turbo, and a oil cooler and intercooler in front of the condenserand radiator, and then take it to the track???? It is apparently a recommend requirement if I don't want to worry about coolant or oil temp issues, but, any of the above are possible scenarios, over time As it sits now, with the triple pass radiator and stock air conditioning system, I have absolutely no issues with either temps or air conditioning efficiency, I've been basically daily driving thie car for the last month, both on the Hwy, and peak hour, bumper to bumper traffic, but, that's pretty much expected from basically a standard engine  Talking about no issues daily driving, it was 39° the other day and I was sitting in bumper to bumper traffic on the M5 and then M7, with the top down, and with the air conditioning blowing nice cold air on my feet, balls, and face, well, there was one issue, my head and arms got pretty sun burnt Note to self: leave a hat and sunscreen in the car for such days 🤣
×
×
  • Create New...