Jump to content
SAU Community

One step closer to widebody R32 :D

funkymonkey

By funkymonkey,
in Victoria

 Share

Recommended Posts

funkymonkey Grand Master

funkymonkey

Posted
  • Author
Posted

meh don't really care what wheels go on the 86 atm. Just wanna get the engine and the drivetrain working properly. Looking around for a 1.5 or 2 way LSD in japan that'll fit the existing solid rear axle, if not chuck it out and put the hilux diff in. But its already got disc brakes so it might turn out to be a Jap diff, in which case any Kaaz or TRD or any other LSD make in japan should fit it. Got a sawsall as well in the workshop, so we should be able to do some ghetto widebodying if required.

I guess I should get them tanabe rims or someshit to fit in with the rest of the AE86 fanboys, I'd prefer some gram lights or some proper lightweight forgies but the way I drive and the cost don't make it a sensible choice :)

Anyways, narkeh, so did you get that shell or what? quit being such a procrastinating bitch and just stick to something, one minute you want an uber ceffy, then you want a vip cima, now you want an ae86 project. if thats what you decide on, you might as well wait for mine to be finished so you know what to and what not to do.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R32 Skyline Handbrake Question

      By GTSBoy · Posted

      That's f**ked up. I'd guess it's more likely that you have an entire S13 subframe in there. Does it still have HICAS mounting points? Seeing as it is quite possible that yours is the only such converted car in the world, you'll probably struggle to find someone who can tell you from direct experience. 'Twere I you, I'd be looking for 4 stud Skyline rear brakes and convert back. At a minimum. Preferably go find all the stuff you need to put it back to 5 stud (assuming you're happy to change wheels) and upgrade to some decent brakes. You don't even need much stock stuff. Don't need calipers or rotors, as you can go fully aftermarket. Just needs hubs and the other bits and bobs that are different to what you have now.
    • GTSBoy
      R34 GTT idle problem

      By GTSBoy · Posted

      The engine has nothing to do with it. The physical space behind the headlight is the limiting factor. And the height. The height of the NS70 is the same as stock. So the clamp bar across the top goes on nice. The battery tray is big enough for it to sit on. The X is for extra capacity - it has even more lead in it than the non-X NS70. Heavy f**ker. But it's not a track car, so I will suffer a couple of extra kg. In the case of the R34, maybe the physical space there is not as deep (forward-backward, not up down). Hence why they say the 60 is the biggest. But I would never trust a catalogue to tell me what will fit. I have the car. I have the existing battery. I have the tape measure. I have the dimensions of all the available batteries. I find the biggest box that will go in. (With the right terminals in the right places, of course).  
    • elinde
      R32 Skyline Handbrake Question

      By elinde · Posted

      Hello! I have been having a hard time finding the answer to this question… I have a R32 GTS-T Sedan than has been 4 lug swapped using S13 hubs, rotors, and brakes. The front has also been converted to S13 suspension.    When the swap was completed, the handbrake cables were never hooked up, as the S13 rear calipers are the “handbrake”, and not the typical drum on rotor that the R chassis are. Does anyone know handbrake cables that will work for this conversion? I’d like to not use a hydraulic handbrake and stick with the traditional cable style. My original thoughts were to go with S14 cables and try to make them work, since I’m pretty sure S13 cables will be too short.    Any help would be appreciated!
    • silviaz
      R34 GTT idle problem

      By silviaz · Posted

      I did some research, considering you have a neo engine, how is that battery compatible? I checked centuries website and super cheap and says it's not compatible. Only this full size one is. https://www.centurybatteries.com.au/products/ns60-mf
    • Kinkstaah
      Help Understand GTT Boost Setup

      By Kinkstaah · Posted

      No, lets be honest here. I went to Winton and did a track day, for all the mods and V8 power and craziness I posted up a time that a K24 stock motor Honda Accord can do on the same tyres (narrower, too) 250kw and learning how to drive the f**kin thing is the sweet spot.
×
×
  • Create New...