Jump to content
SAU Community

Recommended Posts

i had one fitted to my r33. brand new. here is what the costs were

$350 core

$400 ish for pipes and bends and the coupler orange/blue silicon joiner things

$510 labour to fit and weld up pipes and cut front bar. cut hole below wiper tank, bolt on cooler, wled up pipes (stainless steel) and connect all the pipes.

$1260 drive in, drive away fitted. the core is 500x300x75 or thereabouts

fitted at chasers in melbourne

There are a few options for the 33

Trust V-SPL Intercooler Kit for Nissan Skyline GTT Price: $1299

Complete kit - Inlcudes all piping & fittings

XTR Front Mount Intercooler Kit for Nissan Skyline GTS-T Price: $1395

Complete kit - Inlcudes all piping & fittings

Blitz LM Intercooler Kit for Skyline R33 GTS-T & R34 GTT Price: $1695

Suit RB25DET

There are a few options but for the dollars u cant go past the Trust FMIC

Troy

what do u think would be a resenaouble price to pay for an intercoolr mounted and all in a r 33?

you would be crazy to pay more than about $800

just because it has a brand name or comes in a kit doesn't necessarily make it any better than if you buy a hybrid and get soem pipes made

myself? i bought the cooler for $400, pipes and fitting was $260... totl = $660

yes, there are some bad cheap intercoolers going around (eg ex-truck coolers) but there are also some decent ones (eg hybrid)

some people have more "dollars than sense" and will pay an extra $500-1000 just for a brand

Warren.

you would be crazy to pay more than about $800  

just because it has a brand name or comes in a kit doesn't necessarily make it any better than if you buy a hybrid and get soem pipes made

myself? i bought the cooler for $400, pipes and fitting was $260... totl = $660

yes, there are some bad cheap intercoolers going around (eg ex-truck coolers) but there are also some decent ones (eg hybrid)

some people have more "dollars than sense" and will pay an extra $500-1000 just for a brand

Warren.

where did you get pipes and fittings for $260 man thats cheap

Its not just the brand

Its the quality of the fittings the pipes and the finish

Sure u could hack one together urself but im sure it will be no where close to the quality of a proper kit such as one from trust...in terms of finish, fittings, mounts, clamps, hoses etc

If u had to piece one together urself that can match the quality, it will either cost just as much money, or alot more effort on your part.

The Blitz kit that I was extremely high quality, so good in fact that I was able to fit it myself and there was no cutting, drilling, cable tieing or duct taping required. It basically fell into place. It also only took me about 5 hours to fit once I worked out the instructions.

I heard the Hybrid and there copies were not that good a quality and some of them tend to whistle when driving.....any truth to that or is it just talk? Also the pressure drop on a Hybrid was alot greater than the jap brands? I guess you get what you pay for huh!

A few peeps i know have Hybrids and Hybrid copies and a couple of them whistle. It depends on how much core area is exposed to direct air intake and for a FMIC to work properlly the more are the better. You can't really hear it over the engine/exhaust noise and then with the stereo on its not even there. But you can hear it if it whistles during everyday normal driving.

I was having a look on www.driftbits.com.au and they have spme pretty good kit prices on there at the momnet. I think it was $680 for the R32, R33 kit for memory

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...