Jump to content
SAU Community

RB20 Performance Package - Turbo, Dump, FMIC, Piping

masTers
 Share

Recommended Posts

masTers Mentor

masTers

Posted
Posted

Hey guys, due to 2.0l not being big enough for me, Ive got the following package up for sale. The turbo is under 2000kms old.

RB20 Turbo - Hi flowed by Australian Turbo Sales, brand new t3 exh housing modified to accept VL exh wheel, brand new center bearing section, std rb20 comp cover machined to accept the largest avail t3 comp wheel. Made 250rwhp on 1 bar on a NICS RB20. So should be good for a bit more on a R32, and is capable of more than 1 bar of boost, as it has Steel wheels. Larger than a standard RB25 Turbo.

Trust/Greddy VSPL FMIC Kit - Brand New, Bar & Plate core, with piping, clamps, brackets, etc to suit a HCR32.

MildSteel Custom Dump Pipe, to suit above Turbo. 3" to Cat.

GFB Boost Bomb - Boost Controller.

$2250 Firm Delivered to your door, anywhere in Australia.

PM or Reply if Interested.

This with a 3" Cat-back, GTR injectors and fuel pump, and a S-AFC tune should prove to be a potent package :)

Link to comment
Share on other sites
GOR33 Mentor

GOR33

Posted
Posted

Hey bro,

Interested in the gear. The NICS engine is the RED TOP RB20DET isn't it. I have an R31 GTSX and was wondering if this Turbs would bolt straight up as mine is on it's way out.

Will be ready to buy something in the next week/week and a half. Can you reply to my email bro? [email protected]

Cheers

Link to comment
Share on other sites
GOR33 Mentor

GOR33

Posted
Posted

Me again,

Will be ready to buy in a few days. Where are you located? Very interested in all the gear! Is it all in good condition. Sorry for all the questions. First time buying off a forum. Bit worried...

I'm on the Gold Coast.

Cheers man

Grae

ps: this is my mates id i'm using.

Link to comment
Share on other sites
locograe Contributor

locograe

Posted
Posted
Hey guys, due to 2.0l not being big enough for me, Ive got the following package up for sale. The turbo is under 2000kms old.

RB20 Turbo - Hi flowed by Australian Turbo Sales, brand new t3 exh housing modified to accept VL exh wheel, brand new center bearing section, std rb20 comp cover machined to accept the largest avail t3 comp wheel. Made 250rwhp on 1 bar on a NICS RB20. So should be good for a bit more on a R32, and is capable of more than 1 bar of boost, as it has Steel wheels. Larger than a standard RB25 Turbo.

Trust/Greddy VSPL FMIC Kit - Brand New, Bar & Plate core, with piping, clamps, brackets, etc to suit a HCR32.

MildSteel Custom Dump Pipe, to suit above Turbo. 3" to Cat.

GFB Boost Bomb - Boost Controller.

$2250 Firm Delivered to your door, anywhere in Australia.

PM or Reply if Interested.

This with a 3" Cat-back, GTR injectors and fuel pump, and a S-AFC tune should prove to be a potent package :(

OK! Got funds. I know you said firm with the price but is there any way you can move at all. I can deposit $2k into your account on Wednesday...if you accept.

Cheers mate

Locograe

I was using my mates id on saturday. GOR33.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • sonicii
      2020 Nissan Skyline 400R V37/Infiniti Q50 RS insurance in NSW

      By sonicii · Posted

      As far as I know, Infiniti stopped importing vehicles before 2020, even though they were still selling their stock for at least a year or 2 after that, they were older build years, therefore, you can import a 2020 400R, because you couldn't buy an AuDM 2020 built Q50 RS. As for insurance, you might need to go through one of the enthusiast insurance companies, they tend to insure a lot more grey import models than the mainstream insurers as Duncan mentioned.
    • araiko
      Importing from the US into W.A - 15 yo old car

      By araiko · Posted

      loved seeing the zenvo on the a1 just after the hatfield tunnel i was the guy in the white van trying to egg you on it sounded awesome and those exhausts glowing red inside insane cheers for the thumbs up tim and tom.
    • DraftySquash
      Question about R34 GTT A/T Solenoids

      By DraftySquash · Posted

      So.... when I'm finally getting around to having my power steering leak sorted, now it looks like I've got the same issue most A/T Skylines are having. My A/T light will randomly come on and I'm stuck in 3rd gear until I turn the car off and on again. Only 3 weeks ago I did a complete transmission service: Oil flush + new gasket + new filter. This came out of nowhere!! It wasn't like the car was driven hard. I drove about 3 mins down the road to get fuel and boom!!!  Anyway, I have a few questions and hope you fine people can help me out here. All questions are in red. 1. The solenoids: I was looking at the parts catalogue in Amayama and I could only find the Solenoids as an assembly. https://www.amayama.com/en/part/nissan/319404ax05 I read in another thread that Solenoid A = 31940-4AX02 & Solenoid B = 31940-4AX05 but the Amayama product has only the code of B. Is this the right part? Can anyone who has done the Solenoid changes or seen them confirm if this is the complete set of A & B?   2. Gasket and Filter: I'm not going to try change the solenoids myself because it seems difficult to do in a home garage with just 2 jack stands. I plan to take it to a shop and get it changed. I was also going to buy the transmission sump gasket at the same time so I don't reuse the same gasket. Should I just use the existing gasket as it has only been on the car since OCT 19th? (~3 weeks) Should I be buying a brand-new gasket and a filter? Does this job involve taking the filter out?   Thanks in advance to everyone. It's hard to find a video of someone doing a solenoid change on a R34 so any help you can give answering my remaining questions would make me less stressed.
    • Kinkstaah
      R34 GTT RB rough idle problem with weird RPM gauge fluctuations

      By Kinkstaah · Posted

      Yea - From what I have seen from the video, the car idles like any R34 lol 50PSI of fuel pressure is hardly super abnormal, the regulator is working because the pressure remains static when the throttle gets revved, i.e pressure remains the same when manifold vaccuum changes. Bigger pumps on stock rails always bumped the pressure in the rail without using an aftermarket regulator to change that. Do you know what your IAC is actually doing? Has there been any data showing the stepper motor % etc? There's no way your idle is actually moving around the way the cluster(s) are indicating. You would hear the difference with the engine RPM flying to 3k and 1k in mere seconds. I'd be checking the wiring to the tacho. What the tacho is telling you and what the engine/ecu is telling you are different things. I assume your ECU doesn't display the spike. So whatever is telling the tacho to be at X rpm is doing something weird. When the going gets insane, you're on the wrong path. You've ruled out plenty of things that are working correctly/aren't the issue. Your idle isn't doing what the tacho is indicating. You have two seperate issues, I don't think they are linked, and the idle seems reasonably okay unless it's stalling which.. well, it hasn't. Troubleshoot the stall if it occurs by figuring out what your IAC is doing vs what it is being told to do.
    • PranK
      R’s Meet - Fuji speedway 2024

      By PranK · Posted

      So awesome! I love the RB with the exhaust on display.
×
×
  • Create New...