Jump to content
SAU Community

Recommended Posts

Hi All,

Container has cleared.

BNR32 front cut.

300kph speedo, oil catch can, greddy profec b spec 11 brand new, seats (need retrim) strut brace, ARC airbox, ARC dual entry drag cooler (600x300x100), greddy hard pipe kit, brembo brakes on front, std on back with drilled rotors, hight and damper adjustable OHLINS sus, rear diff, bonnet with nismo lip, rear quarters. Blitz computer $10,000

1 x 91 180sx red top manual cut $4000.00

1 x 91 S13 red top drifter front cut $4200.00

1 95 180sx black top sr20 front cut $4500.00

1 x Galant VR4 fron cut with fmic and other goodies $3500.00

1 x 97 WRX front cut, excellent condition $3500.00

1 x levin 20v front cut $1950

1 x levin 4agze front cut $2450.00

BNR32 Veilside stainless steel exhaust front pipes back $1200.00

FD3S titanium exhaust $1500.00

Rays gram lights (gold) suit soarer supra. 17*8, excellent condition $1500.00

Tien HA with adjustable tops suit MR2GT $1000.00

other exhausts and bits and pieces.

Will post up pics soon. Not seperating cuts. Cuts come with brakes, diff and suspension.

Some panels available, please PM.

Cheers,

Ken

Link to comment
https://www.sau.com.au/forums/topic/74278-container-has-arrived/
Share on other sites

  • Replies 91
  • Created
  • Last Reply

Top Posters In This Topic

i need r32 gtr parts

intercooler, radiator, condenser and fan, the plastic pipe that sit behind the intercooler connectting the plumback bov to the air intake, bumper reinforcement and maybe bumper if price is reasonable or a complete nose cut

pm asap

Any turbo-back exhaust systems?

Only cat back apart from the Veilside Evolution exhaust which is for a BNR32 and has front pipes back.

What are you after?

Ken

All PM's and emails replied.

Was after a cheap exhaust system for R33. What's your range of catbacks?

I have exhausts for:

R32 gtst

R32 gtr x 2

VR4 galant x 1

180sx x 2

S13 x 1

WRX x 1

FD3s titanium x 1

No 33's sorry, will get some next trip though.

Cheers,

Ken

have any r32 gtst aftermarket front bumpers?

or an r32 gtr front bumper?  

any condition...

can PM me or email warren_clements AT hotmail.com

Sorry mate, not front bumpers for r32.

Next container maybe!

Cheers,

Ken

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • I know this one’s the BB one. My tuner did make mention about the actuator. I am curious about the VCT as well
    • Might also needs a stronger actuator with the right preloading. With older 2019 built bush G3 units, BB upgrade or 21U housing down size makes a pretty decent gain in response as well. 
    • Hey lads  so im finally putting together my rb30 forged bottom end and ran into an issue. I measured my main bearing clearance with arp main studs torqued to 60 ft-lbs using ACL H series STD size bearings and standard, un-ground crank shaft journals and got an oil clearance reading of about 1.3 thou measuring straight up and down and about 2.8 thou measuring at a 45 degree angle (just above and below the parting line). My machine shop said they measured the main tunnel and it was all within spec (they didnt say the actual measurement) and to go with a standard size bearing, which i have done and the clearance is too tight, I'm guessing because of the extra clamping force from the arp studs distorting the main tunnel. I was wanting to run about 2.5 thou main bearing clearance.  My questions are: 1. could i just use the HX extra 1 thou clearance ACL bearings? that would fix my straight up and down clearance making it about 2.3 thou, but then would the side to side clearance be too big at around 3.8 thou? 2. what actually is the recommended main bearing clearance for measuring near the parting line / side to side. i know its supposed to be bigger as the bearing has some eccentricity built into it but how much more clearance should there be compared to the straight up and down measurement? at the moment there is about 1.5thou difference, is that acceptable or should it be less? 3. If i took the engine block + girdle back to the machine shop and got them to line bore the main tunnel (like i told them to do the first time, but they said it didnt need it) what bearing size would i buy? the STD size bearing shells already slide in fairly easily with no real resistance, some even falling out if i tip the girdle up-side-down. If im taking material out of the main tunnel would i need a bearing with extra material on the back side to make up for it? this is probably confusing af to read so if something doesn't make sense let me know and ill try explaining in a different way. My machine shop doesn't come back from christmas break until mid January, hence why i'm asking these questions here. TIA for any help or info 
    • I bought the model back in Japan in Feb. I realised I could never build it, looked around for people who could build it, turns out there's some very skilled people out there that will make copies of 1:1 cars or near enough. I'm not really a photo guy... but people were dragging me in a group chat for the choice of bumper as someone else saw the car before it was finished as they are also a customer of that shop. I took the photo in the above post because I was pretty confident that the lip would work wonders for it. Here's some more in-progress and almost-done pics. It gives a good enough idea as to what the rear looks like!   I have also booked in a track day at the end of January. Lets all hope that is nothing but pure fun and games. If it's not pure fun and games, well, I've already got half an engine spare in the cupboard 
    • Well, do ya, punk? Seriously though, let's fu<king go! The colour and kit looks amazing on the car. Do you have any shots from the rear? I don't quite follow how the model came around. You bought the white kit and he modified it to match your car? Looks nuts either way!
×
×
  • Create New...