Jump to content
SAU Community

Recommended Posts

i need help!!!

my car has the same idiling problem as most of the sau boys....

ive tried to fix this by cleaning the afm and other stuff along with it

tonight i decided to give the aac valve a go... so i did... pulled it out and everything.. cleaned it up with carby cleaner... put it all back together.. all workign fine... even got the idle to sit still at 720rpm

but.... now i lose heaps of power... i gave it a hit with .5bar... and felt a little bit of power loss... then i decided to give it a go at 1.0 bar .. and i can really rell the difference... i mean it takes so long to rev up to 6500 its unbelievable... i think it may have sometihing to do with what i did tonight... im pretty sure i connected everytying back up the way it supposed to be and im still checking to see if there are any leaks...

ive reset the ecu aswell... and still no powergains again... still stuck.... its almost asif the cluthc is slipping.. .liek i can hear the air going in.. but it feels liek the engines not doing anytyhing with it... i have no idea... but i think my missfiring is comming back at about 5500rpm... but ive got my plugs gaoped to .8 and tehy are brand new irridium ones too... new high flow fuel pump... new fuel filter and yeah....

its really strange... i justwant my power back for now... im over the stalling thing....

any help????

Link to comment
https://www.sau.com.au/forums/topic/74463-lost-power/
Share on other sites

yeah ... but i only started top lose power last night... after i cleaned the aac valve.... i was told that it could be still wet in the electrics still where i cleaned it.. and so one of the valves might not be opening... but i dunno... ive also been told to disconnect the plug to the acc.... i had a look at my coils... looks fine... sill clean under the boot... ive just recnetly changed the plugs... about 2 weeks ago... gapped to .8, im going to groudn the fuel pump today... but i swaer at has to have something to do with me cleaning the aac... even tho its really strange... it shouldnt really affect power should it? i thought it was just an idle control for the cars accessories and that...?

its really annoying... because i need to fix this problem as ive got a new turbo and a few parts comming in by the end of the week...

thanx for your help

Link to comment
https://www.sau.com.au/forums/topic/74463-lost-power/#findComment-1367347
Share on other sites

shit like that is so frustrating but i tell you finding the problem and fixing it is like a orgasm....lol

can the aac valve be taken out??

if so soke it in metho that will dry it out or if you cant take it out by a can of electrical cleaner that should also clean it but also dry it out

but if you have driven the car after the clean the under bonnet temps should have dried out

also coil packs can fry cuz they are electrical they can be damaged with out looking ****ed mine looked good to but after i got some new ones (second hand) made a real big diff and thay can go for no apparent reason like just out of the blue 1 of mine fizzled

now it will hit full boost again and hit redline without a prob

before would only hit 7 not 10 and would splutter after 5000 rpm apparantley very common

Link to comment
https://www.sau.com.au/forums/topic/74463-lost-power/#findComment-1367366
Share on other sites

ill try the metho and that treatment... ohh and before i had my dyno run with this.. it started to pop and sounded like miss fire after 5000 rpm... now its back again.. but not as bad..

last time i jst regapped the spark plugs.. but now its all back again...

so strange...

its a pin.. coz i need it all fixed by the ened of the week.... and really low on funds!!!

Link to comment
https://www.sau.com.au/forums/topic/74463-lost-power/#findComment-1367402
Share on other sites

ok.. ive just taken the car for a drive... seems to be sorta fixed... i get some power... but only randomly... sometimes it decides to kick in normally and some times it decides to kick in real real late... when it did kick in late.. i heard a loud pop from the exhaust... could this be fuel pump related?? im going to groudn the fuel pump now to check it out...

it could be a leak in a line...sure feels like it.. it sounds like there is one near the fuel rail... but im sure that its just the fuel going through... or the injectors making that sound... but apart from that ive checked everywhere around the car and i cant find any leaks in the lines..

but then again... could just the a valve in the acc or something not opening... as ive been told by a few people

Link to comment
https://www.sau.com.au/forums/topic/74463-lost-power/#findComment-1367498
Share on other sites

mate it all sounds so familiar but my car has been built from ground up again so ive never driven it before untill two weeks ago so for me it all seems part or the build

but i was so stoked when i found that it was the coilpacks cuz lucky i had ordered 6 new ones from SSS automotive they where only $20 each

but i know how you feel i thought it was my computer like the turbo was to big for standard but it wasnt

just coil packs and plugs

Link to comment
https://www.sau.com.au/forums/topic/74463-lost-power/#findComment-1367871
Share on other sites

yeah i had a really weired thing happened to me.... i set it on low boost... and everything was okish... it pulled and everything was fine... a lil jump with the power but yeah...

as soon as i put it back onto high boost... it felt like nothing was happening again... ive ive just groudned the fuel pump to a ground point on the car too... everything feels and sounds like its gettign enough air, and fuel into it... just that it takes so long to rev.. and the power kicks in very randomly... so your suggesting a new set of coil packs? hope it works...

Link to comment
https://www.sau.com.au/forums/topic/74463-lost-power/#findComment-1367928
Share on other sites

ok .. checked the coil packs... they are all fine... i did take off the turbo as im getting a 2540... but i noticed that a bit of oil leaked from teh silicon hose..where the pipe joins... so im guessing problems could be froma leak?

another thing... i was told that if you do anything to to afm... youll need to get it recalibrated... even if you clean it with a spray can of brake cleaner??? BAH????

oh... an another question... is a gt2540... pretty much using the standard covers for a rb25 turbo with bigger internals with dual roller ball bearings??

Link to comment
https://www.sau.com.au/forums/topic/74463-lost-power/#findComment-1369630
Share on other sites

i have reset the ecu.. , many times... yeah... some guy here in canberra says you need to recalibrate it.. but is was a bit sceptical...

i think it coudl be a combinatoini of things.. bu tthe only thing i havent tested is the crank angle sensor... but i dunno... any other suggestions?

Link to comment
https://www.sau.com.au/forums/topic/74463-lost-power/#findComment-1370203
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah kids certainly add a whole another dimension to your life.  Life ceases to be about you and more about them for a while!  And I wouldn't have it any other way.  I love watching them play sport and make new friends along the way. Wow, sounds like your mate is a good guy to know!!!  He's got some serious toys in the toy box!  Yes it would be lovely to be able to do stuff to your car without getting all tied up in boring shit like how to pay for it!!  I would describe my spending style as "aggressively spontaneous and logical but regrettable purchasing"....  That will hopefully make no sense at all which would be appropriate given that is how I buy stuff.  I'll decide at the drop of a hat that I'm buying something expensive, research the living shit out of it for 2 days straight then go out and buy it.  Then I'll have instant buyers remorse for 2 days which generally passes by the time it turns up on the front step!  If I'm feeling ballsy sometimes I'll tell my wife.  Other times it just makes its way silently passed the house and out the back to the shed, never to be spoken of again...
    • My extinguisher mounted like this unscrewed a little (Maybe from the chair sliding forward) and dumped a bit of white on my mats. I'll need to get a more narrow one for future.
    • I totally couldn't do the whole kids taking up my life thing! 😮 I find it bad enough doing 45 hours in 4 days, and then fitting normal adulting life into the other 3 with no kids! As for my mates race cars, they're AMG C63 setup for production racing. The original is what has just been stripped and a brand new shell built. The original is then going away to have some panels straightened, then it will be put back together again. Then there's a third that will shortly head off to have a roll cage put in, then build it up too. And potentially a fourth to be built too... Oh, and he has two Renault Clio D class production cars, ha ha. And when he's not racing them in the Australians and QLD production championships, he's been racing one of Chaz Mostert's Lamborghini's in GT4. They just won GT4 at the 12 hour in the Lambo. We're pushing to finish the new AMG as it has its first round (and potentially its first shakedown/outing) in under w weeks for Round one of QPC, and that round is really the shakedown to make sure it's all good for the Bathurst 6 hour, which I'll be at too. Ha ha ha Working on my project is different to his, I slowly tinker and work ways to make things happen on a shoe string budget. Hes in a good position that he has a massive workshop full of parts and tools, ha ha. He also looks after me. When his air compressor died, he just needed it working, so bought himself a new one and gave the old to me. Sand blaster unit too, and a 20t pressing. And pretty much all the shelving in my shed too as he upgraded all of his (the stuff he gave me is the expensive black Bunnings heavy duty stuff)!   I enjoy working on his stuff. No decision paralysis, and anything that's needed parts wise is just there. Plus, then I get to be hands on at the track in real racing, not just club day stuff.
    • I know which one I'd prefer to have in my garage, and which one I'd actually drive as intended
    • Yeah mate, no probs. Just swap the email addresses?
×
×
  • Create New...